ضبط بنس طنبور المناول GTO 52 Gripper control on transfer cylinder 1
HTML-код
- Опубликовано: 22 окт 2024
- #صنايعى #طباعة
#4لون جي تي أو
Heidelberg GTO 52, Offset printing, Damping system problem
لمتابعتي على صفحة الفيس بوك
/ profile.php
...
لمتابعة جروب شمس لصيانة وتجارة ماكينات الطباعة ع الفيس بوك
/ 83641
...
للاشتراك فى القناة وتفعيل الجرس
www.youtube.co....
لمراسلتى
ٍShams2adv@gmail.com
للاتصال : تليفونيا : 00201022201067
طباعة أوفست
تعليم ، طباعة ، اوفست
طباعة ألوان ، ألون ، كحول ، DDS
DDS Direct Dampening System
Plus Version
Quick Clamps Plate Change
Laser Cut Ink Blades
Weko Electronic Double Sheet Control
Weko T6 Powder Spray
Simco-Ion Anti-Static Bar
Numbering & Perforating
Tools/gauges
2.0 mm feeler gauge
Allan key, size 10
Adjustment
1.
Turn the gripper bar into an accessible
position.
The cam follower must be located on the
lowest part of the cam .
2.
Insert the Allan key, size 10)
between cam follower and cam
The high part of the cam is simulated.
The grippers are closed.
3.
Unscrew the adjusting screw (Fig. 2 /6).
4.
Slacken the cheese-headed screw.
5.
Place a 2.0 mm feeler gauge
between gripper pad and gripper
6.
Use the clamping piece to push the
compression spring until it is
compressed and tighten the cheese-headed
screws.
7.
Remove the feeler gauge (Fig. 2 /2).
8.
Checking/adjusting the gripper closing/opening
times.
Adjusting the gripper closing/opening times
ما شاء الله باش مهندس الله يعطيك الصحة والعافية بتشرح بطريقة سهلة وواضحة . أخوكم من سوريا المهندس محي الدين
حبيبي الغالي الله يبارك لك ياغالي
ربنا يبارك ارجو فيديو توضيحي عن تشغيل القلاب لمكنة الجي تي او لو سمحت ❤
موجود علي القناة ٢ فيديو توضيحي كامل لتشغيل القلاب ولتشغيل العدل
Thank you very much.sir.
Not at all my friend
تبارك الله على مهندس شمس تشرحلي على بلونسب يعني طابور اول
انا لا أفهم ماتريد بالضبط رجاء التوضيح
بارك الله فيك اخي ربنا يستر عليك
حبيبي وبارك فيك
الله ينور عليك يا هندسة ....
ربنا يزيدك من علمه
أصلح الله حالك وزادك من فضله
السلام عليكم ورحمة الله تعالى وبركاته عيد مبارك سعيد وكل عام وانت بخير
وعليكم السلام وكل عام أنتم بخير تقبل الله منا ومنكم
شكرا جزيلا هندسة
الشكر كل الشكر لله ثم لكل طلاب العلم النافع
Boa adica 👍
Thanks
SubhanAllah
سبحان الله والحمد لله
هل هناك فيديو بخصوص بنس الاستقبال. هناك إثنين بنس في نهاية .
لسة
يكون خير إن شاء آلله. وبارك الله فيك
@@redouneredoune227 حاضر
بالتوفيق ياغالي 🌹 🌹
اللهم آمين
ممكن فديو عن كيفية وزن رولات مكينة GTO لونين
حاضر
ممكن اعرف اي يعني وزن رولات لو سمحت
الحاجات دي بتيجى من الشركة المصنعة جاهزة ومضبوطه وايه الداعي للإعادة ضبطها ؟
هي بتيجي من الشركة اه لكن مهندس الميكانيكا او الميكانيكي المحترف، أو الصنايعي الموهوب بيركبها وبيقوم بضبطها كذلك لو القطعة دي باظت بتتشال وبتتغير وبتحتاج إعادة ضبط
مطابع شمس ماكينات GTO دي ماكينات عمرها مابتبوظ دي بتشتغل طول العمر 😂 بس انت كلامك مظبوط ياباش مهندس ممكن تتكسر لسبب أو لاخر 👍👍
ي معلم عندي مشكله توقف الورقه في الصدر ايش المشكله
تم الرد
معك أستاذ سعيد من المغرب المهندس بيقول تيك من المصنع يااخ المهندس سمش عند حق في كل شيء
شكرا لك يا استاذ سعيد يسر الله لك
خويا سعيد ممكن سؤال
احلي لايك
تسلم
مجهود مشكور ولكن اسمها cam follower مش فلاور ..... بمعنى تابع الكامه ... جايه من كلمه follow me يعنى اتبعني وجزاك الله كل خير
تمام وجزاكم مثله تابعني لو فيه اي أخطاء برجاء مراجعتها لتعم الفائدة واشترك في القناة
تم التعديل فى الفيديو الجديد تابعنا لوفيه أى خطأ رجاء التعديل لو تكرمتم
عاوز رقم حضرتك ياهندسة
01022201067
Por favor traducir a español gracias
Si Dios quiere, intentaré traducir a todos los idiomas. Gracias por su amable visita.
يا استاذ شمس انت كدة اللى بتقولة مش صح معاك الاسطا سعيد اللى هو بيكلمك
يا عمو سعيد جرب بس وهتلقاه هو الصح المعلومات دي من كتالوج هيدلبرج نفسه ومكتوبة بالتفصيل في الوصف باللغة الانجليزية لمن يريد الرجوع إليها لكن لو فيه خطأ في الأداء بتاعي ياريت تصححه لي كي يستفيد الجميع وحضرتك راجع معلوماتك
looking at immaculate surroundings, and immaculate inspection lightand expertise , i have come to one conclusion the machine is fucked
Excuse me, honor our humble channel
why should i
@@paulcarroll4003 My dear brother, I do not understand you. If you have a question or inquiry, comment clearly and we are at your service
معلم