Kubota L-Series Tractor Grease Points [HOW TO]
HTML-код
- Опубликовано: 29 мар 2021
- Today’s video will be a walk through/demonstration of all of the grease points on the Kubota L3901, Kubota L3301, and Kubota L2501. I made this video to help owners identify where the grease points are and some quick tips to get a grease service done.
If you like this video please check out my other videos and comment, like, and subscribe!!
If you want to see something with this tractor or implements please leave a comment and I will see what I can do!
Thanks for watching!! Развлечения
FYI check out the notes in the manual for the front axel grease fitting. All Kubotas i have worked with have a breather port bolt to remove first, then grease that zerk until grease flows out of the breather port.
You missed the two on the quick attach. Also, the loader calls for grease every 10 hours. Thanks for the video!
Thank you!
Really appreciate the camera further away on the 2nd side of the loader. Great job.
Love the yellow Wranger and your Jeep tat!! I had a Yellow 2001 Wrangler for 14 years till the frame started rusting out. Thanks for the video - my L2501 at around 35 hrs - so wanted to make sure I had all the locations known for the tractor part - been doing the loader every 8-10 hours.
Thank you! Go follow my Jeep channel, @YelloJeepin! I post a lot of Jeep stuff on there.
Just what I was looking for. Thanks
Great video! Thanks
Thanks!
No problem thanks for watching!
thanks for sharing. very helpful!
Glad it helped! Thanks!
Good information. Thank you
No problem, thank you for watching!
Great video. Greased my L3130 today and I’m sure I missed the pedal ones underneath. But dude. It’s a tractor, lil grease over run not gonna hurt it 🤪 thanks for the help.
I know what you mean! I would have missed them too if I didn’t read the manual lol
@@CarolinaEarthWerx I actually got up under it today and didn’t have those on my tractor but in total I found 8 more that I didn’t see because of the video so thx again.
No problem!
Great video. Thank you
Stupid question- what’s up with the grease pouring out the connection point? I thought that meant the zerk is clogged
Thanks! Crappy grease gun
Thanks
No problem
I greased Mine today and missed the axle & pedal linkage fittings
Thanks for the demonstration
No problem! I’m missing a few in this video
Cotty, I'm 80 so be patient.
How to I get that plastic tube covering the PTO shaft so I can grease the PTO & the u joints.
Thanks
The first one you did on your loader is almost impossible to do in mine. The fitting is positioned so I can’t get the end connected to it.
You can move it so it’s positioned correctly. I believe I had to do that on mine
Label on FEL says EVERY 10 Hours for the FEL
That’s is correct, left out of the video.
@@CarolinaEarthWerx I did see some grease points I have been missing that You pointed out....TY
Thank you, glad you enjoyed it!
What motor oil do you use
15w-40 rotella
Don’t use whatever grease you would like.
The manual says to use a high-quality grease designating extreme pressure and containing Molybdenum disulfide. This grease may specify Molly EP on its label.
Kubota high performance Molly lithium all purpose, heavy duty grease is a good choice.
AP and EP differences are denominator at best. But you are correct. And just remember, any grease is better than no grease! 🤣🤣
Every 10 hours on mine
Good!