Pro tip: When pressing bearings into a housing you must press against the outer race of the bearing. When installing a shaft through a bearing, you must support the bearing on the inner race. Otherwise you'll damage the ball bearings and the tracks they roll in.
4 штока от передних автомобильных стоек по углам, верхнюю плиту просверлить и закрепить гайками на резьбу на штоках... Думаю, будет крепче и ход ровнее.
Great idea, Though the jack need not be bolted to the base. An outer boundary of small bolts can be done at the base plate to fix it at one position. The jack can then be removed and used for other purposes as well. The slider assembly shall be independent of the jack. Jacks of suitable power can be inserted for varying requirements. Some kind of horizontal stabilization is also required while working the jack handle. My motto- A general purpose tool for multiple usage, rather than a tool fixated and enslaved to single usage..
@@larryd9753 well, that's going to stretch your budget a lot. A 10 ton jack costs around $500 here in India. Add to that the much stronger support structure required. I think this will take me anywhere near $750. Amplify that suitably for your country.
This is a "5 ton mini hydraulic" press. I like your project, I have a 10 ton hydraulic jack. I will adjust accordingly on my mini "10" ton hydralic press. Thank you.
Не делайте так, как этот мастер. Направляющие данного устройства не выдерживают ни какой крмтики. Выполненные из трубы, они элементарно не выдержат максимального давления домкрата, а результатом будет "выстрел" и разлет составляющих пресса.
Fabulous job.Thinking thay everytime you need to use hydraulic press to replace some parts in your cars suspension ,you pay so much money for all working hours of mechanic,parts and all what you could do I'm afternoon urself in your garage or sheed,kitchen having that self-made tool..Love it
Brilliant! Need to add extensions to the front base so it won't tip while jacking, extensions can have holes for securing it to work bench too, Still brilliant.
As guides they are likely to work great but I would ad the thickest all-thread I could fit through those pipes and just ad a plywood base to make room for the bottom nuts as I doubt those pipe threads will take more than 1 ton let alone 5...
I'm.surprised there was no drilling Orr tapping lube used. The top plate and the bottom plate should have been made from 4x2 heavy wall channel. The pillars should have been inserted through the channel and held in position with a nut on each side.
Концепция прикольная. Но.... во первых болты м6 против домкрата, это по конструкции) во вторых, прессовать подшипник, при этом давить оправкой на сепаратор) а затем прессовать вал при этом подложить оправку на корпус подшипника)))) забил бы молотком, тот же эффект был бы))))
Nicely done, good for small projects. However, like someone here said before me, you ruined that bearing. Never apply pressure without support exactly on the opposite side. When you press in the axle or the gear on... The bearing is toast or will be very soon. Still, cool home press.
Pro tip: When pressing bearings into a housing you must press against the outer race of the bearing. When installing a shaft through a bearing, you must support the bearing on the inner race. Otherwise you'll damage the ball bearings and the tracks they roll in.
Looks like he did to me at 8.15
I don't understand why the drill bits he used on the metal don't produce smoke, and he didn't use lubricant.
Very good job. 👍💪
Very nice vedeo👍👍
4 штока от передних автомобильных стоек по углам, верхнюю плиту просверлить и закрепить гайками на резьбу на штоках... Думаю, будет крепче и ход ровнее.
Идея хорошая, но только мелочевка прессовать, а так малецшая не ровность и на перекос пойдёт, так как 2 оси а не 4.
Excelente herramienta, me gustó, presente cordial saludo desde Navojoa Sonora México
Great idea,
Though the jack need not be bolted to the base. An outer boundary of small bolts can be done at the base plate to fix it at one position. The jack can then be removed and used for other purposes as well.
The slider assembly shall be independent of the jack. Jacks of suitable power can be inserted for varying requirements.
Some kind of horizontal stabilization is also required while working the jack handle.
My motto- A general purpose tool for multiple usage, rather than a tool fixated and enslaved to single usage..
@@larryd9753 You have to specify the area of plates to get pressure values. 12 tonnes is a force or weight value.
@@larryd9753 How much pressure do you want- in N/sq m or kg/ sq m
@@larryd9753 well, that's going to stretch your budget a lot. A 10 ton jack costs around $500 here in India. Add to that the much stronger support structure required. I think this will take me anywhere near $750. Amplify that suitably for your country.
@@larryd9753 seems my estimate was way off. Best of luck for your project.
Buenos días excelente prensa gracias adiós por enseñar saludo y muchas bendiciones 🙏 que dios te bendiga hermano
ВЕРХНЮЮ ПЛАСТИНУ НУЖНО КРЕПИТЬ ДВУМЯ МОЩНЫМИ БОЛТАМИ ЭТИ ВЫРВАТЬСЯ КЧЁРТОВОЙ МАТЕРИ
good idea but I highly doubt those top threads will take 5 tons.
I doubt it also
It would be really helpful if you list the item you used in the video ....let it be in description
This is a "5 ton mini hydraulic" press. I like your project, I have a 10 ton hydraulic jack. I will adjust accordingly on my mini "10" ton hydralic press. Thank you.
Не делайте так, как этот мастер. Направляющие данного устройства не выдерживают ни какой крмтики. Выполненные из трубы, они элементарно не выдержат максимального давления домкрата, а результатом будет "выстрел" и разлет составляющих пресса.
Very nice,you are improving
Fantastico professor gostei nota 10
Этим только подшипники в часах менять больше они не выдержат
Very beautiful 👌👏👏
thanks man u not add stupid music! i really enjoy it
Very nice sir simple & easy Thank you very much
excelent work 🥰🥰🥰
bravo Mistry MakeTool
Fabulous job.Thinking thay everytime you need to use hydraulic press to replace some parts in your cars suspension ,you pay so much money for all working hours of mechanic,parts and all what you could do I'm afternoon urself in your garage or sheed,kitchen having that self-made tool..Love it
I would like to know the measurements of this job so please mention the measurements if you can I will be great ful to you
Отличный станочек молодец
InstaBlaster...
Those 4 bolts catching the top plate are holding to 5 ton force, wow...
GroovyDrifter I wondered about that too. I think the bottle jack is probably 5 ton rated but the applications he used it for are probably not.
Weld for more stregnth
Simple and it works, love it. Thank you for the idea.
That's amazing! It's so beautiful!
Hallo ein schönes Video und ein super Werkzeug 👍👍👍👍Mit freundlichen Grüßen aus Deutschland 🇩🇪 👋👋👋Kai
Un nouvelle abonné de France, un grand bravo
Very good video , Simple and effective.
Amen from Cape Town South Africa
Excellent idea.very good
Toll, souveräne Arbeit . Einfach und effektiv.🛠👏👏👏👍🤗
..
на поджимающей плите можно сделать по середине разметку в виде нескольких окружностей и осей для удобства позиционирования деталей
What type metal did you use to make the plates. Looks that is soft metal
A shot in the dark , a big question mark, in history. Is it a mystery, to me.
How thick is the plate steel that you used on your press? Thank you . Dave
Если бы можно было поставить 1000 лайков👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
You are brilliant sir
Отличная идея. Молодец. Себе так же сделаю. 👍👍👍
Brilliant! Need to add extensions to the front base so it won't tip while jacking, extensions can have holes for securing it to work bench too, Still brilliant.
Excelente vídeo, muy clara la explicación...éxito y bendiciones...y sigo al tanto de lo nuevo
Simple and good design
Turned out nice!
Excelente Dios te bendiga por compartir tus conocimientos
hello, did you use 1/2 inch pipe? thank you
Always enjoy wathing your projects :*
it turned out very well! What material is it made of and can you throw off the dimensions in more detail?
this is an acendent press its very cool
Fantastic 👌
Very nice and simple
Colombia mil gracias por su información por compartir sus conocimientos escuchar opiniones profesionales éxitos amigos.............
Good idea 💡 you
very good , very top. dank you
Thanks are you😎😄
Please show us how to assemble jack used in this vedio.Thanks for or vedios
Just put a magnet near the drill and tap areas.
Parabéns muito útil essa ferramenta, parabéns pela invenção
Projeto top, parabéns!
Yes u can ! Very good
ola vc e simplesmente incrivel , PARABENS
Cara, tú é fera!
Very nice project...
Sir, do you make and sell this type of press?
Nice idea
Super. Super. Thank you very much brother
Careful with those cast flanges guys - they explode apart like a frag grenade (don’t ask me how I know).
How? 😁
😅
parabéns fantástica a sua invenção
um abraço ( BRASIL )
Muito bom obrigado
Amazing uncle
simple et efficace jolie en plus
Very good try
As guides they are likely to work great but I would ad the thickest all-thread I could fit through those pipes and just ad a plywood base to make room for the bottom nuts as I doubt those pipe threads will take more than 1 ton let alone 5...
Just use round bar instead of threaded rod... cheaper. Use a die to cut your own threads on top and bottom as needed.
muito bom parabéns!!
Bhai aap ye sell nahi krte kyaa, ager available h to btao na. Kya price padega
Верхняя упорная плита держится 4 болтами, такой пресс для часового мастера.
Bom ótimo vídeo adorei obrigado pela aula
aisa machine truck me fit ho sakta hai kya please reply kare please sir
SO AMAZING
Please use cutting oil ?!
Bisa untuk pres stang motor itu mas
I'm.surprised there was no drilling Orr tapping lube used. The top plate and the bottom plate should have been made from 4x2 heavy wall channel. The pillars should have been inserted through the channel and held in position with a nut on each side.
J bonnell I think you are right. With the patch suggested
I’d feel much more confident. Anyway it’s a good job.
Good job bro
Exelente gran calidad de trabajo
Nice job man
Концепция прикольная. Но.... во первых болты м6 против домкрата, это по конструкции) во вторых, прессовать подшипник, при этом давить оправкой на сепаратор) а затем прессовать вал при этом подложить оправку на корпус подшипника)))) забил бы молотком, тот же эффект был бы))))
Nicely done, good for small projects. However, like someone here said before me, you ruined that bearing. Never apply pressure without support exactly on the opposite side. When you press in the axle or the gear on... The bearing is toast or will be very soon. Still, cool home press.
Thanksyou v much for these genius ideas
No coolant when drilling????
Hi could I get a spec list of materials mainly the metal plate thickness and size this is exactly what I need and making at moment
Pls give the material list , so kind of you.
Is this not on your website for full measurements etc?? Thanks
Thanks for sharing that
very good.
It's very nice.
BUEN TRABAJO
A wonderful job
Hi . Good work
I would like to see links about the springs .. and both first things who you fixed .they are 4 actually..
2 more later
Simplemente,,, chingón,,, saludos desde México
Very cool, and really nice job! Thanks for sharing!
Subbed as I'd like to see what else you can make.
Buenas ideas saludos cordiales
Bhai aap hmyn bna dyn gy hm aapko payment krdety hn???
BUENA LA PRENSA
ASI NO SE EMPUJAN LOS RODAMIENTOS NI LOS EJES