Some folks R lucky to have a friend that can fix anything at all. They tell me that here all the time it's just what they tell me after I hand em their bill is the catch.
Is it me, or could Elkskins pass as a Hobbit? I think he’s become a significant RUclips character. I can’t start a single piece of power equipment now without chanting “Fire it up, Fire it up”! Arrrgh.
Elkskins I am a huge fan of yours too my friend,I just recently subbed,wish I lived closer.Maybe I’ll make the trip from Woodstock Ontario,Canada,some day,be a pleasure to meet you.
I tried and tried to rebuild the Onan fuel pump using the cheap Chinese rebuild kit. I finally gave up and bypassed the fuel pump just as Taryl demonstrates in this video using the B & S vacuum pump. I had to make a gasket using a thick piece of gasket material because the old gasket was very thin and it leaked gas. I also replaced the gas line from the tank and added new plugs and a condenser. It is unbelievable how well the fuel pump bypass worked...the Sears SS16 Onan starts and runs just great.. Taryl Saved my day!
I just did this on a friend's Case 446. Worked out great. Unfortunately, this was AFTER I had installed a cheap kit to replace the original vacuum pump (like you said it worked for a while-ONE hour). Thank you so much. The Briggs pump works so well!
That is called a scrub nurse and she is just as important as the doctor is I say "she" because my old lady is one and she makes one hell of a paycheck 😂
I’ve also used them on Kohler K series and Command engines to save money over buying the mechanical pumps. They are also great when the fuel tank is lower than the carb and gravity won’t work. Thanks for sharing!
I did your fuel pump bypass. Works well. Although it was not the fuel pump. it was a cheep Chineese condenser. I put a SBC ~Blue Streak on and no more loss of power at high speed. I have a 18/6 BG/MS with a DD11 Carb
received my order from ya yesterday, coffee cup is premium, z bender is outstanding tool, and the gel lubewhat can I really say about it, excellent without the normal mess with most lubes, just aim and spray. I thank you very much for the stickers you threw in, just haven't decided where to put them yet. keep up the good work so we can keep learning double k from western pa
I did tried this repair and fuel sprays out of the air bleeder hole in the inlet cover! Should I knock out check valves? I’m not sure what to try next?
Coool. Great. Ok, now how about a tecumseh OH120 with a LMH CARB fuel pump ? Can you do the same without removing the carb, or is it just easier to remove the whole thing, buy a fitting and intake gasket, etc...?
Great video Taryn I would appreciate a video on how to fix the surging on one of those onans I have a p216 onan on a wheel horse 1996 model 416 that just keeps surging any help would be appreciated thanks Ron
Taryl What did you do with the diaphram breather hole? Its shooting fuel out! There is a tiny hole on that plate where that giant circle piece is on my model. DD15A Carb Think im gonna block her up with something or maybe a little tack weld over it xD
not sure what's wrong with mine but after a replacement check valve plate it pumped fine for a few seconds and then stopped, opening it up revealed the rubber flaps under the reeds had somehow blown out or expanded and were hanging up.
Thanks Jerry- I was trying to put my finger on it but just couldn't quite do it. You got it though. I was looking at Elkskins asking myself..."Is that a little Hitler mustache...does he have teeth...is it just the lighting?"
I just cut out the diaphragm, tightened and sealed the gaskets with leather gaskets and gasket maker and plugged the "in" outlet with a bolt and the other end became my pulse pump feed
Elkskins,You are lucky to have friends like these,and they are lucky to have you.
So true Mr. David very well said.
@@robertcrum6169 I'll Third the sentiment.
Some folks R lucky to have a friend that can fix anything at all. They tell me that here all the time it's just what they tell me after I hand em their bill is the catch.
Great cast of characters on this channel. Thanks for the dinner.
Started up the pressure washer yesterday and went WOOOOOOOOOO wife came out and asked what was wrong. Good thing I wasn't doing the Taryl Shuffle!
I just got done posting this same thing,my wife gets so embarrassed.
Is it me, or could Elkskins pass as a Hobbit? I think he’s become a significant RUclips character. I can’t start a single piece of power equipment now without chanting “Fire it up, Fire it up”! Arrrgh.
It's not just you.
after working on a single engine for 3months and it finally started i yelled like him
OUUUUUUUUUUUUUUUUUUUUUUU!!
Every time my wife or daughter starts the cars I yell,Fire It Up,it is usually always followed by,”Would you shut up the neighbors can hear”,lol
@@oxyfee6486 lol
Elkskins I am a huge fan of yours too my friend,I just recently subbed,wish I lived closer.Maybe I’ll make the trip from Woodstock Ontario,Canada,some day,be a pleasure to meet you.
I tried and tried to rebuild the Onan fuel pump using the cheap Chinese rebuild kit. I finally gave up and bypassed the fuel pump just as Taryl demonstrates in this video using the B & S vacuum pump. I had to make a gasket using a thick piece of gasket material because the old gasket was very thin and it leaked gas. I also replaced the gas line from the tank and added new plugs and a condenser. It is unbelievable how well the fuel pump bypass worked...the Sears SS16 Onan starts and runs just great.. Taryl Saved my day!
Pat Sajak has Vanna and now - Taryl has Elk Skins. The resemblance is remarkable.
Nice job guys.
If I see I elkskins in a Bikini I'm gonna ralph all over my key board.
I just did this on a friend's Case 446. Worked out great. Unfortunately, this was AFTER I had installed a cheap kit to replace the original vacuum pump (like you said it worked for a while-ONE hour). Thank you so much. The Briggs pump works so well!
Elkskins is like an operating room nurse handing the surgeon his instruments
Good lord lay off that brand of whiskey please...
That is called a scrub nurse and she is just as important as the doctor is
I say "she" because my old lady is one and she makes one hell of a paycheck 😂
2:51 Elk Skins making sure the steering wheel is in right position for this critical step.
Taryl, you can go to Ebay and get a rebuilt Kit. Smiling!
I’ve also used them on Kohler K series and Command engines to save money over buying the mechanical pumps. They are also great when the fuel tank is lower than the carb and gravity won’t work. Thanks for sharing!
I am about to do this fix on my 1973 Sears SS/16 Twin tomorrow, thank you Taryl! I can't wait to FIRE IT UP FIRE IT UP FIRE IT UP!
Can't stop an Onan. Badass engines.
Nice to see you keeping the onan engine running taryl
Elk Skin's look like Buddy Hackett !!!!!!!!!!!!!!!!!!! LOL !!!!!!!!!!!!!!!!!!!!
Thought about it but you have a small vent in the cover plate won’t thar leak? Or do you use Taryl putty there?
I did your fuel pump bypass. Works well. Although it was not the fuel pump. it was a cheep Chineese condenser. I put a SBC ~Blue Streak on and no more loss of power at high speed. I have a 18/6 BG/MS with a DD11 Carb
It’s always nice to learn something new
Thanks guys.
Elkskins look like a Sergeant Schultz if anyone knows what show that's from lol
"if anyone knows what show that's from" I know nothing!
Nice retrofit, Taryl!
Nice love them old machines !
I frigging love Elkskins!!!
Your Onan it Taryl! Get it..
Yeah, and the water's deep too.
I love the sound of an onan!
What did you plug that pulse line into? Intake manifold vacuum hole?
crankcase port then to p port on fuel pump
Good simple solution to buying that expensive factory pump. Thanks Taryl!
Pulse? Is that hose connected to a vacuum port on the intake that moves a diaphram on the briggs pump?
Was wondering the same thing
Yes. It would have operated the pump built into the carb. I expect that it connected to the block piece that he didn't use.
Thanks for the tip guys 😊
Elk Skins is the Ed McMahon of you tube. He should be laughing more in the background like Ed McMahon did...
That’s funny lol.
More like Larry 'Bud' Melman even looks like him.
I just had a flash back of Jonny wearing his Turbin on his head reading those tarot cards to Ed...
received my order from ya yesterday, coffee cup is premium, z bender is outstanding tool, and the gel lubewhat can I really say about it, excellent without the normal mess with most lubes, just aim and spray. I thank you very much for the stickers you threw in, just haven't decided where to put them yet. keep up the good work so we can keep learning
double k from western pa
Dang that was a nice midweek snack..
Can this be done to the Briggs opposed twins?
I did something similar but I used a electric fuel pump on my case 446 tractor it runs great. No problems. It starts really easy.
We all Luv you Taryl! Great video Brotha!
Great tip! And an excellent assistant! Just needs to practice the wooooooo🤣
7:51 Elk Skins eye roll. Saying to himself "What a hick".
True 👍
Elkskin is my fav now cheer from Canada Bro !!
Woodstock Ontario,loves Elkskins,WOOOOOOOOO.
Nice we need more onan videos
wil that work with the briggs oposed twin engines? I hate those carb mounted vac pumps
What a great day
I did tried this repair and fuel sprays out of the air bleeder hole in the inlet cover! Should I knock out check valves? I’m not sure what to try next?
I have the same issue. How did you resolve???
Same. Trying to seal with moto seal
Cool idea! Elkskins is such a hoot!
Did mine like this 3 or 4 years ago still working
Coool. Great. Ok, now how about a tecumseh OH120 with a LMH CARB fuel pump ? Can you do the same without removing the carb, or is it just easier to remove the whole thing, buy a fitting and intake gasket, etc...?
Watch that circumcision tool...almost got his finger.
Great video Taryn I would appreciate a video on how to fix the surging on one of those onans I have a p216 onan on a wheel horse 1996 model 416 that just keeps surging any help would be appreciated thanks Ron
Is the adjustment the same for the brass float--1/8", or is it different?
Fire it up, fire it up ! Gotta love it lol
Really good video and funny 😆
No fuel line clamps or are you going to add them after??
Is the 18 horse 5400 series any good do they have plastic cam gears in them I'm looking at a craftsman mower at lowes
Elkskins reminds me or Marty Allen. Remember Taryl, shop rags are useful!
Is that Buddy Hacket with Taryl ?
Taryl What did you do with the diaphram breather hole? Its shooting fuel out! There is a tiny hole on that plate where that giant circle piece is on my model. DD15A Carb
Think im gonna block her up with something or maybe a little tack weld over it xD
Great video Taryl, those china carbs are garbage forsure lol good fix!
YOU CAN DO THE SAME WITH THE OLD STYLE BRIGGS 14 AND UP OPPOSED TWINS ALSO HAVE DONE IT A COUPLE TIMES MYSELF. CHEAPER THAN BUYING A NEW CARB.
Thanks, I was going to ask that question. Mine is a '77 L head.
we have the same carburetor and it is spitting fuel , any idea why ? and how to fix it
thank you
Is that a check valve on the fuel line and where can I get one? I have drain back causing my onan to crank way longer than that thing did.
Great video
Thanks buddy for sharing everything with us you guys are awesome
Fire it up fire it up
Elk Skins standing there with both eyes looking out the same hole. Em ole doobies got him walleye’d.
I think fire it up is what you guys do off camera ?
That was a damn good Sears mower. I believe Roper had one as well. Not sure who actually made it.
Thank you!!
I like to use mikuni fuel pumps. They can be rebuilt and the kits are readily available.
those plastic fuel pumps are made by mikuni. kohlers use them too
What, no hose clamps? Where did the pulse hose go to the engine? Great video, thanks for that.
Any crank case pressure above the oil line.
what was the pulse line hooked too?
We call those loppers the Bobbits. 😳
Nice job 👍
recall the HIGHWATER pants Elkskins was sporting in some older video. Straight out of Beverly Hillbillies
No hose clamps?
Next video: how to rebuild a fire damaged Onan engine.
Put them gaskets on any other way they leak Thanks Taryl
not sure what's wrong with mine but after a replacement check valve plate it pumped fine for a few seconds and then stopped, opening it up revealed the rubber flaps under the reeds had somehow blown out or expanded and were hanging up.
where does the PULSE hose originate? I thought crankcase had negative pressure.
Elkskins👍
You should have mounted the fuel pump to the mufkin , whattttt !!!!!!!! lol
Yeah then it would be a fire breathing mower!!!
Or to the side of the battery!
@@kevinpenn3424 yep lmao
Your pokes fitting on your engine magically showed up huh
I wish I had this engine in my sears so stead of the Tecumseh 16hp OHV.
Contact me
I have 3 and we can work out a swap. Texas
Good stuff crazy man....
Is that Buddy Hacket
Hey Taryl 👋
Should also get a new Model Replacement Brass Float for her.
As the old Ones ALWAYS fail. well on 95% of the onan bf ms engines i have worked on.
Elk Skins is funny AF !
Elkskins! 🤘
Taryl. you are the best!! Can't stand a dirty Car-bit-trator
Elskins looks like Oliver Hardy lol
Thanks Jerry- I was trying to put my finger on it but just couldn't quite do it. You got it though.
I was looking at Elkskins asking myself..."Is that a little Hitler mustache...does he have teeth...is it just the lighting?"
Hose cutting tool: Something you see in a Mafia flick where they try and get information out of a tied up rival family member.
Watch them fingers......whoooooooo !!!
Tried this only problem is on my plate where the spring would sit is a tiny pin hole that squirt's as it pumps
I'm having the same issue ... How did you resolve???
@@jmk1086 get a tube of seal all just a small dab will do
@@robwood8201 thanks for the response!!
Hey I did this conversion and the pump is flooding the carburetor
Elk skins
You should use a better fuel filter since its got a fuel pump, that style is for gravity feed.
White is for pump. Gravity one is red.
Does Onan make their own engines?
Yea. Back in the day of course. But they were bought out by Cummins!! And yes Cummins as in diesel.
Hose clamps?
Will Ronnie be selling the scrap fuel line?
I just cut out the diaphragm, tightened and sealed the gaskets with leather gaskets and gasket maker and plugged the "in" outlet with a bolt and the other end became my pulse pump feed
Tighten it up then,fire it up ,fire it up ,fire it up 👀😁🖖🖖✌✌✌
Go with Gravity feed.
Wear one of those old construction hats with gas cans over your ears. That will enhance your wacky persona.
Really like them onan motors, but every one I get is always wore out.
Foreskins will be snipped by Elkskins.
Kind of a weak hoot there, Elkskins. Let's see if you can fix that - LOL