1/43 AWD DRIFT - NOW ITS EPIC!!!! Gyro added and rear suspension mod.

Поделиться
HTML-код
  • Опубликовано: 5 сен 2024
  • Hey folks. I added a Dasmicro v5 gyro. $15-20 usd. That transformed the car to a very capable AWD drift car. I also showed you how I got the rear suspension mod for a bit of suspension in the rear.
    Enjoy the content.

Комментарии • 40

  • @roadstar499
    @roadstar499 Месяц назад +3

    Would be nice if you showed how you installed a gyro since i have this car...thanks

    • @EidstaRC
      @EidstaRC  Месяц назад +1

      @@roadstar499 just added to my channel. Good luck.
      Please like and, share , subscribe.

  • @tyrrell0076
    @tyrrell0076 Месяц назад +2

    Very cool mod. I did the same but using two pieces of cardboard as springs/shocks with a new body attached, and works really good. I recomend for those who like the bmw, that at least the mustang chassis can be used with the DTM BMW M4 1/43 diecast from RMZ, and looks awesome. Built a realistic sandpaper track that gives it a lot of grip ( i dont use it to drift it) whilst both suspensions makes it look very realistic absorbing each little bump and the increase of weight from the diecast body makes it more drivable.

    • @EidstaRC
      @EidstaRC  Месяц назад

      @@tyrrell0076 cool. I’ll buy that body.

    • @dessaiweekers9295
      @dessaiweekers9295 Месяц назад

      @tyrrell0076 do you have a picture with your new attached body?

    • @tyrrell0076
      @tyrrell0076 Месяц назад +1

      @@dessaiweekers9295 yes, no problem. Tell me an email and i send you some images tomorrow. Its easier than what looks, just a bit of dremel work and pretty much done

    • @dessaiweekers9295
      @dessaiweekers9295 Месяц назад

      @@tyrrell0076 can you send it to d.s.p.weekers@gmail.com? Thanks! Really like to see how it turns out. I ordered the mustang one and the Porsche one. Thinking of painting the porsche one and add some stickers. I want to try to swap the top of the mustang one

    • @tyrrell0076
      @tyrrell0076 Месяц назад

      @@dessaiweekers9295 i just sent it👋

  • @filipshinigami7263
    @filipshinigami7263 Месяц назад

    Thanks for the video

    • @EidstaRC
      @EidstaRC  Месяц назад +1

      @@filipshinigami7263 of course. Please like and subscribe.

  • @Huss22-l9h
    @Huss22-l9h Месяц назад +1

    Cool

  • @albertdelbosco9686
    @albertdelbosco9686 Месяц назад +1

    Be nice if they made a pro version with rear suspension

    • @EidstaRC
      @EidstaRC  Месяц назад

      @@albertdelbosco9686 yeah. My suspension mod helps. But I’m hoping these really take off and they decide to upgrade with rear suspension and gyro.
      That’s why I keep posting to make them popular so the manufacturer can take notice and revise them for v2.
      Don’t forget. Like share and Sub :)

  • @albertdelbosco9686
    @albertdelbosco9686 10 дней назад +1

    I just ordered mine anyway to put bearings

    • @EidstaRC
      @EidstaRC  9 дней назад

      @@albertdelbosco9686 no way for bearings. Doesn’t need it.

  • @DorianGreer
    @DorianGreer 9 дней назад

    Can you get different textured tires? They're just too slippery, the ones you have.

    • @EidstaRC
      @EidstaRC  5 дней назад +1

      @@DorianGreer it comes with 2 sets. Drift and soft race. There is a company that makes some 3D printed tires for it. On AliExpress.

  • @carrioncrow8191
    @carrioncrow8191 День назад

    Where did you buy the car?

    • @EidstaRC
      @EidstaRC  8 часов назад

      @@carrioncrow8191 available on EBay or AliExpress

  • @Climax_Lv.15
    @Climax_Lv.15 Месяц назад

    hey man, I watched your vids and got a gyro (still being shipped) cause I have the same RC. (R34)
    do you reckon a better battery with a higher capacity will fit inside with a gyro installed? cause I am planning on adding under-glow as well. I'm worried that the stock battery isn't enough to power a gyro and more LEDs for a suspended amount of time.

    • @Climax_Lv.15
      @Climax_Lv.15 Месяц назад

      I also made the car RWD to make drifting easier.

    • @EidstaRC
      @EidstaRC  Месяц назад +1

      @@Climax_Lv.15 it can be added but looks like it will have to go po. Top of the chassis. More surgery than I wanted :). 200mah is a lot for that lil
      Car.

    • @Climax_Lv.15
      @Climax_Lv.15 Месяц назад

      @@EidstaRCDo you think 200mah is enough for LEDs and a gyro?

    • @EidstaRC
      @EidstaRC  Месяц назад +1

      @@Climax_Lv.15 yeah but it will reduce run time. With gyro I get about 10-15 min nonstop.

    • @Climax_Lv.15
      @Climax_Lv.15 Месяц назад

      @@EidstaRC ok

  • @Mr.Respect.-_-
    @Mr.Respect.-_- Месяц назад

    Hey i also want to buy one of these can you suggest me which one should i buy
    Porche or Bmw ( i cant take decision because i love both cars )😢❤

    • @EidstaRC
      @EidstaRC  Месяц назад

      @@Mr.Respect.-_- get the Porsche. More substantial and more stable. Also wider tires in the back. Don’t forget to subscribe please.

    • @t3floz
      @t3floz 15 дней назад

      @@EidstaRCdo you know if the other 2 models have different chassis? Thinking of buying one and want to buy the one that would be “best” for drifting

    • @henryvsop
      @henryvsop 13 дней назад

      ⁠​⁠@@t3flozI just bought the Porsche on aliexpress and it came with the gyro installed for $55 . I just added weight to it and it drifts good!

    • @t3floz
      @t3floz 12 дней назад

      @@henryvsop really? Could you send the link on discord or Reddit or something?

  • @abetotero2695
    @abetotero2695 Месяц назад

    it has a gyro already out of the bix? or you mod it

    • @EidstaRC
      @EidstaRC  Месяц назад

      @@abetotero2695 I modified. Look at my other videos and you’ll see how. don’t forget. Like and subscribe