Have retested the ecoflow after firmware and BMS reset. Didn't use the cooler ,but over a few days used it doing various things drained it down to 8% . Charged it from 8% too 100% in about 2 hours using 2 100 watt harbor freight solar panels in parallel in a little over 2 hours. If anything changes I'll update.
Yeah... me too. The problem with it dropping out at 24% was a bit disappointing, but I have updated the firmware and did the BMS reset procedure. Still have yet to retest it. I'll drop an update video after I use it again. Thanks for watching 👀!!
Do you know the power needed to run the Domende? The RIVER 2 Max has an output of 12.6 volt at 10 amp. Many fridges need 13.5 Volt so the RIVER is not ideal for most fridges.
According to the nomenclature tag on the unit, it's 12/24vdc input . Draw at 12vdc is 6amp. Draw at 24vdc is 3amp. The fridge preformed just fine. The river2 max seems to be working correctly after a firmware update and a reset of the bms. Thanks for Watching!
@@intoeverything2023 Yeah I kinda realized that after I posted the comment. Still valid and cheap enough. I've used it many times thawing my AC or mini fridge.
![RYOBI 18V Hybrid Cooler Fridge Freezer [12V 18V 120V]](http://i.ytimg.com/vi/hBs2_CMvKgY/mqdefault.jpg)
Have retested the ecoflow after firmware and BMS reset. Didn't use the cooler ,but over a few days used it doing various things drained it down to 8% . Charged it from 8% too 100% in about 2 hours using 2 100 watt harbor freight solar panels in parallel in a little over 2 hours. If anything changes I'll update.
I'm impressed with the Ecoflow
Yeah... me too. The problem with it dropping out at 24% was a bit disappointing, but I have updated the firmware and did the BMS reset procedure. Still have yet to retest it. I'll drop an update video after I use it again. Thanks for watching 👀!!
Haven't retested the EcoFlow yet. Next time I use it ,I'll drop an update and let ya'll know if the firmware update plus BMS reset procedure worked.
Do you know the power needed to run the Domende? The RIVER 2 Max has an output of 12.6 volt at 10 amp. Many fridges need 13.5 Volt so the RIVER is not ideal for most fridges.
According to the nomenclature tag on the unit, it's 12/24vdc input . Draw at 12vdc is 6amp. Draw at 24vdc is 3amp. The fridge preformed just fine. The river2 max seems to be working correctly after a firmware update and a reset of the bms. Thanks for Watching!
Use a hairdryer to melt the ice fast.
I personally don't have a hair dryer 🤣😂! That is a good tip though! Thanks for watching 👀!!
@@intoeverything2023 Yeah I kinda realized that after I posted the comment. Still valid and cheap enough. I've used it many times thawing my AC or mini fridge.
3 for 1 homie
3 for 1 ain't nothin to me mannnn!!!