hi in my project the customer wish install a moviment sensor in closet to turn on the light for a while , could you show how i configure a actuator for some minutes and so turn off?
@@PoseidwnTech your videos did. So far I have built a mock up. It's Dinuy brand products. The wiring all works if I manually switch on the dimmer and relay actuator from the interface on these devices. I have to try programing it in the next few days.
Thx a lot for your videos) They are very usefull for me. I have one question, is it possible add AJAX security system to iridium and use KNX lighting control and securiti control in one application like irridium or something else? Also I would like to ask you what the best way to start learning KNX and other smart house things to became proffesional installator. I am live in Portugal and already have some basic installation of smart home(wi-Fi, CCTV, Apple homeKIt, Z-wave devices) but I am always looking for best SH solutions. I will be very appreciated for any help)
Thank you for your comment. It would be great for Ajax Alarm to be able to interact with Iridium Mobile. At the moment Ajax API is only available for companies so i will send a require to Iridium Mobile to contact Ajax and i will let you know for the results!
The best way to start with KNX is to be certified from a Certified KNX Training Centre. Just visit the link below for more info : www.knx.org/knx-en/for-professionals/get-started/get-certified/index.php Your knowledge about Smart Home technologies and KNX will help you in order to create amazing solutions!
μηπως εχεις καποιο e mail που να μπορω να επικοινωνησω μαζι σου πριν ενα μηνα τελειωσα το σεμιναριο και εγινα κνχ parther και χρειαζομαι καποιες πληροφοριες συγχαρητηρια για τα βιντεο σου ειναι πολυ αναλυτικα!!!!
"KNX GLOBAL" is an international group from all countries. If you have worked in KNX before or you wan to ask a question , join our group. You need to answer the question " Have you worked in KNX? ". If you have not worked yet, you still can join our group to learn . Without answering that question we can not be sure that you want to join our group.
please step by step teach, how do you verify the green tick at ""adr,prg,Par,Grp,Cfg"" please teach how to full,partial download this video not very practicable
The green tick means that everything has been downloaded in the KNX device. I believe that for better understanding you have to watch first this video : ruclips.net/video/WxD8TScEAP4/видео.html
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
great, thanks a bunch, it´s help me a lot, i´ll try to connect a ordinary movement sensor in UI knx and your video inlighted me
Thank you for your comment!
hi in my project the customer wish install a moviment sensor in closet to turn on the light for a while , could you show how i configure a actuator for some minutes and so turn off?
Most useful. I have a project that a consultant did with much of this. Just trying to understand how it was done.
I hope that our video will help you to understand!
@@PoseidwnTech your videos did. So far I have built a mock up. It's Dinuy brand products. The wiring all works if I manually switch on the dimmer and relay actuator from the interface on these devices. I have to try programing it in the next few days.
very informative video, thanks
Thank you for your comment!
Thx a lot for your videos) They are very usefull for me. I have one question, is it possible add AJAX security system to iridium and use KNX lighting control and securiti control in one application like irridium or something else? Also I would like to ask you what the best way to start learning KNX and other smart house things to became proffesional installator. I am live in Portugal and already have some basic installation of smart home(wi-Fi, CCTV, Apple homeKIt, Z-wave devices) but I am always looking for best SH solutions. I will be very appreciated for any help)
Thank you for your comment. It would be great for Ajax Alarm to be able to interact with Iridium Mobile. At the moment Ajax API is only available for companies so i will send a require to Iridium Mobile to contact Ajax and i will let you know for the results!
The best way to start with KNX is to be certified from a Certified KNX Training Centre. Just visit the link below for more info : www.knx.org/knx-en/for-professionals/get-started/get-certified/index.php
Your knowledge about Smart Home technologies and KNX will help you in order to create amazing solutions!
μηπως εχεις καποιο e mail που να μπορω να επικοινωνησω μαζι σου πριν ενα μηνα τελειωσα το σεμιναριο και εγινα κνχ parther και χρειαζομαι καποιες πληροφοριες συγχαρητηρια για τα βιντεο σου ειναι πολυ αναλυτικα!!!!
Σε ευχαριστώ πολύ για τα καλά σου λόγια! Το email για να επικοινωνήσεις μαζί μας είναι : info@poseidwn.tech
Is there any live community somewhere in the Internet about KNX? Maybe forum?
In my opinion the best forum is a Facebook's group with name "KNX Global".
@@PoseidwnTech , "KNX GLOBAL" has the proud of having a member like you.
There is a huge forum, but only in German...
"KNX GLOBAL" is an international group from all countries.
If you have worked in KNX before or you wan to ask a question , join our group.
You need to answer the question " Have you worked in KNX? ".
If you have not worked yet, you still can join our group to learn .
Without answering that question we can not be sure that you want to join our group.
please step by step teach, how do you verify the green tick at ""adr,prg,Par,Grp,Cfg"" please teach how to full,partial download this video not very practicable
The green tick means that everything has been downloaded in the KNX device. I believe that for better understanding you have to watch first this video : ruclips.net/video/WxD8TScEAP4/видео.html
Home wiring
Home wiring