The Upgraded 6.0 Intercooler Showdown
HTML-код
- Опубликовано: 29 авг 2024
- In this video, Charlie is going over the pros and cons of going to an aftermarket intercooler. Whether you are looking for a little bit more performance or just after replacing your intercooler with blown out end tanks, the KC Intercooler for your 6.0 Powerstroke is a great option. With a dyno proven gain of 11RWHP & 30 FT/LBs of torque, the KC Intercooler is a great option for your daily driven tow rig or even purpose built race truck since these intercoolers are tested to withstand over 120psi of boost!
For more information on the intercooler featured in this video, click HERE: tr.ee/KiWBpv01vB
-------------------------------------------------------------------------------------------------------------------------
Subscribe to @KCTURBOS
Check out all of our products: tr.ee/cWIsf7eVwf
Get your KC Apparel HERE: tr.ee/4latFTnSxb
Facebook: tr.ee/U6oaPwz_Xz
Instagram:
TikTok: tr.ee/iXRBVWUtaD
Twitter: tr.ee/KnWktnwCD4
Nice video Charlie! The tech data is unmatched. The most underrated and forgotten upgrade in the diesel industry.
If you noticed the intake temp at the filter is 10 degrees hotter for the stock intercooler than for the kc option(94 bs 84). But IAT2 the temps were 125 for stock and 119 for the kc. So that means that the KC air temp went up 35 and the stock went up 31. On the 1 min run stock went from 112 to 130. So 18 degree rise vs. 84 to 106 so 22 degree rise. Heat soak happens. But they didn’t give actual temps on that. But they said stock pull hot air from engine bay and theirs doesn’t. Well the fact is if they have the stock pulling engine bay air and not theirs then they have done that to skew the numbers. You should never pull engine bay air into the filter. Also they mount the exact same way. Location bolts and boots. Granted they may have more efficient air flow through the intercooler and that will definitely help. I would upgrade to theirs if I was in the market just for the welded aluminum end tanks and the flow. But their video is misleading to an extent. Still a great product but in my personal opinion not worth the money if a new one isn’t needed at the moment. Still would 100% recommend their turbos.
I have been waiting for something like this for a long time. The facts about the real benefits of upgraded 6.0 intercoolers has been a bit of an enigma. Thank you for making this, and all of your videos.
Years ago I went with the CSF heavy duty offering. Much stouter piece than OEM. I like to have the all metal end tank construction. For high boost 50+ you pretty much need a bar and plate style construction type. This KC turbo piece is really nice!
I LOVE your videos ! The facts, engineering, explanations of your products. Two thumbs up !
What are the odds we get a KC vs banks with the same data?
Great comparison!
love this comparison🙌🏻
Charlie, your videos and presentation skills are top notch! One request: can y’all PLEASE make a made in USA oil cooler for the 6.0? All USA made Motorcraft stock is finished. Very low quality is all we have now. Not good for 6.0’s.
My boost leak was very easy to find. The right side tank came completely off lol.
Haha sounds like you got lucky it was that easy! Im sure there would still have been "master techs" that would have overlooked it.
So can we stuff this in a 7.3, too, as a 6.0 OEM IC is an "upgrade" for the 7.3?
Lol exactly what I came to ask
I'm willing to be a guinea pig. Got an unmolested 01 to put it in.
@SuperDucky9 lol hell I've got a highly molested 01 I'd lend to the cause
@@jacobhammond5432 Here's what you need:
1 - 6.0L intercooler
1 - 3x3x8" intercooler boot
1 - 3x3.25x8" intercooler boot
1 - 3" intercooler boot clamp (to replace the old 3.25" clamp that will no longer fit on the driver's side).
For the install, remove the top radiator support bolts, loosen the coolant overflow bowl and just move it to a spot out of the way (you don't need to take it out. Tilt the radiator towards the engine and unbolt and remove the intercooler. It's a tight fit, but the new one will slide in. Bolt it up with the same mounting hardware used on the old intercooler, and that's it. Pretty easy.
@peixinho5927 I know what it takes to put a normal 6.0 IC in a 7.3. You forgot to add that if it's an auto trans, you have to move the trans cooler or do the 6.0 cooler too
I run 60 psi through one of these on my CR Cummins in my F250. Solid piece
Great video
Sounds like these trucks were never meant to tow a boat or heavy equipment....
Or should you not be towing up the side of a mountain or in downtown???
Nice video! Does Banks happen to outperform this intercooler? Just wonder if the difference might justify the cost.
We have not tested them side by side, but the banks says its 19% larger than stock and the KC is 25% larger. I would feel confident in saying out intercooler will outperform it. Now the banks does also come with a piping kit, so that is neat if you like the color red.
@@KCTURBOS Banks will not sell a product unless it can outperform the competition. They buy all of the competing products, and test their performance against them.
I’ve got a 05 an I’ve been hesitant on upgrading my intercooler only because I’ve been throwing around the idea of making a water to air kit for it an throwing the battery on the drive side like a compound set up. Over all less heat in the front of the radiator an space to increase the main radiator in addition to a new radiator for the water to air intercooler where the oe intercooler was. Less heat over all…. Please make it so I don’t have.
The new 6.7s run a water/air setup and most people agree it has a lot of downsides. Its a lot of extra equipment needed including 2nd radiator, pump, lines, etc. And the benefits don't seem to make it worth it. They also tend to get heat soaked quickly when pulling a long grade and then they are much worse than air to air.
@@peixinho5927 im fully aware on how the scorpion operates, ive installs many piping kits in my time. the secondary coolent is shared between the EGR an intercooler. air to air works fine for highways, my application calls for slow crawling offroad. where ive had my IAT at 238 in the hills of death valley. no air to air will fix that. so nitrous an water to air with an ice box will.
@@DentonDekker That makes sense. That is a good idea
Are the early 6.0s i/c smaller? I just remember swapping my 03's with an 05's i/c and I had to get bigger boots. It was like going from 3'' to 4'' diameter. IDK if it made any difference in any performance gains or changes in temps. But it definitely eliminated the problem with blowing the driver side boot off.