Brake Fluid Tester- Why You Need One!
HTML-код
- Опубликовано: 6 сен 2024
- Kingbolen Brake Fluid Tester
www.amazon.com...
Amazon Affiliate link below
www.amazon.com...
www.milwaukeeto...
#flatratemaster
Instagram
/ flatratemaster
flatratemaster@gmail.com
As a tech up in the north it’s like hitting the lottery if bleeders actually open 🤣
I love how Honda set their maintenance reminders...it tell you when to do each maintenance and when whether something like oil change brake fluid or service brakes or some other things...I do same thing like you mileage and condition
Agreed
Northern European tech here, i do 3-4 brake fluid changes a week. Its a good profit for a 15-20 min job, we charge 100$ for a brake fluid change. I use a German BGS technic brake fluid changer, its a nice unit as it uses an eletric motor to pump fluid and put the resorvoir under pressure, it also collects the used brake fluid with 4 silicone hoses to each bleeder screw. Bought the machine 15 years ago for 2000$ and it paid for itself after 2 months. VIM brake bleeder wrenches is also a must.
Do you pen all bleeder at the same time , ?
@@inverseuniverse5727 No the machine flushes 100ml brake fluid on each caliper starting from rr->lr->rf->lf then it pulses rr for 50ml again to make sure all brake fluid is replaced.
And in the end it does a system leak test for 2 min to make sure all bleeder screws are tight and that the rest of the system is not leaking.
Lol, declined brakes, how is the customer plan to stop the car, Fred flintstone style?
They got a uncle that will do it with rock auto parts and 50$ labor but brake jobs are ultra expensive at a real shop
I've stopped testing brake fluid some time ago. I've used both the test strips and an electronic tester. The problems were more with service writers and/or shop owners, than with customers. At most, they just have me drain and fill the brake fluid reservoir🙄
I'm over 40 years German car mechanic, they recommend every two years, I power flush 3 liters through the system. Great money maker, can usually do other things on the car while the fluid goes through. Run the right rear the longest than the left rear right front and left front makes a big difference. I'm getting 160-180 per car.
Four cars in one shop that are low on brake fluid? The odds are astronomical...
Anyway, this is not my idea. It's also a go-no go test.
Copper in the brake lines are mostly what cause the discoloration seen in old brake fluid. By the time you see this discoloration, it's likely that moisture has found its way in too.
DVOM set to DC Volts, negative meter lead to (-) battery terminal (if you can't reach the battery, a solid ground works too), positive meter lead in the brake fluid (don't use the actual lead, sacrifice a piece of copper tubing).
If the reading is ≥ .3v, the fluid should be changed. However, It's easier to convince customers of this than it will be to convince your Foreman/shop owner.
They'll be really skeptical...
Same method can be used for coolant.
@@jimb8842 Thanks, Jim. Good to know. Same .3V and all?
@@nathandnicholson Yes, + lead directly in coolant.. I first learned and have always used .3v but I googled and saw .2 or .4. Interesting as .3 would be the average of those 2.
@@jimb8842 I'll be using that for coolant from now on!
We use Flow Dynamics machine with BG fluid
And we use Test Strips BG provides
BRAKE FLUID IS ONE OF THE BEST PENATRATING OIL ALSO 🙂
I changed all 4 of my sister's brakes, but I couldn't find my lil Gatorade bottle I had set up for one person brake flushing. I was feeling a bit lazy after changing all 4 brakes, it was getting getting late so I just told to go to the local shop and ask for a brake flush when she had the chance. She went her next day off. They charged her an hour labor and a bottle of fluid. All good 👍
You can tell domestic cars don’t call for it given the number of caliper replacements needed
Lol all ive done is check the oil, if its dirty then flush/ change lol had no idea about these tools but I don’t do vehicle services
I don’t need a tool personally, I just flush it when time or mileage calls for it. Brake fluid can still be ok after 60k miles and 5 years. Its not as critical as they say. 30k mile intervals are best but…
I avoid opened up brake systems unless required. If pedal is soft, or I am opening for component replacement.... sure. But that's a can of worms I don't want to open.
Are you also referring to just opening up the cap of the brake fluid reservoir? Could that negatively affect the brake system?
@@TheHunterHofman Probably brake bleeders braking off, needs to be a real unmaintained pos for that to happen
OEM recommend brake systems flush, test calls for brake systems flush, flat rate master said it's important to flush brake fluid. Also flat rate master truck got some rust on it and needs a brake system flush, if I'm not going to make my full NUT $$$$ and it means I'll have to actually work I'm not gonna recommend the brake fluid service. Sounds about right 🤬
can I use a multimeter? I keep hearing that is another way to test
So I bought this tester from the Amazon link. Figured I would test it. Put it in straight brake fluid and it showed about 2 bars. Started to add water at 1/2% at a time. After first 1/2 % it shot up to 6 bars, like yours in the video. Kept adding water till I got to 50% water and it still showed 6 bars, Okay, less than 2%. Sent it back to Amazon. Wondering if these are all this inaccurate, or I just got a bad one?
Anyone want to test their tester for accuracy?
That tool sold a lot of brake fluid flushes worth it
Customer declines video 😂
Low means flush it
Test strips from Phoenix brake bleeder company? Tests copper ppm.
Seems like every other car I pull in has brake fluid that looks like coffee, pretty easy sell when you show them what new brake fluid looks like vs the stuff in their car.
What ??? My papa 48 f1 ford still has the same one that Henry put in it !!! Yes I said 48 😮
boggles my mind when customers decline a brake flush i guess they rather pay for 1000$ abs module down the road.
How do you get a BG flush machine? I can’t seem to find out how.
Same tool for coolant testing ??
Made in USA stickers are made in China
😇
I just have an ordained priest come by and bless the brake fluid,then I hunt down a mythical monster from medieval Western Europe, next I douse the monster in the brake fluid and see if it does any damage. If it does I inform the customer that it’s time to change the fluid. They deny the service and I don’t get paid for for my efforts. Sometimes I feel frustrated with my wasted endeavors but I still sleep well at night knowing I didn’t buy that stupid tool.
Quick easy money maker but yet customer declined brake job 😂😂😂😂
Or you can only work on vehicles with air brakes and have one less thing to have to worry about
FIRST!!