You have done the lords work sir. The other videos were terrible, gave up years ago trying to learn this machine and now suddenly I can sew thanks to you
Thank you so much for this video! My sewing machine has been sitting for years because I was intimidated by it. Now, thanks to your video, I think I can finally use it!
This has been very helpful. I've had this sewing machine since I was a teenager and used to know how to use it, but it's been a long time so this was the perfect refresher. Thank you!
Thank you so much for making this video! It was the perfect refresher course to get me stitching again. You are so lucky to have found your machine that cheap!
I’ve had this machine for over 10 years. I’ve had mixed results due to my inability to understand the manual. I cannot thank you enough for sharing how it works. I will try it again. It was about to be donated! Excellent video!
Thank you for your Excellent, Very clear instructions on how to operate this machine !! I think we should hear more about your model ships. You should be the teacher for all the sewing machines !
Glad you asked: Building Emma ruclips.net/video/6bhjtyhku5Q/видео.html Footy Brando ruclips.net/video/tvA_ueamQ9I/видео.html Province Ship Scrappy ruclips.net/video/nvZVsLbpu7A/видео.html Wild Duck - Daisy ruclips.net/video/TFQytRHHVAU/видео.html RC Laser Unboxing, Modifications, & Setup ruclips.net/video/k0UTujuq2_g/видео.html RC Sailboat Nirvana II ruclips.net/video/TxEYK38utlw/видео.html
....and why would I need a sewing machine? To make myself a Ninja Suit, of course!!! 😂 Thank you for this video.....and THANK YOU for your military service too!
The power switch on the right also turns on the light. If your machine powers up but the light does not come on then the bulb is bad or you have a wiring problem. Sorry for the late reply.
Perhaps it is not threaded through the path correctly. Perhaps the dension is too tight. Put all settings to 3 and try that. If you google there are places that can checkout your machine and correct it.
Good morning, can you tell me how to do the zic zac stitch, what numbers should the wheels go on, thank you? Put all 4 dials to number 3. That is a good start then turn the big outside dial in the front to change the length of the stitch, then turn the right-hand dial on the top to set the width of the stitch. Pon los 4 diales en el número 3. Ese es un buen comienzo, luego gire el gran dial exterior en la parte delantera para cambiar la longitud de la puntada, luego gire el dial de la derecha en la parte superior para establecer el ancho de la puntada. Thanks for watching. Gracias por mirar.
Hi, I've got the bobbin threaded and in place, and the needle threaded as well, but when I try to do what you do at 9:04, the bobbin thread doesn't get caught - any tips for that situation?
If the needle is threaded front to back and the bobbin is threaded properly and if the thread in both the needle and the bobbin is the same thickness, then it should work. But I have on occasion had to try two or three times for the needle to pick up the bobbin thread. On occasion I have reloaded the bobbin several times before it managed to properly grab the thread.
Quick answer: Set every dial to #3. Then adjust width dial on top and outer dial on front for your length and width. Respuesta rápida: Establezca cada dial en #3. Luego ajuste el dial de ancho en la parte superior y el dial exterior en la parte delantera para su longitud y ancho.
You have done the lords work sir. The other videos were terrible, gave up years ago trying to learn this machine and now suddenly I can sew thanks to you
En español
Estamos en Colombia
Thank you so much for this video! My sewing machine has been sitting for years because I was intimidated by it. Now, thanks to your video, I think I can finally use it!
This has been very helpful. I've had this sewing machine since I was a teenager and used to know how to use it, but it's been a long time so this was the perfect refresher. Thank you!
You are so welcome!
Impressive, you have taught me things about my machine and I've been using it for years. I'm disappointed it was so short though!
Thank you.
Your video has helped me a lot . Thank you and happy sail making 😊
Thank you sir !! I had just bought this machine and your video genuinely helped soo much with learning how to operate it!! I really appreciate it
Thank you so much for making this video! It was the perfect refresher course to get me stitching again. You are so lucky to have found your machine that cheap!
Yes I was lucky. Thanks for watching.
I’ve had this machine for over 10 years. I’ve had mixed results due to my inability to understand the manual. I cannot thank you enough for sharing how it works. I will try it again. It was about to be donated! Excellent video!
Glad I could help
Thank you for your Excellent, Very clear instructions on how to operate this machine !! I think we should hear more about your model ships. You should be the
teacher for all the sewing machines !
Glad you asked:
Building Emma
ruclips.net/video/6bhjtyhku5Q/видео.html
Footy Brando
ruclips.net/video/tvA_ueamQ9I/видео.html
Province Ship Scrappy
ruclips.net/video/nvZVsLbpu7A/видео.html
Wild Duck - Daisy
ruclips.net/video/TFQytRHHVAU/видео.html
RC Laser Unboxing, Modifications, & Setup
ruclips.net/video/k0UTujuq2_g/видео.html
RC Sailboat Nirvana II
ruclips.net/video/TxEYK38utlw/видео.html
After I watched your video. now I know how to operate my brother sewing machine. Thank for sharing
Excellent tutorial, thank you very much ❤
Thanks! The paper direction booklet was not totally informative; you answered my questions!
Glad it was helpful. Thanks for watching.
I just bought this machine used. This video is so helpful! Thank you!
....and why would I need a sewing machine? To make myself a Ninja Suit, of course!!! 😂
Thank you for this video.....and THANK YOU for your military service too!
I like this video. Thanks a lot
thank god you made this
Thanks for your patience blessed me l couldn't remember the stitches settings after 4 years.
Thank you
I have this same machine , I got it from my late mother , it’s a cherished machine for me
That makes it very special. Thanks for watching!
@@MrKayFisher your welcome ! You do beautiful work !
I have this machine for a long time. but now it's not eating anymore, do you have a way to fix it?
Nice vid how to put on light tho
The power switch on the right also turns on the light. If your machine powers up but the light does not come on then the bulb is bad or you have a wiring problem. Sorry for the late reply.
@@MrKayFisher np you have no idea how much this vid has helped me. Anytime I want to sew I always come back to this vid
Thank you for sharing. Very informative.
nos mequieres coser que debos aser
Thank you so much very helpful
I'm like really late but, why does my thread keep breaking? Everytime I start to sew it doesn't stitch it just breaks
Perhaps it is not threaded through the path correctly. Perhaps the dension is too tight. Put all settings to 3 and try that. If you google there are places that can checkout your machine and correct it.
Buen día me puede decir como hacer la puntada de zic zac ,en que números deben de ir las ruedas, gracias
Good morning, can you tell me how to do the zic zac stitch, what numbers should the wheels go on, thank you?
Put all 4 dials to number 3. That is a good start then turn the big outside dial in the front to change the length of the stitch, then turn the right-hand dial on the top to set the width of the stitch.
Pon los 4 diales en el número 3. Ese es un buen comienzo, luego gire el gran dial exterior en la parte delantera para cambiar la longitud de la puntada, luego gire el dial de la derecha en la parte superior para establecer el ancho de la puntada.
Thanks for watching.
Gracias por mirar.
@@MrKayFisher gracias
When you try to sew needle sounds like it's hitting something and thread breakd
If it always does this, take it to a friend who is an experienced sewer and see if they know what is going wrong.
Please tell me , I want more length of stitch no 2., how can I do?
Turn the outer (Grey) knob clockwise to about number 4. That is a 4mm length stitch.
@@MrKayFisher thanks a lot
THANK YOU!!!!
Thank you for watching
Hi, I've got the bobbin threaded and in place, and the needle threaded as well, but when I try to do what you do at 9:04, the bobbin thread doesn't get caught - any tips for that situation?
If the needle is threaded front to back and the bobbin is threaded properly and if the thread in both the needle and the bobbin is the same thickness, then it should work. But I have on occasion had to try two or three times for the needle to pick up the bobbin thread. On occasion I have reloaded the bobbin several times before it managed to properly grab the thread.
Hay no, traduzcanlo al español porfavor, yo tengo esta máquina, pero me hago bolas con las puntadas, gracias.
Traduzca lo al español porfavor.
❤
Traducir en español, x favor.
Sw puede coser sin pedal
No. Sorry
Spanich
Quick answer: Set every dial to #3. Then adjust width dial on top and outer dial on front for your length and width.
Respuesta rápida: Establezca cada dial en #3. Luego ajuste el dial de ancho en la parte superior y el dial exterior en la parte delantera para su longitud y ancho.
Tradução