Tavor X95 Bolt Type B & FCG disassembly for cleaning. IWI IDF Bullpup
HTML-код
- Опубликовано: 28 авг 2024
- I won't lie, the assembly and disassembly of the "Type B" bolt assembly is very cumbersome so I don't know why it was not in the manual. They need to get rid of the bolt control bar/rod and redesign a firing pin, also replace the extractor plastic spring because I'm leery the organic material in place of a metal extractor spring will fail.
Addition: I now know why the disassembly of the X95 18.5" bolt was so cumbersome. It began when soldiers were damaging the recoil buffer so they added a triangular piece above the buffer to prevent the buffer from rising just before the buttplate closes. Unfortunately, that triangular piece made the recoil non removeable which in turn prevented the rod from sliding out easily, making the whole disassembly of the bolt very complicated. See Micro Full Monty near the end of the Video.
X95 18.5" full disassembly. • Tavor X95 Full Monty d...
X95 18.5" vs. Tar21. • X95 vs Tar-21. Review....
X95 Micro Surplus review. • X95 Micro Surplus MSW....
X95 Micro Full Monty. • Tavor X95 Micro Surplu...
Disclaimer: this video is for educational purposes only, free of charge. Any part you copied is at your own risk and should be inspected by a professional prior to use.
- Due to RUclips's policy. Please do NOT ask for link or post information of where to buy.
- Please do not attempt to do my disassembly because it's not made for novices who can't figure out what I'm doing on or off camera also quite often due to the length I don't reassemble or include the FCG which is done separately.
- If you like what I do on RUclips and you found some parts useful then please support my channel by pressing the LIKE and the subscribing buttons. If it was of no use to you then thanks for watching and please press next. Making videos are time consuming and not to mention expensive to do... Thank you.
After messing around with the manual and other RUclips vids for over an hour, I still couldn't get that pin out!! The mallet trick worked like a charm. Who knew that rod had to come out at least an inch & a half??!! Excellent vid, Thanks so much!
Glad I could help!
Excellent video, couldn't have done it without you.
Glad I could help
Your right, that is different. The TAR 21 and early X95’s firing pins come out the rear of the carrier if I remember. That’s funny how they don’t mention this in the manual, thanks for the vid!
ya welcome.
Thank you very much for this video. I was having a real hard time following the instructions from the manual which has not been updated and was still referring to the older model Tavor. It was frustrating not to be able to disassemble the carrier group and not knowing what I was doing wrong. I also find it useful to know how to disassemble the sear mechanism, just in case. Very well put together. You helped a great deal of people!
glad to help.
Thanks for the vid! I couldn’t get that guiding bar out far enough to pull the pin on the bolt, thought I was doing something wrong, and didn’t want to break anything! Gonna try again with your hammer technique.
dont you mean the mallet technique? lol.
just in case you didnt see it in my vid, i demo how to do it with a mallet.
Thank you for clarifying Type B bolt carrier. The IWI video must be showing Type A as it is different.
ya welcome
Went through several different videos to find the correct model. Thanks for your help!
Ya welcome. Glad to help.
I had to use a long punch to drive the bar back so I could remove the bold, it was and still is super tight
It's mean we just have to change selector and polymer chassis 😘
To have fun gun
No changing chassis, just the FCG
Thank you.
You're welcome!
Hey Gnutzguy I have a question for You on these X-95's, PLEASE. I missed up I guess and I had my X-95 was Cocked and I didn't notice it. It was empty. What I did was open up the butt stock to install a new item I got from Metacore Arms.The weapon was "COCKED" and I DIDN'T check it I opened up the Butt Pad and I noticed the Pressure was extra heavy when I was trying to hold the butt pad. Now I can't get it (the Firing mechizime) back in the butt of the X-95. I'm at a stand still and I've scratched the rest of my hair on my 0l' head....Any help would be really Appreicated. And, here is a Great Big Thank You for any help👍
Remove the mag first and check thru the ejection port the BHO is not stuck in the up position. Good luck.
Does the x95 still need a left hand bolt if I want to convert it just got mine 3 weeks ago and having trouble
yes, you do. you need a bolt that has the extractor on the left side.
What size of the punch for removal of the extractor pin ?
??? punch comes in a set, try what ever will fit the best.
How can I tell if I have a Type A of Type B?
depends on how you disassembly yours. the two are completely different. if you follow the manual then its type A . follow my vid then its type B.
Type A has slots at front of recoil spring, making it much easier to remove, type B is enclosed.
God thank youi was wondering why my pin on the mod 2 was so hard to take out i had the mod 1 so i was wondering what the fuck
lol, you made me laff... thanks
It's not disassembled. I've been directed to several of your videos and you are have never actually disassembled the bolt.
really? then what have i been doing for 27 min? lol
@@gnutzguy You were almost there when you pulled the piston off, I did it last night after calling iwi for further instruction. You can indeed remove and swap the recoil spring.
@@gnutzguy There is alot more that you can strip on the carrier and the last 2 pins you punched never should be removed, nor does the piston need to be separated from its seat.