Can I ask how you originally discovered this issue, I like repairing electro mechanical tape decks etc but I just don’t have the know how on electrical components
HI THERE i have the YAMAHA RX- A3030 Aventage but the problem is , there is NO POWER to the unit after kettle plug in and press power button in SO I DONT KNOW WHATS WRONG with it and i am not sure which buttons to press and hold in , to get it into service mode to run a DIAGNOSTIC and i cannot find A YAMAHA service repair centre close by to me between SUNDERLAND and NEWCASTLE ne34 7 area UK i was wondering if you could give me some advice on this problem or recommend someone that could help me restore this DISCONTINUED AV flagship ?? kind regards STEVE ???
Help me find the firmware for the EEPROM chip r1ex24128asas0a. I can not enter the engineering menu. Standby voltage is present. yamaha rx a810. I will be very grateful.
I've never worked no this model - you could check C932 on the main board in this model - follow the power cable - it should be near the mains connector, next to the fuse on the main PCB.
i have a question did you get any clicks or anything before you replaced the cap i recently got one of these units from the same era rx n600d to be exact for free and wondering if it has the same fault no power at all so i brought the same cap unfortunately mine has Ethernet and you have to disassemble everything to get to the cap. @@Justfixitmate
@@laszloTheJr I bought another similar Yamaha receiver and used the power board from that to replace the faulty one. It seems to have done the trick. I think that red relay box was the fault. It was clicking on and off randomly.
@@9hundred67 thank you for the prompt answer. I got a hint in the meantime that the elco-s are suggested to be changed. I will try it. Let me know if you are interested in my result. I am working on a RX-V459 anyway...
Хобби
Thank you for filing these! I've just turned on a donated one and encountered the same issue. I will be giving this a go!
It also worked on my RX-V659 receiver. Thanks!
Thank you for the information. I will give that a try.
Thank you for your time....helps us
Can I ask how you originally discovered this issue, I like repairing electro mechanical tape decks etc but I just don’t have the know how on electrical components
Osm idea i m from Pakistan Karachi ❤
Did the exact same thing but it keeps turning off, what else could it be? I dont see any sign of burn.
HI THERE i have the YAMAHA RX- A3030 Aventage but the problem is , there is NO POWER to the unit after kettle plug in and press power button in SO I DONT KNOW WHATS WRONG with it and i am not sure which buttons to press and hold in , to get it into service mode to run a DIAGNOSTIC and i cannot find A YAMAHA service repair centre close by to me between SUNDERLAND and NEWCASTLE ne34 7 area UK i was wondering if you could give me some advice on this problem or recommend someone that could help me restore this DISCONTINUED AV flagship ?? kind regards STEVE ???
Tengo un yamaha htr 5860 que no enciende la pantalla le agradesco su ayuda
Help me find the firmware for the EEPROM chip r1ex24128asas0a. I can not enter the engineering menu. Standby voltage is present. yamaha rx a810. I will be very grateful.
👏👏👏👏👏
Sir yamaha ka amplifier on nhi ho rha hai aapse kahan sampark Karen
Was really hoping to find same board and piece on my HTR-5920 to fix it, but electronics inside are different. Is not in the side or on bottom.
I've never worked no this model - you could check C932 on the main board in this model - follow the power cable - it should be near the mains connector, next to the fuse on the main PCB.
Have you ever worked on the ax 396, has the round capacitor on the power supply board
Cheers
Can a higher nanoferrid Polycarp be used as well, mate?
In my opinion, a like for like replacement is the safest option.
@@Justfixitmate Thank you. I appreciate your time. I will install the same one. 🙏🤗
i have a question did you get any clicks or anything before you replaced the cap i recently got one of these units from the same era rx n600d to be exact for free and wondering if it has the same fault no power at all so i brought the same cap unfortunately mine has Ethernet and you have to disassemble everything to get to the cap. @@Justfixitmate
My receiver is turning on and off and on and off and on and off, at random times like some kind of seizure. Do you have any ideas?
Hi, Did you solve the issue? Was the PCB in place when it was doing so? I did change the cap and it does the same here as well. Thank you in advance.
@@laszloTheJr I bought another similar Yamaha receiver and used the power board from that to replace the faulty one. It seems to have done the trick. I think that red relay box was the fault. It was clicking on and off randomly.
@@9hundred67 thank you for the prompt answer. I got a hint in the meantime that the elco-s are suggested to be changed. I will try it. Let me know if you are interested in my result. I am working on a RX-V459 anyway...
@@laszloTheJr excellent, definitely keen to know your solution also. It was a very frustrating fault.
What is the part that I gotta replace called?
It's a film capacitor. Not sure of the uF rating but the numbers printed on yours will identify it.
@@mumbles552 22nF 400V or 630V
I fix mine 3 times the cocke starter failing every now and then ,got fed up of the piece of junk and sold for scrap, never buying it again