300zx RB26 Z32 Swap Info Video (Nissan Skyline GT-R RB26DETT into Z32)
HTML-код
- Опубликовано: 27 июл 2014
- This is a video I made a couple of years ago and just now got around to uploading it. It shows you how parts of this swap came together. Have had on and off cooling issues from 2009 to 2013 and it is finally getting completely re-done (Cooling system) and several other things this fall.
Авто/Мото
Bad ass Z, this got to be one of the best z32 rb swap on youtube hands down.
you obvioulsy dont know anything about these cars. the stock engines in them are fast as is, and with a little tune you can easily make mean power. get off the internet before you give more people autism from reading your comments.
Scott Brixey why you mad! and we dont get the fuck of yr opinion stick it up yr ass. going on peoples video and saying shit fuck you
Scott Brixey this peace of shit Scott mad cuz he dont have the money to do what he want lmaol fanboy
+Scott Brixey with yr broke ass 13.00 minimum wage u couldnt afford a Z so quilt giving us yr shitting broke ass opinion end of story....
Scott Brixey I fill sad for you dude
I am doing a somewhat different swap with my 96 Z32 slicktop. I am going with the VK45DE with a CD009 Z34 6 speed and the Z32 TT rear end. Good build you started. I did a lot of research and your build did help with some troubleshooting. Will be posting my videos later this fall or early spring. But really enjoyed your commitment.
Thanks for being up front about the oil blowby. Enough alone to solidify me swapping a 2jz over the rb.
The RB26 is really bad on blow-by ... My nissan ka24de motor is also some what big on blow by ... Not sure why but when i get on it, i can fill my catch can ...
very nice presentation of the Z. Clean build quality while still being a subtle.
Thanks! Watch for new videos soon!
Holy damn man talk about putting in work for such a build. But she does look great and came together even better.
Nice swap and a lot of great info. Shiner TX? It's ironic that I found this video by chance because of a poor Z sitting at the end of my town in PA with a blown engine, because the company I work for had a job at the brewery there. A couple weeks before we were going to ship out, they hired a different crew. Heard that it didn't go too well for them. Wish I woulda been out there. This would have stopped me in my tracks just for how clean it is, the RB26 swap would have blown my mind! Good work, subscribed
Great video and beautiful z32 !!
that's a pretty clean engine bay. this must be awesome to drive aswell
Beautifully built man!
Holy shit that thing rips
Absolute Beast now :) Nice work
thank you for making this video- awesome information amazing build. how much does your car weigh?
nice build, clean car. i was thinking about putting one of these in my forester.
thats like a dream car, cool build
Looks great in that bay. The inline 6 exhaust. Much better than the VG. The RB is so heavy though and sticks far forward of the front axle.
Hell yeah! Love it man.
Beautiful man...just beautiful..
looks really good Scott! How much boost does this Z produce?
Hopefully you can bring it sometime to Houston !!!
This guy deserves an applause
this Z is badass it hits me a bit that its a rb26det not a vg30dett but its still Nissan with a Nissan engine so i have no problems watching this over and over.
Watch for new videos soon. Has entirely new exhaust, ECU and other setup.
Nice!! Currently doing this same swap on my 91 Z32 TT.
Thanks!
it's crazy how you red line it and response like nothing that's pretty sick bro ... i myself have 92 300zx don't know what im going to do with yet
I wouldn't risk running those fuel lines that close to the downpipe on such a awesome swap.
Thanks. New setup resolves this. Watch for new videos soon!
Nice swap man wow.
Thanks man!
Great video!
pretty damn sick man
This is inspirational
Good stuff man, just subbed. Are you from the Dallas area? I saw you bought your JDM engine from Arlington. I am from the North Dallas area and was considering them and I just wanted to see how your experience was with them. PM if you feel more comfortable asking there.
well done , now can i swap my 1993 300zx engine with 2017 infiniti q50 twin turbo , let me know please
Beautiful!
Love your Z it is very clean can't wait till my z looks that clean. do you have a detailed write up of your swap.
I'm working on one. Keep an eye on the videos I upload.
Seems u running twin MAF sensors with aftermarket ECU (D jetro) no AFMs, Very big job in 300zx i knew, but that is fantastic job done. I am now challenge myself diy RB26 in my s13 seems bit more easier anyway similar works as yr one.
my dream to do on my Z32 nice man
Thanks!
My dream/goal for my Z!
Thanks!
what do you do when you need parts for the engine, just order them online and wait months for the parts to arrive from Japan?
Just trying to learn here. Why would you swap the engine when you can achieve the new HP with the VG30?
Is it plans for more further boosting?
Is it worth the money and time?
Love the license plate.
Have you since removed the tint from turn and fog lights?
I always thought the 300zx should have come with a 3.0 inline six. Would have been a much better car. With inter changeable GTR parts etc. Ive owned TWO TT Zs and this configuration just seems better to me. Not that Im more qualified than Nissan engineers but yeah.
I wonder why you start at 40mph. Oh yeah, traction control issues. What an amazing car.
So fucking nice .
Thanks man!
dayum 3 years.. you did this all at home? how much did it cost you? if you did it yourself then labor probably not needed. i wanted to know how much this would cost with parts and labor. i would love to do this with a s13 with a RB or SR20
My favorite motor
Awesome!
Thanks!
Do you think possible I can swap my Nissan Maxima 3.5 liter engine for the Nissan GT-R 3.7 liter engine?
Hey man nice swap! I would deeply appreciate it if you could tell me where you got the Blue, Red and Silver piping/tubing? Thanks man
I bought it from a race shop locally, but you can get it almost anywhere online.
awesome!
How much you spent with the hole car? I mean, the engine swap, the fairlady, etc.??
Awesome piece of engineering... I love these cars but the VG engine is balls would love to put a SR20 S15 model in one of these
you want to put a 4 banger in a 300zx? oooook.......
VG aint "balls" lol.
@@dustybryant9049 look up MykeMikes SR20 Z and you’ll change your mind
What an amazing build. I'd love to do this swap. But got a 10k budget. 😔
Going to probably need a bit more than that unfortunately
The motor alone is at least 10k 😭
Could you put a aluminum plate between the turbo down pipe and the turbo and run the gas lines behind it?
Yes, you could - but my current setup eliminated that.
Nice z bro
what are you using for ecu and wiring harness?
3 yr process .. I would have NOT done it. I like it simple and easy. The other issue is this style 300zx never made it to the street racing scene in the 90s and the early 2000's ... So this car alone is NOT a head turner and nobody is looking at them. But you did one hell of a job and i give you credit for it.
@scoot H How expensive was this swap?
So I'm probably going to get booed yelled at and embarrassed but I live in NYC where we have a lot of stop and go traffic and I want to maintain my automatic transmission My question is will the auto tranny go into the the 26 bel housing and work?
if i wanted to do this swap on my 300zx, what does the cost look like ?
do you think this swap was more or less work than an LS swap?
How much power did u gain on the swap and about how much did u spend and did u recommend it in stead of put the money on the original engine
If I had to do it again, I would have probably stayed VG30DETT. It is VERY expensive ($20,000 USD on up... I had spent closer to $30,000 but over 3 years time)
What did you do for a clutch. i have the rb clutch and flywheel
baddassss!! its what ima do to my z :)
Thanks!
Should do a 2020 update video
What mounts did you use and can I have some made for my swap rb25det neo swap...if you can make them ill pay you for them and then you ship them
Hi nice swap
I'm from Mexico and I'll like to do the same swap as you did.
Please help me on my questions.
The rb26dett can work with the oem tranny of z32, I seen your video and I don't understand if is awd or rwd and if you use the tranny of the z32.
Thanks for reading my message and I'm very interested on made your swap into my car.
Interesting specs at the end RB has way more horsepower but interestingly not that much more torque, displacement thing??
The RB26 = 2.6L. The VG30 = 3.0L. It makes more power, but less torque than the VG30DETT that was in it previously.
Scott H what was wrong with the vg30 if you dont mind me asking? why did you decide to swap motors? what prohibited you from achieving big power with the vg? im about to build mine for big power so an answer to this question would be greatly appreciated! :)
I luv it
Thanks!
I always wanted to do this swap.
It isn't cheap, or easy!
Scott H I know, which is why i don't want to do it anymore after i posted this comment. I'll stick with the VG TT engine, those things are highly underrated anyways.
I have a 91 TT z32, now i want to get another one and RB swap it
What did you use for the wire harness and ecu. Thinking of doing this swap
Custom made wiring harness. In this video it was running a PowerFC D-Jetro for the R33 GTR.
roughly how much did the swap cost?
If I don’t end up buying a Supra as my next car I’m gonna try to get a 300ZX and either RB or 2JZ swap it.
me too but i don´t want a jz i a want to keep it nissan
@@blackmetalgoat9060 smart move, smarter choice.
Does it pass inspection?
It's always puzzled me why Nissan never did this or 350-370Z with Skyline/GTR parts. Even if it was only a limited run. Yet... they made the insane Juke GTR for an insane price. Same problems as General Motors!?! Too big to know which way is up? They would have sold a lot more Z cars.
Sweeeeeeeeeeeeet!!!!
is your 300zx rb26 6 speed if so what transmission did you use
I explain it in the video. 5 speed too.
Did you use the z32 computer or had to get a R34 computer?
Used the R33 GTR Apexi PowerFC D-Jetro
Bad ass. I really want to get one done. How much did you spend total?
It was far from cheap - but also took well over 3 years to complete. Budget $20,000 and go up from there.
Yea i was planning on 24k. Would you rather just buy one thats built already or build as you go? Im thinking of just buying one
maxnguyen22 The rule of a serious rebuild/swap is set a budget, then double it and add some more on top however I don't see why you couldn't do this for $40k
maxnguyen22 whats wrong with the vg30dett?
Kern O'Leary well some car guys say just go with the rb. They say its not built as good or doesn't last as long. But way cheaper....
What budget could one do this on with an na rb25?
It's all become so much more expensive since I originally did this swap.
Broo i was imaging having the same car omg i wante to build it now
Thanks man! I sold it back in 2017 but it's still around. The guy that bought it is building the internals 👍🏼
What kind of body kit do you have on your 32?
It is a 1999-2000 model Z32 (Japanese) front bumper. It is an OEM part. Every other exterior body part is stock other than taillights and the spoiler.
Sometimes to fix that high idle you can seal the throttle body with dry molly lube. check my video.
Noted. Thanks!
How much was the engine
I have seen the face of GOD!
I'll get the GTR R35 swap with the V6 to the L6/RB26 Twin Turbo. I wanna do that.
MMM... would be $$$$
wait, how much?
Did you install the skyline transmission on the Z too?
Skyline bellhousing. Z32 transmission
SNiPEOO7 why not do it?
Scott do you have the full build spec sheet of your build
FerrariLamborghini24 I'll post one up shortly
how much did you end up spending on the swap if i may know?
All the monies
Let me know when u ready to sell it
cad18 and sr20 nissan engines are other good options for these cards.
Put a video of you driving this bad boy
Check my other videos. There are also newer ones coming soon!
Don't wanna be that guy but it's actually an RB26DET since it's a single turbo, not twin.
True. LOL
Only thing I have to say negative about your vehicle is that the custom license plate is stupid, otherwise awesome stuff!
Vg30dett is a really powerful motor ....... Why go though all that swap
That’s true, my only problem with the VG is how much room it takes, just about nothing in the engine bay
ruclips.net/video/zI9eSEbJ7f4/видео.html
Scroll to 4:18
That much time, money and effort into a VGTT would make it super dooper fast.
is this car for sale?
:O
The only thing that I dont like is the 5 speed, I think 6 speed is better But good job.
The 5 speed is plenty. Can still hit 180mph very quickly.
Do you still have AC and Power steering?
power steering, yes. A/C no.
+Scott H thanks can an auto tranny work and how? last question
+Scott H Why no A/C? Was it a compatibility issue or you just didn't feel like dealing with it since you already had overheating issues?
Lion Celica I know it's stupid but Iive in the city a lot of stop and go with a 20 mph speed limit. Hope that answers it.
Joe Jackson
I live in the city too. Austin Texas 3rd worst traffic in the nation right after LA and NYC. I love manual, but goddam I know whachu mean. I stay two hours later at work just to avoid rush hour! But that works for me and lets me still drive stick.
Jealous!!! I wanted to do the rb26 swap in my 96 z32 (NA)
Thanks! IT is an amazing swap. So much easier to work on now too.