ups just an idea. Can it be possible to run 4 turbos with 2 left spinning and 2 right spinning. Allowing the water and not just the angle to move the dirt in a fixed direction? Maybe a competitor to your fanzy blue one?
If you ran 4 nozzles like that they would have to be small. In fact pa or suttner turbos only go down to a size 030 meaning running 4 would equate to massive orifice and you would have low pressure, they would also be heavy. Not all machines are even capable of running the twin nozzle lance due to low pressure.
Hi Phil great video as usual. Just a question about the Dosatron. How do you clean your’s after use? Do you rinse it out and how? I have bought one and hoped to get some tips from you on best practices when using it 😁. Love to see a new video off your new van set up sometime. 👍
Cheers Phil I have been using a bucket with fresh water then drawing it up at 50% just wondered if I was doing it right. Thanks for the help your videos have been a great help to me when I started my business in March. 👊🏻👊🏻
@@christophercunningham856 50%? the dosatron does 25% max or 1of4 (3:1) rinse through with fresh water and it's good. Will just need priming again next time you use it.
😂 I need to read the instructions to learn my ratios The 2 jobs I have used it on I have been using it at 25% then then screwing it half way down to draw up fresh water to clean thinking that was 50%🙄and drawing up more water. Time for new glasses and some reading. Cheers 👍
@@christophercunningham856 no 25% is the strongest mix, so that will draw up the quickest. If you wind the mixer down that will weaken the mix and thereby draw up less. I also have the bypass valve on mine which you can flick on and it will bypass the mixing and just push through fresh water.
Maaan so many questions! Have you tried 35% Hydrogen percarbonate insted of the hypo? In my country I will be able to buy that for cheap compared. It is delivered via laundrymat companies.
Never heard of hydrogen percarbonate. I've used sodium percarbonate (laundry oxy powder) but it's very hard to mix without really hot water and because its not a biocide it won't kill algae or fungal spores. It also leaves a big powdery mess behind if it's not rinsed really well.
@@Nillersoon40 all I know is hydrogen peroxide is usually used for bleaching hair lol. I dont tend to mess with other chems as you never know on their compatability with water or sewage/drainage. Sodium hypochlorite is not deemed harmful as it dilutes so quickly. I mean you chuck the stuff down ya bog so it can't be that bad.
Don't really need to mask with the low dilution but the surfactant does mask it to an extent. When using strong doses I sometimes add a flavour to the drum.
No not retired, to be honest if the jobs right I will use it. They are bloody expensive and the service kits are pricey at around £270 a throw. It seems to eat bearings if not stripped and greased every season. Had to replace them at the beginning of the year as they had broken up.
Really nice job Phil I've had a few like that too
You see a nice central drain and think result, then after 15mins you realisebits either blocked or a soak away. It did drain eventually so all good.
that twin turbo lance is mental!!
Does cut through the weeds. Works better with these PA nozzles over the std suttners.
How much price please sir. one piece
@@suriyak5570 I don't sell them.
ups just an idea. Can it be possible to run 4 turbos with 2 left spinning and 2 right spinning. Allowing the water and not just the angle to move the dirt in a fixed direction? Maybe a competitor to your fanzy blue one?
If you ran 4 nozzles like that they would have to be small. In fact pa or suttner turbos only go down to a size 030 meaning running 4 would equate to massive orifice and you would have low pressure, they would also be heavy. Not all machines are even capable of running the twin nozzle lance due to low pressure.
Hi Phil great video as usual. Just a question about the Dosatron. How do you clean your’s after use? Do you rinse it out and how? I have bought one and hoped to get some tips from you on best practices when using it 😁. Love to see a new video off your new van set up sometime. 👍
Yeah I rinse it through with fresh water. I have an old hypo drum that I cut. I fill it with water and rinse the unit through after use.
Cheers Phil I have been using a bucket with fresh water then drawing it up at 50% just wondered if I was doing it right. Thanks for the help your videos have been a great help to me when I started my business in March. 👊🏻👊🏻
@@christophercunningham856 50%? the dosatron does 25% max or 1of4 (3:1) rinse through with fresh water and it's good. Will just need priming again next time you use it.
😂 I need to read the instructions to learn my ratios The 2 jobs I have used it on I have been using it at 25% then then screwing it half way down to draw up fresh water to clean thinking that was 50%🙄and drawing up more water. Time for new glasses and some reading. Cheers 👍
@@christophercunningham856 no 25% is the strongest mix, so that will draw up the quickest. If you wind the mixer down that will weaken the mix and thereby draw up less. I also have the bypass valve on mine which you can flick on and it will bypass the mixing and just push through fresh water.
Is your pointspeed broken? or why do you use these double turbo nozzle now?
Just showing different tools. The pointspeed is still going 💪
Hi Phil.
What do you do for winter work? I guess water cleaning stops with the frost?
Yeah goes dead after around October. Put me feet up and wait for spring.
@@DirtyDriveAway nice but here in Denmark you will be hard pressed to earn the money to have a 4-5 month vacation lol!
What's up with the falch ? Noticed you haven't used it in your latest vlogs..
No the falch is still around. Just like trying different tools in me vids. I rarely used the twin turbo and people do ask about it.
Maaan so many questions! Have you tried 35% Hydrogen percarbonate insted of the hypo? In my country I will be able to buy that for cheap compared. It is delivered via laundrymat companies.
Never heard of hydrogen percarbonate. I've used sodium percarbonate (laundry oxy powder) but it's very hard to mix without really hot water and because its not a biocide it won't kill algae or fungal spores. It also leaves a big powdery mess behind if it's not rinsed really well.
@@DirtyDriveAway silly me it was hydrogen peroxide H2O2. All this chemistry is a bit confusing.
@@Nillersoon40 all I know is hydrogen peroxide is usually used for bleaching hair lol. I dont tend to mess with other chems as you never know on their compatability with water or sewage/drainage. Sodium hypochlorite is not deemed harmful as it dilutes so quickly. I mean you chuck the stuff down ya bog so it can't be that bad.
Great good Phil. I was a bit disappointed hopping to see the daddy falch Do u mask the sh smell wiv anything
Don't really need to mask with the low dilution but the surfactant does mask it to an extent. When using strong doses I sometimes add a flavour to the drum.
How long did this driveway take Phil?
Looked an awkward job!
Yeah was a bit, probably took 2.5hrs all in. Should have taken me about an hour.
Why didn't you use the falch nozzle?
Just showing different tools.
You retired the falch nozzle Phil ?
Exactly what I was wanting too know 😂😂😂
At £1500 hope it was worth the coin.. was seriously considering getting one
No not retired, to be honest if the jobs right I will use it. They are bloody expensive and the service kits are pricey at around £270 a throw. It seems to eat bearings if not stripped and greased every season. Had to replace them at the beginning of the year as they had broken up.
@@DirtyDriveAway what size nozzles are running atm they look big ones
@@williammcallister3336 they are PA turbo nozzles. After trying Suttner ones I find these ones much better. They run 2x035 nozzles.