I followed you step by step and the protector went on perfectly. This is the first time I've used this brand and it's the first one that didn't have pesky bubbles left over. Thanks for helping me do a beautiful job.
see @dragonmanpro's comment below (and my response to it) for notes on correctly using the guide stickers. used properly, they remove the sketchiness of the make-it-or-break-it step (that one-chance-only sandwiching of the protector and the screen).
Thanks for your help. I got this brand and Amazon had put inventory stickers all over their English instructions on the box, and the website they said to go to for a video was a broken link, so I appreciated this. Went on perfectly even though it doesn't have an aligning bracket like some other brands.
Thanks Todd. An extremely clear and well-paced tutorial that really helped me. I wasn't sure which side of the glass protector needed to go against the screen, so your guidance was critical! Loved your calm delivery too. :)
Thank you for this video! Just helped my mom install hers. Better than the instructions that came with the item. When I tried to scan the QR code that came in the packaging, my cell provider said something about going to a malware site. 😮 So your video was most helpful. 👍🏼
Zero bubbles on my first try... it kind of just connected from the middle to the sides by itself perfectly but i used 3 guides on one side instead on one on each side.. thanks 4 the vid
Great guide. I actually found it easiest to not use the guide stickers at all and just hold all four corners of the protector with my thumbs and forefingers. Everything else went very smoothly.
Thank you, followed the steps and still got a few bubbles, probably atom level spec of dust landed after wiping several times and using the dust absorber sticker. I'm just going to leave it as is because there are only a few and they are tiny. I have another 2 in the pack to get it right next time, just shows I need to dust the room I'm in more. Your guide was perfect and the only reason I failed was on my end. Again, thank you Todd.
I bought the same one from Amazon. But no Instruction Book! Aren't you supposed to put the Guide Stickers on ONE SIDE of the phone? Then use 2 of them as a HINGE?
You should try and place the guide stickers on one side of the phone like door hinges with the screen protector face down on the phone before you start the cleaning process. Just my opinion.
^THIS IS THE ANSWER TO THE GUIDE STICKERS! place the screen protector (with the clear protective film still attached to the screen protector) centered properly on your screen, then attach two stickers on one side, connecting the screen protector to the phone, like 2 little hinges. Imagine you're attaching the front hard cover to a book. press/rub the stickers down to both surfaces so they stick well through the process. now, "open the book" (lift the protector off the screen, on the hinges), then proceed with the screen cleaning. then carefully remove the protective film from the inside of the protector (here's where you will thank yourself for pressing the stickers down well). then carefully "close the book". once in place, you can carefully remove the stickers.
Thanks for this guide. I have the same pack for my iPhone 12mini and this was the 2nd protector I was using from the pack and thought I'd see if anyone had used the guide stickers because as you said there was nothing in the instructions. I followed your video and didn't have an issue with the same location as your stickers... But I did have the mini so was a smaller screen. Thank you again. 📱
It says to press down on the center for 10 seconds, did you do that off video? I’ve only put screen protectors on myself like 2 times and it worked out but I get shaky and think I’m going to mess it up!!
The whole reason I looked for this was to get a little more guidance on the guide stickers. You barely touched on it when that was the part that I needed the most. Next time, please give a little more assistance on how to apply (or where) to apply the guide stickers. This was left unmentioned by the manufacturer as well.
Tip for you: 1. Turn on the shower on high heat, open it's door 2. Let the room get super steamy like Mary J Blige 3. Wait around 4 minutes, steam and dust steadily fall down 4. Clinical dust-free room
This is the worst screen protector that I've ever tried to install! Guide stickers are a joke, the instructions included with the protectors are worthless. the methods provided by Todd are better than the manufacturers but still did not work for me. I tried to install all 3 screen protectors but had issues with each of them, thankfully I bought from Amazon so I can return this garbage!
This is the first time I’ve ever done it successfully in all these years! You just never know. I’ve gone through multiple attempts in the past without success. I’ve had to order new screen protectors and then beg someone else in my family to do it. 😂
I followed your instructions and it's the first time I've been able to get a screen protector on my phone without ruining it. Great video, thanks
I followed you step by step and the protector went on perfectly. This is the first time I've used this brand and it's the first one that didn't have pesky bubbles left over. Thanks for helping me do a beautiful job.
.k opoyte🎉😮😅😊
see @dragonmanpro's comment below (and my response to it) for notes on correctly using the guide stickers. used properly, they remove the sketchiness of the make-it-or-break-it step (that one-chance-only sandwiching of the protector and the screen).
Thanks for your help. I got this brand and Amazon had put inventory stickers all over their English instructions on the box, and the website they said to go to for a video was a broken link, so I appreciated this. Went on perfectly even though it doesn't have an aligning bracket like some other brands.
Thanks Todd. An extremely clear and well-paced tutorial that really helped me. I wasn't sure which side of the glass protector needed to go against the screen, so your guidance was critical! Loved your calm delivery too. :)
Thank you for this video! Just helped my mom install hers. Better than the instructions that came with the item. When I tried to scan the QR code that came in the packaging, my cell provider said something about going to a malware site. 😮 So your video was most helpful. 👍🏼
Zero bubbles on my first try... it kind of just connected from the middle to the sides by itself perfectly but i used 3 guides on one side instead on one on each side.. thanks 4 the vid
This is the easiest screen saver I’ve used. Went right on. No bubbles.
Great guide. I actually found it easiest to not use the guide stickers at all and just hold all four corners of the protector with my thumbs and forefingers. Everything else went very smoothly.
Thank you, followed the steps and still got a few bubbles, probably atom level spec of dust landed after wiping several times and using the dust absorber sticker. I'm just going to leave it as is because there are only a few and they are tiny. I have another 2 in the pack to get it right next time, just shows I need to dust the room I'm in more. Your guide was perfect and the only reason I failed was on my end. Again, thank you Todd.
Thanks for demonstrating the process. It was very helpful to see someone else go through the process first.
Thanks for this and the tips on where to place the sticker guides. Super helpful!
How do you remove the screen protector if you need to down the road? I'm concerned that the adhesive will mess up the phone screen upon removal.
My kit didnt come with any wet or dry wipes, i thought their might be a removable coating for the front also, like the flimsy protectors
Thank yo so much for your guide. It has been really helpful to install the screen protector knowing exactly what to do in every step. Congratulations.
I bought the same one from Amazon. But no Instruction Book! Aren't you supposed to put the Guide Stickers on ONE SIDE of the phone? Then use 2 of them as a HINGE?
You should try and place the guide stickers on one side of the phone like door hinges with the screen protector face down on the phone before you start the cleaning process. Just my opinion.
^THIS IS THE ANSWER TO THE GUIDE STICKERS! place the screen protector (with the clear protective film still attached to the screen protector) centered properly on your screen, then attach two stickers on one side, connecting the screen protector to the phone, like 2 little hinges. Imagine you're attaching the front hard cover to a book. press/rub the stickers down to both surfaces so they stick well through the process. now, "open the book" (lift the protector off the screen, on the hinges), then proceed with the screen cleaning. then carefully remove the protective film from the inside of the protector (here's where you will thank yourself for pressing the stickers down well). then carefully "close the book". once in place, you can carefully remove the stickers.
Good video. The Guide Stickers do not stick very well so press them on.
Thank you because I was so lost as to how to do this without jacking it up. This screen protector is better than the $50 ones at T Mobile
Great job Todd...I suck at this so will try to duplicate your actions as I have just bought from the same company for my Samsung.
Thanks for this guide. I have the same pack for my iPhone 12mini and this was the 2nd protector I was using from the pack and thought I'd see if anyone had used the guide stickers because as you said there was nothing in the instructions. I followed your video and didn't have an issue with the same location as your stickers... But I did have the mini so was a smaller screen. Thank you again. 📱
The instructions that came with it were of no help, thanks for this.
Finger print reader test?
Thank you so much for the demonstration and helpful tips you added after your installation! You helped make this an easy application! 👍
Appreciate the video, little tips and tricks always help, went on great, thanks! 👍
Totally stress free. Thank you for the tutorial 🙌
I have no instructions in my box. Thanks for the video!
Great video allowed me to fit without ending up with bubbles
Thanks Todd! Followed as you're video described and it worked great! - Dave
Thank you that was so helpful.
Nicely done. Thank you very much for sharing. God bless you.
Thanks very much. Very easy to follow.
wow your video made this job super easy thanks
Exactly what I needed. Thank you.
The little rectangular stickers are there to create a hinge. Checkout other vids to see how to do it.
Thank you. It worked really well.
I usually clean the table before doing these screen protector installings.
Really appreciate your vid. Very helpful.
Thanks this helped a lot 😅
Awesome video, I did it on the first try!
Thank you for the tutorial
super useful tutorial. thank you.
I like your careful approach to the installation and encouragement to clean the screen completely.
It says to press down on the center for 10 seconds, did you do that off video? I’ve only put screen protectors on myself like 2 times and it worked out but I get shaky and think I’m going to mess it up!!
Thank you!
very helpful!
Thanks Todd! x 2
Fire 🔥
The whole reason I looked for this was to get a little more guidance on the guide stickers. You barely touched on it when that was the part that I needed the most. Next time, please give a little more assistance on how to apply (or where) to apply the guide stickers. This was left unmentioned by the manufacturer as well.
Why 3 protectors required while the technician showing us fixing only one??
Reserve
The screen protector may crack if dropped. If it does, you have 2 replacements.
Thanks.
am I so ass at applying screen protectors that I've fucked up the simplest one on the market? Istg I can't remove the bubbles
Little bit of explanation clarifies everything.
Tip for you:
1. Turn on the shower on high heat, open it's door
2. Let the room get super steamy like Mary J Blige
3. Wait around 4 minutes, steam and dust steadily fall down
4. Clinical dust-free room
Respekt 👍
This is the worst screen protector that I've ever tried to install! Guide stickers are a joke, the instructions included with the protectors are worthless. the methods provided by Todd are better than the manufacturers but still did not work for me. I tried to install all 3 screen protectors but had issues with each of them, thankfully I bought from Amazon so I can return this garbage!
Got to learn how to put screen protectors on my man that’s not the brand or the screen protector it’s you , no offense anything hope Nun was taken
No offence but the scream protector is perfect is just you sorry
This is the first time I’ve ever done it successfully in all these years! You just never know. I’ve gone through multiple attempts in the past without success. I’ve had to order new screen protectors and then beg someone else in my family to do it. 😂
First attempt was a total disaster then I found your video. Second attempt……Succss.
Ez Pz
🤓
So easy to follow, worked as described. Thanks Todd