@@atomicdmt8763 For sure I noticed on all the cars I tried on. Reduced fuel consumption. Increased power. The engine is much quieter. The car feels less heavy( you dont have to floor it as much as before to get up to speed)
Are you spryaing it in the part which gets the air from the air filter? So If I remove the air filer hosuing from my bmw120i with N46 engine the air coming out of the air filter and going into the part is where i need to spray this? I have a BMW120i and it has engine light with CAT efficiency code. appreciate for help
@@wonderwalls3565 upstream of the air filter and MAP or MAF sensor ( it shouldnt come in contact with any sensor) the closer to the throttle the better
@@AntonOliinyk for sure it will throw a code that you can clear later once you’re done cleaning. In order for the car to run without MAF sensor connected you have to depress both gas and brake pedal simultaneously while starting the engine
@@JonnatanPerez-s3l company says you need to use both at the same time. But if my car was hard to work on. I would use both at the start. & afterwards I will keep using the fuel added one on constant short mileage intervals to maintain the cat clean.
Unplug the air flow sensor harness first then start the car. If you unplug the MAP sensor while the engine is running, the engine will shut off. If the engine does not shut off when you unplug MAP sensor while the engine is running, possibly the sensor is faulty or the harness is not good.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I did a double dose yesterday..... and there seems to be a very noticable effect!
@@atomicdmt8763 For sure I noticed on all the cars I tried on. Reduced fuel consumption. Increased power. The engine is much quieter. The car feels less heavy( you dont have to floor it as much as before to get up to speed)
@@fahadalsowaidi7965❤
@@fahadalsowaidi7965 ture, I did it on sonata 3.3L , very good effect but I don't know how
Does this work well with GDI engines? Is reprogramming the throttle required afterwards?
@@thisised9178 should work will all cars. Throttle reprogramming requirement depends on the car itself. Some cars need it some don’t
Are you spryaing it in the part which gets the air from the air filter? So If I remove the air filer hosuing from my bmw120i with N46 engine the air coming out of the air filter and going into the part is where i need to spray this?
I have a BMW120i and it has engine light with CAT efficiency code.
appreciate for help
@@wonderwalls3565 upstream of the air filter and MAP or MAF sensor ( it shouldnt come in contact with any sensor) the closer to the throttle the better
@@fahadalsowaidi7965But how the motor runs with MAF sensor measuring nothing? I belive the ECU will throw too rich or too lean air/fuel mixture.
@@AntonOliinyk for sure it will throw a code that you can clear later once you’re done cleaning.
In order for the car to run without MAF sensor connected you have to depress both gas and brake pedal simultaneously while starting the engine
I have an alfa romeo giulietta , 1.4 turbo , and the catalytic converter is blocked , will this work?
@@amrhatem1107 it should just make sure to use correctly as explained in my other video
Did same and my exhaust manifold and cat overheated until red glowing hot. Is that normal?
Perhaps it is too clogged , that never happened to me and i’ve tried on multiple cars
If it is red hot glowing it is clogged you should immediately take it to a repair shop to remove it, it is better without it than with a clogged one.
The bottle of catalytic cleaner has 300ml how much of this bottle can i used on a ford fusion 2012 2.5 ?
Use the entire bottle
Whats the difference of apliying it trough the troudle body than aplying it into the gas tank.?
@@JonnatanPerez-s3lthere are 2x different products, one for the gas tank and one to be applied in straight in the engine.
@@JonnatanPerez-s3l company says you need to use both at the same time.
But if my car was hard to work on. I would use both at the start. & afterwards I will keep using the fuel added one on constant short mileage intervals to maintain the cat clean.
Does it work with mercedes benz w203
@@edwinwilliams9780 should work with all cars , just use it as described in my other video
I have fx35 and I don't know how to keep my VQ35DE running without air flow sensor!!!
IT should be the same, keep both gas and brake pedals depressed and start the car.
How many litters of gas tank its used for a bottle of calytic cleaner .?
@@JonnatanPerez-s3l 70 L max
You don't pour the cat cleaner in the fuel tank.
Your spray it into the air intake like shown in the video.
Unplug the air flow sensor harness first then start the car.
If you unplug the MAP sensor while the engine is running, the engine will shut off.
If the engine does not shut off when you unplug MAP sensor while the engine is running, possibly the sensor is faulty or the harness is not good.
What brand / type / product are u using
@@laque900 liqui moly catalytic system cleaner
is that a throttle body you sprayed?
@@jigendaisuke yes it is the throttle body
@fahadalsowaidi7965 thank you God bless
Does it work on diesel engines??
@@issamelhachimi1826 I don't think so
Pls i wanna know if this product work on diesel engines? (The one that has to be sprayed in the intake)
@@fahadalsowaidi7965 ok brother thank you