Awesome video! I was so frustrated with trying to pry out the small bulbs (for my Camry's maplights) with my fingers that I almost gave up. Then I found your video and tried your tape suggestion. Worked like a charm! Subscribed!!
Finally got around to installing the blue version of these interior LED bulbs in the camry have to say it looks way better than the halogen very simple to install. Great video!
That tape method was so clutch lol I was struggling before I seen this, anyways got all my lights swapped out and it’s looking super clean on my new Avalon 💯
This video is extremely well, done with good details about the removal and reinstallation of lenses and bulbs. I ran into a slight problem reinstalling my map light lens, but after looking at the video a 2 nd time, I figured out my error. It's crucial the lens is lined up properly to hit the striker. Thank you for the great video.
I been looking to swap out all the halogen lights for LED style in my 2012 camry xle, glad to have stumbled upon this video as it was very helpful and to the point so now I just placed my order on your website, getting my car ready for summer 2017.
great video. You go into a lot of detail other people might consider common sense and leave out. But its great for beginners. which is the point im assuming cuz experts arent gonna be on youtube watching this video. Good work man. Very helpful.
Best instructional! For door courtesy lights, "start with the door side?" the light is on the door. Do you need to add a correction to say pry off the cover on the front or the rear side of the lens first ? Whatever things worked eventually for me without causing damage. Are the back up bulbs the same as the door, ,trunk and map lights?. Thank you.
Thank you for the feedback! The headlight installation process is very simple, and you can find the LED headlight product here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html
I just bought a 2014 5 pre-owned Camry and just realized that there are no lights underneath the dashboard. But definitely want these type of interior lighting
hello I was wondering when installing this interior light product, should I know of any precautions so I dont blow a fuse? For example, disconnecting the battery? Please let me know! This product looks amazing.
Thank you for your interest. No, it would not be necessary to disconnect the battery. As long as your vehicle's battery is performing efficiently enough to properly run the LED system, as well as any other electronics in your vehicle, then you do not have to worry about blowing a fuse.
Thanks for really detailed video! Is there anyway I can replace trunk light without ripping out the trunk? I'm a bit nervous to be honest. And also, is there any way I can change vanity light too? I have 17 Camry xle
Thank you for your interest. As shown in the video, the trunk installation is very simple, and you do not have to rip anything out of the trunk. Also, it is likely your vanity mirror lights are stock LED, which you cannot swap as they are soldiered to a chip and board.
Hey so I own a 2012 Camry SE but the back dome light is not the same as the one in this video. I want to order one of your kits from your website but was wondering if everything would turn out fine. My back seat cabin lights are the same style as the front lights, map lights. Instead of one housing for the light there’s two separate housing just like the front. Is there any possible way you can help me out so that I may continue with the purchase? Thanks again!
Thank you for the heads up. If you could please send us over a photo of your back dome light for reference, we can ensure you will be shipped the correct lights. You can email us at help@precisionled.com.
Yes, the headlight kit is designed to fit into your stock housing. There are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye. Also, yes, our kit will increase your nighttime driving visibility by 2-3x.
You can find here headlight kit for your 2017 Camry SE here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html And the interior kit here: www.precisionled.com/toyota-camry-premium-led-interior-lights-kits-2012-present.html
Thank you for your interest. The installation process would be very similar to as shown in the video. However, you would install this kit: www.precisionled.com/toyota-camry-premium-led-interior-lights-kits-2007-2011.html
Thank you for your interest. If you were looking to match the installation as shown in the video, you would install the kit in the description as well as all of the added options.
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
Thank you for the interest. No, the reverse lights would only change the lights when reversing. The turn signals are on a completely separate and independent bulb.
You can probably just pinch the ends back into place so that the bulb will be a tighter fit and not come loose. If you'd like to send us a picture for a suggestion please feel free to reach out to us at help@precisionled.com!
You have to install the tabs with some separation between the base and the center of the tabs. Then once the pin is inserted into the vehicle, you can press the center portion of the tab to lock it into place.
Im having trouble replacing the license plate bulbs. I cant seem to remove the plastic cover to take out the bulb. Everything else ive replaced just like the video. Any help from anyone please?? Thanks.
I do believe the sun visor lights would be stock LEDs, which you cannot swap as they would be soldered to a chip and board. This is why it is not shown in the video.
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
Thank you for your interest. We will keep an eye our for another Camry out here in Los Angles to shoot a glove compartment video. Subscribe for updates!
I ordered one for my glove compartment after it arrived I realized that there is no light source in there, but finally got around to hooking up the the entire interior with blue LED lights.
Thank you for your interest. Yes, we do have listed the 2018 installation would be very similar, if not identical to as shown in the video. The products listed in the description would be compatible as well.
Thank you for your interest in PrecisionLED products. Yes, we do ship all over the world, including to Canada. We have a shipping flat rate to Canada for 24.99 USD.
We sell our very own PLED brand headlamps. The CREE Headlight kit is 139.99, and here is a direct product link: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
Have you checked to ensure you did not blow a fuse? Did you purchase your LEDs from us? If so, please contact our support team directly at help@precisionled.com.
The 2018 installation would be very similar, if not identical to as shown in the video. The products listed in the description would be compatible as well. Hope that helps!
Awesome video! I was so frustrated with trying to pry out the small bulbs (for my Camry's maplights) with my fingers that I almost gave up. Then I found your video and tried your tape suggestion. Worked like a charm! Subscribed!!
Glad to hear you found the video useful and thank you for subscribing!
Awesome video! Everything worked liked a charm and the tape idea is ingenious
Neil Patel what’s ingenious mean
Glad we could help!
As always, clear and thorough description & demo. Nice job!
Thanks for the feedback!
Finally got around to installing the blue version of these interior LED bulbs in the camry have to say it looks way better than the halogen very simple to install. Great video!
Thanks for tuning in!
Great video. I wish I had found this when I was replacing my lights. I remember watching several different videos for them. 🤣
Thanks for tuning in!
I really was having i hard time taking the bult of the map light department until i saw your video the tape worked like a charm thank you
Glad to hear, thanks for watching!
That tape method was so clutch lol I was struggling before I seen this, anyways got all my lights swapped out and it’s looking super clean on my new Avalon 💯
Thanks for the support!
This video is extremely well, done with good details about the removal and reinstallation of lenses and bulbs. I ran into a slight problem reinstalling my map light lens, but after looking at the video a 2 nd time, I figured out my error. It's crucial the lens is lined up properly to hit the striker. Thank you for the great video.
This video really helped me. Just bought some interior lights & installed them with this video.
Where did you get them to buy ?
Happy to hear that. Thanks for watching!
Awesome video, straight to the point.
Thank you for watching!
Thank for the Video! I was going about my reverse lights all wrong. IOU
Thanks for watching!
The best advise ever, with the scotch tape haha. Used it and worked perfectly!
Glad to hear it helped!
I been looking to swap out all the halogen lights for LED style in my 2012 camry xle, glad to have stumbled upon this video as it was very helpful and to the point so now I just placed my order on your website, getting my car ready for summer 2017.
Glad to hear, thanks for the support!
Your the only person that I can find that made it simple and easy. Thanks!
Thank you for watching!
BRO THANK YOU! VERY CLEAR HOW TO STEPS! - 2017 Camry SE
Thank you for watching!
I just purchased a Toyota Camry 2015 SE. Thank you for making this great video!
Thank you for watching!
How about the Glove box light?
We didn't get to the glove box light, but we will try to film an updated installation video when we come across another 5th gen Camry!
great video. You go into a lot of detail other people might consider common sense and leave out. But its great for beginners. which is the point im assuming cuz experts arent gonna be on youtube watching this video. Good work man. Very helpful.
We are happy to help!
Phil, thank you for making this video sooooooooooo simplistic that why I'm buying the kit!
Thank you for watching and for your support!
Thanks for the taping tech!
No problem, glad to hear it helped!
Best instructional!
For door courtesy lights, "start with the door side?" the light is on the door. Do you need to add a correction to say pry off the cover on the front or the rear side of the lens first ?
Whatever things worked eventually for me without causing damage.
Are the back up bulbs the same as the door, ,trunk and map lights?.
Thank you.
this is an excellent video!! just changed all my lights to LEDs for my 16 camry...looking into next my headlights
Thank you for the feedback! The headlight installation process is very simple, and you can find the LED headlight product here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html
PrecisionLED
Thank you! Perfect explanation
Thank you so much. We really appreciate the positive feedback!
You can also put those size LEDs on the reverse light. 👍
Thanks for the info!
I'm gonna try to replace my broken license plate lights with LED myself & maybe i'll do interior as well
Thank you man
I just did replace them with LED & i gotta say, they weren't as easy as replacing my gear shifter light ^^
We are glad to be of assistance! Feel free to contact us if you have any questions or concerns.
Wish I would’ve seen this before ripping out that aluminum part in the map light
thanks so much, this video show very clear pictures and instructions , rate you A+
Thank you for the positive feedback!
Looks like most of the bulbs are just using the t10 bulb replacement?
What is a sunroof light. I see that option when choosing lights on your website
Отлично спасибо познательно..))
Ассаламагалейкум из Казахстана..)
thank you for this video. helped me out so much
Thank you for tuning in!
Are the stop lights LED aswell? And did you installed them? Thank you. Your video help greatly.
Thank you for your interest. We do not sell brake LEDs, as they would hyper flash when ignited. Thanks for the feedback!
PrecisionLED then make some resistors then , duuuuuh
@@mikexcanxjerk Lol, we are working on a solution!
GREAT HELPFUL... THANKS!!!
큰 도움이 되었어요. 감사합니다.
시청해주셔서 진심으로 감사합니다!
I just bought a 2014 5 pre-owned Camry and just realized that there are no lights underneath the dashboard. But definitely want these type of interior lighting
Hope you were able to try it out!
My dude you’re rock
Glad to help!
Thank you!
Thank you for watching!
Question, are these the Crystal White LEDs or the Cool White LEDs?? I'm about to order mine!
Thank you for the interest. The LEDs installed on the vehicle are the 6000K crystal white color temperature.
It’s posible to get by amazon?
How can I get the light bulb
glove box light???
What is the dome light size? I know the door courtesy lights are “194.” What is the dome light model #? Thanks!
The dome would require a 29mm LED fitment, which you can find here: www.precisionled.com/premium-festoon-29mm-canbus-3smd-5730-led.html
hello I was wondering when installing this interior light product, should I know of any precautions so I dont blow a fuse? For example, disconnecting the battery? Please let me know! This product looks amazing.
Thank you for your interest. No, it would not be necessary to disconnect the battery. As long as your vehicle's battery is performing efficiently enough to properly run the LED system, as well as any other electronics in your vehicle, then you do not have to worry about blowing a fuse.
is there any led switchback available for this model 2015 camry se?
Were the bulbs installed here "crystal white" or "cool white" ??
Hi! Thanks for tuning in! In this video we installed the 6000k crystal white color temperature.
@@PrecisionLED That would’ve been my guess, great video thank you for the speedy reply! I’ll be placing an order tomorrow. 😁
Thanks for really detailed video! Is there anyway I can replace trunk light without ripping out the trunk? I'm a bit nervous to be honest. And also, is there any way I can change vanity light too? I have 17 Camry xle
Thank you for your interest. As shown in the video, the trunk installation is very simple, and you do not have to rip anything out of the trunk. Also, it is likely your vanity mirror lights are stock LED, which you cannot swap as they are soldiered to a chip and board.
thank you, thanks to this vid I was able to change out the lights on my 2016 camry, Wil you ever do a amp and sub in stall?
Hi! Most of our videos involve installing LEDs, so probably not. Thank so much for watching!
Hey so I own a 2012 Camry SE but the back dome light is not the same as the one in this video. I want to order one of your kits from your website but was wondering if everything would turn out fine. My back seat cabin lights are the same style as the front lights, map lights. Instead of one housing for the light there’s two separate housing just like the front. Is there any possible way you can help me out so that I may continue with the purchase? Thanks again!
Thank you for the heads up. If you could please send us over a photo of your back dome light for reference, we can ensure you will be shipped the correct lights. You can email us at help@precisionled.com.
Can i use the same led small lights for rear light or it's a diff bulb?
Different - T15 bulb
For the reverse lights we used a T10 bulb, which you can find here: www.precisionled.com/premium-t10-canbus-10smd-5730-led.html
Is it okay in stock housing,does it not be too bright and blind drivers,does it not need adjusting,and does it improve visibility.
Yes, the headlight kit is designed to fit into your stock housing. There are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye.
Also, yes, our kit will increase your nighttime driving visibility by 2-3x.
Does it compatiable with Toyota camry SE 2017 interior and headlight LED ? if yes I need a link direct to the product. Great guide . Thank you!
You can find here headlight kit for your 2017 Camry SE here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
And the interior kit here: www.precisionled.com/toyota-camry-premium-led-interior-lights-kits-2012-present.html
hey great video I was wondering does this led lights work with 09 camry LE.
Thank you for your interest. The installation process would be very similar to as shown in the video. However, you would install this kit: www.precisionled.com/toyota-camry-premium-led-interior-lights-kits-2007-2011.html
The direct link you have does it include all the led light bulbs you have here on the video? I see 2 front map, domb and 2 courtesy only? Plz help
Thank you for your interest. If you were looking to match the installation as shown in the video, you would install the kit in the description as well as all of the added options.
great video. I have a 17 camry xse is the license plate led to bright and glare the back up camera on the screen? thank Alex from NYC
No, we have not heard of any issues with glare!
Whats the difference between the two links "standard" and "premium" ? Are they both LED?
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
Does the reverse lights also change the rear turn signals?
Thank you for the interest. No, the reverse lights would only change the lights when reversing. The turn signals are on a completely separate and independent bulb.
is this installation using the crystal white 6000k or the cool white 8000k?
For this installation the 6000K crystal white color was installed.
Any LED for Camry 1995 for INSIDE in our Programm ? Dashboard and Other ....You send it to Europe ?
Unfortunately we do not carry dashboard LEDs. We do ship to Europe! Check us out at www.precisionled.com!
@@PrecisionLED Thanks for andere..Ship to Europe is great ,OK i Check the Website
What is the different between the standard one and the premium?
This video explains the differences: ruclips.net/video/eES-rxFew00/видео.html
Hope that helps!
"Wrap the bulb around the tape"
Nice catch 👍
Oops 🤣😂
I accidentally twisted on the bulb instead on pulling on the map light. Then inside came loose any way to fix it?
You can probably just pinch the ends back into place so that the bulb will be a tighter fit and not come loose. If you'd like to send us a picture for a suggestion please feel free to reach out to us at help@precisionled.com!
Are the LEDs in the video the standard or the premium?
Hi! We used our premium LEDs in the video.
Can’t get the tabs to go back in to the liner. Any suggestions? Am I suposoe to force it back it? I don’t want to break it
You have to install the tabs with some separation between the base and the center of the tabs. Then once the pin is inserted into the vehicle, you can press the center portion of the tab to lock it into place.
PrecisionLED I got it thanks a lot
Globe light box, where do I get the tools you use in your video?, tks
You can find our trim took kit here: www.precisionled.com/trim-tool.html
which bulbs are you using on your headlights??
Check out our headlight install video, it should be linked in the description box! ruclips.net/video/98ashXdASx8/видео.html
Can you pull a same video on a 2011 Toyota Camry SE....or can I send my car over to you
Thank you for your interest. The installation shown in the video should be identical for your 2011 Camry SE.
What size bulb was the courtesy door light?
The courtesy door would use the T10 bulb type, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Im having trouble replacing the license plate bulbs. I cant seem to remove the plastic cover to take out the bulb. Everything else ive replaced just like the video. Any help from anyone please?? Thanks.
As you can see in the video, we used a flathead screwdriver to pry them out. Please reference 10:48 in the video.
hey there, just wondering how many millimetres is the dome light? thanks waiting for your reply
The dome light would use a 29mm LED fitment.
thank you soo much! how do I remove the sun visor light cover? thanks waiting for your reply
I do believe the sun visor lights would be stock LEDs, which you cannot swap as they would be soldered to a chip and board. This is why it is not shown in the video.
There are two links. One standard and one premium whats the difference?
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
Can you add a light to the glove compartment?
Thank you for your interest. We will keep an eye our for another Camry out here in Los Angles to shoot a glove compartment video. Subscribe for updates!
I ordered one for my glove compartment after it arrived I realized that there is no light source in there, but finally got around to hooking up the the entire interior with blue LED lights.
do u guys sell led? i have a 16 camry i wanna do all lights led just like your video
We sell all of the lights installed in the video. You can find the links in the description box!
what size is the festoon light? 29mm or 31mm
Thank you for your interest. If you are referring to the dome LED, it would be a 31mm festoon.
Does it work for 2018 Camry?
Thank you for your interest. Yes, we do have listed the 2018 installation would be very similar, if not identical to as shown in the video. The products listed in the description would be compatible as well.
do you guys ship to Canada?
Thank you for your interest in PrecisionLED products. Yes, we do ship all over the world, including to Canada. We have a shipping flat rate to Canada for 24.99 USD.
Any helps or ideas??
If you need additional help with installing our LEDs please feel free to contact us at help@precisionled.com!
What brand and price was it for headlights
We sell our very own PLED brand headlamps. The CREE Headlight kit is 139.99, and here is a direct product link: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
jesus christ, ENTIRELY TOOO BRIGHT!
Lol. If you feel that way, you can always opt to install our standard LEDs, which are not as bright!
I put the dome light in but it doesn't work what am I doing r
wrong?
Have you checked to ensure you did not blow a fuse? Did you purchase your LEDs from us? If so, please contact our support team directly at help@precisionled.com.
are these dual beam?
Interior lights are never dual beam. Dual beam lights are for headlights, which mean the high and low beam are projected from the same bulb.
How about 2018 camry
The 2018 installation would be very similar, if not identical to as shown in the video. The products listed in the description would be compatible as well. Hope that helps!
I can’t get the damn clear cover off the license plate housing
Try using a tool such as a flathead to wedge between the plastic and the housing.
Is it 6000K or 8000K in this video?
In this video we used 6000k. Thanks for asking!
You're going to wrap the bulb around the tape??? You mean, wrap tape around the bulb! 😂😂😂 2:15 minutes in.
😂😂🤣🤣