critical error: the hinge points of the steering forks don't match the universal hinges on the axles. the build is great in concept but this error puts too much stress on very weak partss, and can break them easily.
the hinges on the carden joint and on the steering knuckle and A-arms are out of line, the cardan joints are not synchronised and for the wheel hub you can replace the black +o+ piece with a 3 pin wheel hub 9 which if used with the CV axles from lego will correct the unaligned cardan joint.
if the track rod gets too much pressure, it will break off along with some other pieces damaging the turning. anyways, another creative build in the world of bricks!
The cardan joints are further than their max angle limit, its 10° for a ujoint, if you go further you create unnecessary friction and resistance and the ujoint will get damaged and eventually break, please limit the max distance the suspension can lower to
i was looking for a buggy model with at least 40mm of Ride height / ground clearance 4WD and could not find it at all . can you make a video about building one with steering , suspension, shock absorbers, everithing on it?
critical error: the hinge points of the steering forks don't match the universal hinges on the axles.
the build is great in concept but this error puts too much stress on very weak partss, and can break them easily.
Yes you're right! I'll make some change and adjustment later. Thank you for watching and to your comment👍👍
agreed
There...
There are two universal joints...
There's room for them to move out size to side, he literally shows this at the end.
@@technicbrick14 you don't really _need_ to tho, do you?
@@technicbrick14 the suspension is very soft and can damage the car when driving,
the hinges on the carden joint and on the steering knuckle and A-arms are out of line, the cardan joints are not synchronised and for the wheel hub you can replace the black +o+ piece with a 3 pin wheel hub 9 which if used with the CV axles from lego will correct the unaligned cardan joint.
Thanks for listing part numbers! It really adds a lot to the informativeness of the tutorial.
if the track rod gets too much pressure, it will break off along with some other pieces damaging the turning.
anyways, another creative build in the world of bricks!
i love that you put all the numbers to the parts
The cardan joints are further than their max angle limit, its 10° for a ujoint, if you go further you create unnecessary friction and resistance and the ujoint will get damaged and eventually break, please limit the max distance the suspension can lower to
I like it
Wow, nice tutorial
Thank you:)))
Mmh, probably not the best suspension in the forest, Where are the Springs? 😂
Nice tutorial btw, i'll subscribe
Springless suspension xD Thank you for watching!
This building is hurting my eyes
Amazing It is so good technic skill!
Thank you! for watching 👍👍
👍👍👍
Amazing tutorial, will definitely use this although your universal joints aren't phased and the working angle is to high.
Remember me when your famous :)
Haha, sure😄 long way to go
i was looking for a buggy model with at least 40mm of Ride height / ground clearance 4WD and could not find it at all .
can you make a video about building one with steering , suspension, shock absorbers, everithing on it?
some of the parts are cada bricks
👌 thx
Ist wery wery Big.
Any instructions on this please?
What do you do if you dont have the ball connecter
Can I get is on this site how to order it please
What part are those train wheels? I have never seen them in gray?!
What train wheels
@@kelvinminhkhang5146 2:42 both at left and right axis.
They are cada or some other brand definitely not lego
First