Was there a reason why you didn’t select Quad for aircraft type? And you just selected an acro plane? Thanks in advance. I know it has the option for quad in aircraft type. Thank you.
I have my spektrum receiver( spm4648) plug to my wizard ts215 and it fails to bind with my DX8, I was using this receiver in my conspiracy drone. Why it doesn{t bind with the wizard, any ideas?
having some issues. got a brand spanking new drone. got it to bind. buuuut... the channels are messed up big time! my pitch stick is the only one that gives off input signals. but on 5-7 different channels. and no smooth motion.... been trying so many different things. and no matter what i look up. i cannot get it to work... regardless. a bit info: using spektrum dx6 (yes i know you want to say i should change it damn trolls x'D but thats what i got, and my economy isn't what it used to. and had this for my fixed wings so thats what i need to work with) got a SPM4649T reciever (also new, not updated. so as stock as i can have it) and the drone it self is the UAVfutures 99$ inspired drone. have tried the newest 3.5.7 aswell 3.5.6 firmware of betaflight on the FC (Racerstar StarF4S 30A) but it's all the same. hope someone can help?
I am having trouble with channel mapping after updating to betaflight 3.2.2 on my piko blx. the roll and pitch are on the aux channels no matter what I do. I have changed the settings taer, aetr etc. please help. I am using a redcon rx
Theodore LengKong the only hard part for me was that i had a receiver with eu firmware and a transmitter withinternational firmware so had to flash the xsr receiver but connecting to it was kind of easy
I am having the same problem with my x racer f303 3.1, No stick response in beta Flight. Did you ever figure out how to solve the problem? Please respond! Please!
any luck? I'm in the same boat. nothing shows up on screen " colored bars in beta flight" I have checked Rx ports. This happens with my baby hawk and my 90GT Kingkong.. Least I can fly my whoops without any problems.
Same problem with my two drones! Both my Vortex 250 Pro Ummagawd and a used drone with a Naze FC stopped working. Thought it could be my DX9... but my Inductrix Pro still works fine (and I haven't hooked it up to Betaflight recently). Was there a recent Betaflight update? I was running 3.2.1 when these problems occurred. So I downgraded to 3.1.3 hoping this would solve my problem of not seeing any stick inputs on Betaflight "Receiver" tab. No luck. Same problem. Getting upset... Please update/reply if any readers have a solution!
I really hate spektrum now. Been trying for hours to get my DSMX to go into bind mode via betaflight bc of course bind buttons aren't a thing. About sick of it. Might get a new radio/receiver.
This is a different method plus easiest to set up. Why do many others go into betaflight with rd range and input values there like min 1020 max 1880 then add those in cli to get close to 1000 and 1880 to get 1997. My brushed and brushless quads I never set but upped to 125 to get arming. Forgot that method since done one just copy and paste to new quads lol but my mid is around 1070 and max is around 1860 changing this according to your setup to see what I have been doing wrong lol
Alright I did this and my quad now flips like 5 times on a slow roll lol a slight fast bank and it wants to spin out of control. Before I thought my quad was on rails. Dunno what has happened.
Alright update my rates were and expo needed to be dialed way down with my endpoints at 1000 and 2000. My original end points seem more stable. Will keep it this way and get used to it. Thanks for this video
My receiver have been already binded. The rest of instructions worked perfectly. Thanks!
Thanks for leaving ur mistakes and not trying to cover it up
You are amazing teaching! Finally I got it! Thank you very much. DX8 user.
dx18 user here
Betaflight setup and binded successfully, Control Setup as you instructed but the Racer Drone doesn't react with the DX6e transmitter?
I can't get it to bind. Says bind failed every time. Moved my quad all the way across the room and still no go.
Joesph Pacheco go outside your WiFi’s will confuse it
Was there a reason why you didn’t select Quad for aircraft type? And you just selected an acro plane? Thanks in advance. I know it has the option for quad in aircraft type. Thank you.
Great vid, explained it really clearly
What's the reason for disconnecting the receiver?
Is this receiver compatible with an old dx6i transmitter?
Maybe explain how to bind RX's WITHOUT autobind?
Exactly what I was thinking.
Yep ....did anyone figure it out.
I have my spektrum receiver( spm4648) plug to my wizard ts215 and it fails to bind with my DX8, I was using this receiver in my conspiracy drone. Why it doesn{t bind with the wizard, any ideas?
Did you figure it out.... having the same problem
having some issues. got a brand spanking new drone. got it to bind. buuuut... the channels are messed up big time! my pitch stick is the only one that gives off input signals. but on 5-7 different channels. and no smooth motion.... been trying so many different things. and no matter what i look up. i cannot get it to work...
regardless.
a bit info:
using spektrum dx6 (yes i know you want to say i should change it damn trolls x'D but thats what i got, and my economy isn't what it used to. and had this for my fixed wings so thats what i need to work with)
got a SPM4649T reciever (also new, not updated. so as stock as i can have it)
and the drone it self is the UAVfutures 99$ inspired drone.
have tried the newest 3.5.7 aswell 3.5.6 firmware of betaflight on the FC (Racerstar StarF4S 30A) but it's all the same.
hope someone can help?
did you ever fix this issue? i have exactly the same issue (same transmitter and receiver)
Hi will spektrum receivers work with pnp race drones would love a response thx
life saver! thanks bro
What if my reciever blinks a bit slower and won't bind?
how do I reset a satellite receiver that was already bound previously? Is that possible?
I got the same receiver and it binds, however the channels fluctuates to much. wHAT COULD BE WRONG?
I am having trouble with channel mapping after updating to betaflight 3.2.2 on my piko blx. the roll and pitch are on the aux channels no matter what I do. I have changed the settings taer, aetr etc. please help. I am using a redcon rx
Thanks for this
Damn! I succesfully bound the reciever and transmitter, but cant see the stick movement in the reciever menu... Kill me
same did you find a solution HELP
@@ZShark216 Yes I yhink i did bt i cant remember. I'm on crossfire now
@@MatijaBuhMetaliero oh, dang. If you remember make sure to reply please!
Ben je nederlands? Zo nee ,the dsm2 receiver can connect to devo 7right ? Or dont you know annything from that receiver?
Theodore LengKong i was lucky that something else wsnt working so i had a refund luckely , i stept over to q x7 now. But thnks for replaying👍🏻
Theodore LengKong the only hard part for me was that i had a receiver with eu firmware and a transmitter withinternational firmware so had to flash the xsr receiver but connecting to it was kind of easy
Theodore LengKong but you have to look some vids on youtube so youre sure for wath youre doing
followed this video completely and the quad still wont bind. I'm convinced that this is the most difficult hobby anyone can become involved with.
I completely agree. I have a dx7s and learning the beta flight, spectrum receivers and other stuff is a challenge.
I cant figure this out for my dx6i using a 4651t, please help
does the LUX V2 support the bidirectional (rcLink & telemetryLink) protocol of the new SPM4649T Serial Telemetry Receiver? (using three wires)
I am having the same problem with my x racer f303 3.1, No stick response in beta Flight. Did you ever figure out how to solve the problem? Please respond! Please!
Can I bind to this RX with a DXE?
Thanks, Works.........
I still have no stick response in betaflight. It binded fine and changed all the settings but still no go.
any luck? I'm in the same boat. nothing shows up on screen " colored bars in beta flight" I have checked Rx ports. This happens with my baby hawk and my 90GT Kingkong.. Least I can fly my whoops without any problems.
Same problem with my two drones! Both my Vortex 250 Pro Ummagawd and a used drone with a Naze FC stopped working. Thought it could be my DX9... but my Inductrix Pro still works fine (and I haven't hooked it up to Betaflight recently). Was there a recent Betaflight update? I was running 3.2.1 when these problems occurred. So I downgraded to 3.1.3 hoping this would solve my problem of not seeing any stick inputs on Betaflight "Receiver" tab. No luck. Same problem. Getting upset... Please update/reply if any readers have a solution!
Thomas W. Brinkley me to
Anybody find a fix?
I really hate spektrum now. Been trying for hours to get my DSMX to go into bind mode via betaflight bc of course bind buttons aren't a thing. About sick of it. Might get a new radio/receiver.
Allways when i turn of and turn the drone on again it goes in to bind mode
This is a different method plus easiest to set up. Why do many others go into betaflight with rd range and input values there like min 1020 max 1880 then add those in cli to get close to 1000 and 1880 to get 1997. My brushed and brushless quads I never set but upped to 125 to get arming. Forgot that method since done one just copy and paste to new quads lol but my mid is around 1070 and max is around 1860 changing this according to your setup to see what I have been doing wrong lol
Alright I did this and my quad now flips like 5 times on a slow roll lol a slight fast bank and it wants to spin out of control. Before I thought my quad was on rails. Dunno what has happened.
Alright update my rates were and expo needed to be dialed way down with my endpoints at 1000 and 2000. My original end points seem more stable. Will keep it this way and get used to it. Thanks for this video
To bad I have a dxe..
11:58 vid just to bind a radio and rx???? anyone want to talk me into keeping this DX6i? sheesh...
No. Spektrum is shit!
More like 2 minutes to bind, the rest was BF setup. My DX6 has been dope, don't be a fool.
Does this receiver work with the Dxe ????
What the range with this setup only one Satellite. And can bu used a full range receiver insted the Satellite?