Starting the C160 Transall from cold and dark in Microsoft Flight Simulator - Take 2!
HTML-код
- Опубликовано: 15 окт 2024
- After discovering that Flight Simulator had thrown a gigantic curve-ball at me in terms of the throttle configuration when I recorded the first look at the C160 Transall from AzurePoly, I thought it only fair that I re-record (Flight Simulator made a bad copy of the default controller configuration profile, which resulted in the throttle axis not working properly).
In this re-recording we go through the written checklist linked below to validate it:
ko-fi.com/jonb...
#msfs #flightsimulator #microsoft #asobo #aviation #flying #flight #aircraft #startup #procedure #checklist #learning
![ARGENTINA vs. BOLIVIA [6-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/C3wPtKNbAOA/mqdefault.jpg)
no reason to get fussed about the way you do these videos I understand them just fine thank you and am sure others as well.
It's just a case of me satisfying my own mind really :)
Hi Jonathan,,just purchased this plane and flown a short flight from Aberdeen to Edinburgh, it really is excellent and has been updated since your video, you can now fly a GPS flight plan,, I have a long way to go regarding the systems onboard but really enjoying it so far, thanks for this tutorial it's been a great help
I'll try and make some time to look at it.
Just bought it today, that cockpit is a labor of love !
I'm going to have to watch this 14 times!
Very helpful. Thank you!
Your explanation of this aircraft start up procedure is very didactic! Thank you sou much! Cheers
You're welcome :)
I’m about to buy and doing some research. I always run to your videos! Thank you bro
Well... my videos are usually just me following my nose, like everybody else :)
Wonderful !!!! 🦾🦾👌🏼👌🏼👍🏼👍🏼☝🏼☝🏼👏🏼👏🏼
Cheers
Hi Jonathan thx for this video excellent as always ....it seems a great add on, i hope that a normal flight plan and ils support will be added , but at the moment the basic auto pilot (altitude... heading) works?because i saw the ap mode on the plane ipad but i don t know if are avaiable Thank you👍(sorry for my english 😢)
Your English is very good!
Absolutely brilliant, thankyou
You're welcome :)
I actually prefer the look of this over the ATR to be honest, I don't own either at the moment but planning to. Does this one have VOR/ADF nav?
It has very basic radio nav at the moment - and no FMC yet - so no waypoints etc.
What controllers did you assign ie AlphaBravo? Also did you assign throttle, prop and mixture levers?
I don't have alpha/bravo - I have the airbus stick and quadrant.
I've had this aircraft a few weeks now and I notice that it always begins to yaw (horizontally) extensively in either direction. It happens so much that rudder input does not compensate much after a while. Is there yaw damper on this aircraft, and where is it located? It is unflyable for me until I know why this is occurring. FYI, I've used the manual yaw control on the yoke, but it only stays temporarily before going one side or another again.
I've not noticed that myself - I'll do a test flight again with it soon to see what happens. I know it's been updated a couple of times.
Hi,
I have bought Azurpoly C160 yesterday from Sim Market but it does'nt work. I can't figure out what the problem is.
The on-board tablet does not turn on. The APU switch button cannot be used, the systems cannot be started. It's like a demo version. Please help me out because I like to use this program. Maybe the registration key is missing ? I have not received any. I wonder why is it not working. It was to expensive if it 's a demo version. Please give us technical advise. Many Thanks in advance
Hi! In 1hour flying, after take-off both engines stop working.. What could the problem be?(fuel almost half, but the batteries are dry)
If the batteries are dead, you didn't have the generators on.
@@jonbeckett Those are(both generators) ON(as You teach).. I do not know what the problems could be, i do the starting procedures, as You teach in Your excellent video.. :(
Hi
I need some help. I can't get the autopilot to work properly, I followed your video to a tee but it won't work for me.
Please help !
I can get reverse, but for some reason I can't get it to move backwards... I don't get it.
Never mind.. It does *shrugs*
Thanks man this video helped me alot :)
You're welcome :)
5:28 Engine1 = G1 & G3, engine2 = G2 & G4.
Yep.
Nah... I already have c150 ... No need to buy this; the difference is only 10!!!
Thank you for the great video!
I have an "Aero" issue when i run the engines, looks like 3D thermal.
i couldn't find the solution in the settings so far, if you (or anyone) can help, i will be appreciated.
Here is the very short video;
ruclips.net/video/UFanzrXxP6s/видео.html