Firstly Tim, thanks for making a no filler/waffle video. I'm looking to change the rear pads and maybe disc on my Mums car; an Audi A3 2ltr diesel 3door 2013. Do you have any recommendations regarding pads and disc suppliers? Also it would be great if you added the actual parts used in the video description. Again thanks for the insight, just need that extra detail as it my first time lol. Peace
Bless you bro. I have a 2016 A3 and this video is perfect. Quick question, I’m mechanically inclined but don’t know shit about the electronics. My system says my parking brake is engaged and beeps even when it’s disengaged. So like what do I do about that? Do I need that software you showed earlier in the video to do a system reset or something?
Thanks for the advice that the EPB module is under 03 ABS as 53 Parking Brake is not found on the A3 I was working on. Maxisys also couldn't find it as I guess it was looking for 53 Parking Brake also Tip in exchange, use a short 7mm Hex bit in a ratchet spanner ( wrench) to remove and fasten the pins. I also have a 7mm 1/4 drive bit on a long ratchet. Always clean and lub the pins to avoid locking up. You can lever the pads to force the piston back part way before any disassembly, this allows the calipers to easily come off, even if the disk ( rotor) is seriously worn or rusted
Just did the rear rotors and pads on my 2014 G-Tron last weekend! Should have watched your video beforehand! Do you get some slight rubbing and heating of the rotors with brand new brake pads? I do and I guess it's due to the bedding in process and will go away. Will it?
Ever though about painting your hubs and calipers? I did mine last year in smooth hammerite sliver with a foam sponge brush, looks great to be honest no rust has come through as of yet (wire brushed them first before painting) could be another video for you?
A sponge? I hadn’t even thought of that. Does it look alright yeah? I did my fronts with ham silver but used a brush. I’m not a massive fan of the finish but it’s miles better than rust.
I love your vids but you give details of all the stuffs you use in making the vid but no details or links about the actual things used in in completing the task. Please do give details and links thanks
Thanks a lot for the video, it worked like a charm, I don't have any tool to push the piston back into the caliper but remove the break fluid reservoir cap helped !
Hi, got a 2017 2.0tdi Quattro needing rear brake pad change. Do I need to use the VCDS comp programme? Was all set to change this w/e but this vid has stopped me in my tracks.
Hi mate, if its anything with an Electronic parking brake then they need to be in service mode as if you wind or push the piston back in without them being in service mode, you may destroy the thread on the pin the winds back in... some have done it without VCDS, but I play it safe...if you don't fancy the £200 vcds purchase, there are some cheaper eBay OBD tools that could do the job for ya....
Thanks for reply m8. Booked car into garage now. Is the front pads a straight swap (with exception of wear sensor connection)? Or does the A3 require vcds for these also?
Google, how to run windows on a MacBook....thats what I did and I can use xp on my MacBook if I wanted to... Please like and subscribe! Hit the notification button so you don’t miss out on the new videos! TW
bjr g vue ta vidéo je doit faire les plaquettes et les disques arrière peut tu me dire se qu'il faut comme connection a la voiture pour le système de frein de parking je suis un peut nouveau dans tout se qui et ordinateur g télécharger le logiciel sur mon pc merci pour ta vidéo mais g une question si on laisse le moteur tourner le système de frein de parking seras débrancher non donc on peut faire les plaquettes et les disque c juste que le mateur tourne non
If you need the tool to push the rear piston back in because it has to be turned and pushed at the same time, how come it does not need to turn when pushing out?
You don't need the tool as it doesn't need to be twisted, but you need to push piston back in and the clamp I had wasn't big enough to squeeze it back. The tool I think is more to do with ensuring you don't break any of the cogs inside the piston and to let the car brake differently as the pads are thicker I believe...
You can also use your phone or tablet via ODBEleven or Carista… but yes anything with a rear electric parking brake requires it. Otherwise you have to disassemble the electric motor and spin manually and risk more damage.
@@darylbrewster8885 I got an obdeleven from eBay for around 40 quid. Just as good as a vcds but cheaper and easy to use. I've used it to clear oil and service warnings as well as break release. You can see a few tutorials on youtube.
No mate, you need the parking brake electronically released Please like and subscribe! Hit the notification button so you don’t miss out on the new videos!! TW
You can do it with out the vcds I figured it out luckily very tricky Though with out it ... u need a brake pad spreading tool on in the caliper with one brake pad ... once you push the piston back in the break far as u can leave it there and go In the car and turn the key in the on position but not all way on with the car Running ... then put parking break on for 5 secs then take it off ... got back to the caliper and tighten the brake pad tool it should be loose and be able to tighten couple of turns after its tight again ... put parking break on for a 5 secs then turn it off again and then tighten tool Again ...do this about 10 times or more maybe and the piston should be pushed all the way in with out no vcds scanner tool mess with the computer on the car
Firstly Tim, thanks for making a no filler/waffle video. I'm looking to change the rear pads and maybe disc on my Mums car; an Audi A3 2ltr diesel 3door 2013. Do you have any recommendations regarding pads and disc suppliers? Also it would be great if you added the actual parts used in the video description. Again thanks for the insight, just need that extra detail as it my first time lol. Peace
Here from New York , I have different Audi but same setup your video saved me $550 trip to the dealer
Glad to have helped Jose! Greetings from UK!
Please like and subscribe! Hit the notification button so you don’t miss out on the new videos!
TW
Bless you bro. I have a 2016 A3 and this video is perfect. Quick question, I’m mechanically inclined but don’t know shit about the electronics. My system says my parking brake is engaged and beeps even when it’s disengaged. So like what do I do about that? Do I need that software you showed earlier in the video to do a system reset or something?
Thanks for the advice that the EPB module is under 03 ABS as 53 Parking Brake is not found on the A3 I was working on. Maxisys also couldn't find it as I guess it was looking for 53 Parking Brake also
Tip in exchange, use a short 7mm Hex bit in a ratchet spanner ( wrench) to remove and fasten the pins. I also have a 7mm 1/4 drive bit on a long ratchet.
Always clean and lub the pins to avoid locking up.
You can lever the pads to force the piston back part way before any disassembly, this allows the calipers to easily come off, even if the disk ( rotor) is seriously worn or rusted
Just did the rear rotors and pads on my 2014 G-Tron last weekend! Should have watched your video beforehand! Do you get some slight rubbing and heating of the rotors with brand new brake pads? I do and I guess it's due to the bedding in process and will go away. Will it?
should do...not too sure mate..
Welp, a week's driving did it for me, so no problems anymore. Just the first 300-400 km that the pads rubbed, now it's a lot better.
Hi, thanks for the vid. how do you go about bleeding this car?
Ever though about painting your hubs and calipers? I did mine last year in smooth hammerite sliver with a foam sponge brush, looks great to be honest no rust has come through as of yet (wire brushed them first before painting) could be another video for you?
A sponge? I hadn’t even thought of that. Does it look alright yeah? I did my fronts with ham silver but used a brush. I’m not a massive fan of the finish but it’s miles better than rust.
No Waffle - Great vid.
Do i need VCDS for a brakepad change? I have 2013 A3 8V 1.8 CJSA With electronic parking brake
I love your vids but you give details of all the stuffs you use in making the vid but no details or links about the actual things used in in completing the task. Please do give details and links thanks
Thanks bro,
I appreciate what you're saying, those parts used differ from car to car so I don't really label them..
Thanks a lot for the video, it worked like a charm, I don't have any tool to push the piston back into the caliper but remove the break fluid reservoir cap helped !
Glad it helped!
Hi, got a 2017 2.0tdi Quattro needing rear brake pad change. Do I need to use the VCDS comp programme? Was all set to change this w/e but this vid has stopped me in my tracks.
Hi mate,
if its anything with an Electronic parking brake then they need to be in service mode as if you wind or push the piston back in without them being in service mode, you may destroy the thread on the pin the winds back in...
some have done it without VCDS, but I play it safe...if you don't fancy the £200 vcds purchase, there are some cheaper eBay OBD tools that could do the job for ya....
Thanks for reply m8. Booked car into garage now. Is the front pads a straight swap (with exception of wear sensor connection)? Or does the A3 require vcds for these also?
No problem, front pads straight swap yes, no vcds at all, just reply sensor and you’re good to go!
Please like and subscribe! Hit the notification button so you don’t miss out on the new videos!
God bless
TW
Tim Williams without VCDS. Cut the battery. Gg. Saved $200.
How are you using the software on macbook? i got the same laptop and canot seem to download it.
Google, how to run windows on a MacBook....thats what I did and I can use xp on my MacBook if I wanted to...
Please like and subscribe! Hit the notification button so you don’t miss out on the new videos!
TW
@@TimWilliamsHD what cable did you use for the vcds, and how much was it
bjr g vue ta vidéo je doit faire les plaquettes et les disques arrière peut tu me dire se qu'il faut comme connection a la voiture pour le système de frein de parking je suis un peut nouveau dans tout se qui et ordinateur g télécharger le logiciel sur mon pc merci pour ta vidéo mais g une question si on laisse le moteur tourner le système de frein de parking seras débrancher non donc on peut faire les plaquettes et les disque c juste que le mateur tourne non
If you need the tool to push the rear piston back in because it has to be turned and pushed at the same time, how come it does not need to turn when pushing out?
You don't need the tool as it doesn't need to be twisted, but you need to push piston back in and the clamp I had wasn't big enough to squeeze it back. The tool I think is more to do with ensuring you don't break any of the cogs inside the piston and to let the car brake differently as the pads are thicker I believe...
thanks for the quick reply!
can this only be done using the software?
Thancssss
Is it really necessary to use computer to change the pads?
You can also use your phone or tablet via ODBEleven or Carista… but yes anything with a rear electric parking brake requires it.
Otherwise you have to disassemble the electric motor and spin manually and risk more damage.
I have a 2016 Audi A3 8V Quattro and I can’t find rear brake kits for my car. Any help suggestions from anyone would be greatly appreciated!
Awsum. Was waiting for you to make this video. Keep up the good work...
No worries Shanx, Glad to help!
TW
Would this be the same on a 2013 Audi A4 with electronic parking brake ? Thanks
Yes mate..should be!
Thanks for watching Jamie!
Please like and subscribe
Thanks Tim amazei g vid I did think about Allen key and then saw you used it will tackle it tomorrow thanks m8
What cable u using for VCDS .
Can’t remember matey, sold car nearly 2 years ago, VAG CAN or something?
Where did you get the vcds?
Bought from a ross tech dealer in ilford, London..
Is it possible to do it without vcds? I got an mot coming up in a few days and would rather do the work myself than take it to a garage.
@@darylbrewster8885 I got an obdeleven from eBay for around 40 quid. Just as good as a vcds but cheaper and easy to use.
I've used it to clear oil and service warnings as well as break release.
You can see a few tutorials on youtube.
Thanks man!
No problem!
Please like and sub!
Is Vcds necessary
Afaik mate
If I do not reset the computer with VCDS, will anything happen? ABS light, etc? Thank You.
Question m8, is it possible to change rear pads without the VCDS ?
No mate, you need the parking brake electronically released
Please like and subscribe!
Hit the notification button so you don’t miss out on the new videos!!
TW
Great vid
Or leave the engine running . To stop handbrake coming in , worth cleaning round the sealing before pushing back
You can do it with out the vcds I figured it out luckily very tricky Though with out it ... u need a brake pad spreading tool on in the caliper with one brake pad ... once you push the piston back in the break far as u can leave it there and go In the car and turn the key in the on position but not all way on with the car Running ... then put parking break on for 5 secs then take it off ... got back to the caliper and tighten the brake pad tool it should be loose and be able to tighten couple of turns after its tight again ... put parking break on for a 5 secs then turn it off again and then tighten tool Again ...do this about 10 times or more maybe and the piston should be pushed all the way in with out no vcds scanner tool mess with the computer on the car
Anyone know how I can do this without vcds
Cracking video 👍🏻
Cheers Ian
TW
You have to have the car on 12v while carry out this
It’s not about battery it has to stay 12v or can damage the system
What's your source on this?
8P