Very Good informative vedio sir , also plz mentions at what occasion we will replace suction valve and how do know that suction valve is having problem , thanq sir keep making such vedios to help everyone
Hi sir i have doubt ones we put in wrong way the sealing ring how to remove it back and put again. do we have any special tool or else simply use screwdriver to pull up
Actlly I also had the same view but the video didn't specify it hence wanted to clarify... If I am correct it is the pressure which pushes the seals and helps sealing surfaces
With respect please change the sealing ring up side down. Spring side of sealing ring must be placed on pressurised side. (Spring face according to cut off hole)
sir good day. pls make a video about how to do emergency steering from steering gear platform step by step. Sir no need to try out steering. just show us the steps will be OK. pls🙏
Thank you for making this video to help me understand how to disassemble and reassemble
welcum sir
Very Good informative vedio sir , also plz mentions at what occasion we will replace suction valve and how do know that suction valve is having problem , thanq sir keep making such vedios to help everyone
Wen the suction valve leaks.. Either you can find via telltale hole in some designs or else ur pcom will be reduced..
Second Sahib, very good informative videos, keep up the good work, of enlightenment.
Thanks for your good compliment sir... Keep supporting...
Thankyou very much for this informative video 🙏
🥰
Before putting sealing ring need to heatup by hot water?
It is advisable to keep in hot water so that fitting of seals will get more easier...
What should be the direction of the the seal spring? And do you need to heat it
No need to heat it as we use tool to install these seals...
Thanx a lot for usefull information!
So nice of you... Requesting you to share our channel with ur friends and subscribe
Hi sir i have doubt ones we put in wrong way the sealing ring how to remove it back and put again. do we have any special tool or else simply use screwdriver to pull up
If u put it wrong then we need to remove it, while removing seal will get damaged .so u need to renew it..
Thank you sir, this helps a lot
Glad it helped
Actlly I also had the same view but the video didn't specify it hence wanted to clarify... If I am correct it is the pressure which pushes the seals and helps sealing surfaces
Kindly make a video for Man b and w fuel pump overhaul sir
Vl do fur sure... Give some time
Tq sir Nandrigal❤
nandryyyy..
With respect please change the sealing ring up side down. Spring side of sealing ring must be placed on pressurised side. (Spring face according to cut off hole)
Thanks fur your good correction sir.. Keep supporting
sir good day.
pls make a video about how to do emergency steering from steering gear platform step by step.
Sir no need to try out steering. just show us the steps will be OK. pls🙏
Vl do for sure sir
.. Pls giv some time
Nice sir
welcum sir...
👌👌👌
🥰
👌👌👌👍👍
❤️
MAN B&W Fuel pump full overhaul
Vl do sir...pls giv some time