How To Add An Outlet From A Light Switch
HTML-код
- Опубликовано: 10 фев 2023
- Add an outlet using a light switch as the power source.
Wire strippers amzn.to/3OaZE6y
KAIWEETS Voltage Tester amzn.to/3eqN6Yv
Kaiweets outlet tester amzn.to/3CK9FDv
Switch box straps. amzn.to/3HZTELT
Electrical box amzn.to/3nabQZn
Zircon Stud Finder amzn.to/3cQlPiG
Dewalt Drill amzn.to/2Nbuly1
Dewalt Drill Bit amzn.to/36WI2rI
Craftsman Hammer amzn.to/2Z1clZO
Craftsman Screwdriver amzn.to/3rCmHLX
Craftsman Level amzn.to/3tHeSGE
Craftsman Tape Measure amzn.to/3aQ2Fa4
Here are some of the tools that get it done home repair uses
www.amazon.com/shop/jimthecarguy
Due to factors beyond the control of get it done home repairs, it cannot guarantee against unauthorized modifications of this information,. get it done home repairs assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. get it done home repairs recommends safe practices when working with power tools, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of get it done home repairs, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not get it done home repairs.
Could you please reconfirm the model #, or provide correct link for the plug-in type Kaiweets outlet tester. Your tool reference shows on AMZ as a different type tester. Love your videos. Thanks much.
Here is the link . They did update the style but it is the same.amzn.to/3CK9FDv
A very professional and informative video, thanks.
Glad you enjoyed it!
I love that your dog hears you talking and needs to come in see what you are doing! Great video as always Jim, Great info.
Thanks Mike.They do follow me everywhere when I'm working.
Nicely done. I am not an electrician but I would add one thing. In the limited number of jobs I did early in my life I always used a wire twist connector. Today I would use a lever connector in most cases. If you choose to use a wire connector, it is essential to use the right size connector. Wire connectors are identified by color and are further identified by the weight and number of wires that can be connected using that connector That information is contained on the box or may be identified on a chart in the store where you purchased the connector or online. Here the connector(s) were not even twisted and as indicated would be an extreme issue worthy of taking a look at the whole house. I had a house built once and as I followed the work of the electricians I noticed that they had stripped the wires into the box wrong and cut into the wires at the point where they stripped the outside sheathing. Much of the project had to be redone. It was a fire waiting to happen.
Hands down I'd say your video is the best I've see here.Very detailed and safety oriented 😊👍🏽👏🏽 Thank you for sharing
Glad it was helpful!
I watched many videos and by far this one is the best. I just completed this project flawlessly because of your tutorial. Thank you!
Glad it helped!
My good friend 🐕🐕 is just watching and waiting for the job get done so he can take a nap 😴 noiseless
Great Job Jim You Are Awesome ! When I See One Or Both Of Your Dogs In Your Videos It Makes Me Smile. I Know They Bring Much Joy To You And Your Family . 👍
I will be posting a video very soon about a change to my house . On a recent trip to Florida I stopped in an animal rescue and learned about a very sad case.Long story short there will be 3 dogs in my videos. What for the upcoming video.
I just subscribed because I need to learn how to do this for my bathroom. Who builds a house and does not put an electrical outlet in the bathroom?? However, your videographer did not allow me to really get a good look. But I still look forward to learning home repairs from you. I bought a home in October and it’s my first & forever home but I’m a single 55 y.o. woman who works a lot of hours and I do not have the money to hire repair people to help me with odd jobs, like changing a light switch into a light switch outlet combo.
Thank you for helping people and sharing your knowledge. 😊
Welcome to the channel. Good luck with your projects. If you need any advice just ask.
Hi, good Q; the reason is safety. Bathrooms can get very humid and a regular socket could electrocute you when it's damp because it carries supply voltage (110V or 220V). Hotels, usually, have a special socket that has inside a mains isolating transformer that is effectively double insulatedc from the mains supply. They aren't expensive, just get advice from the hardware store on what's best for your location/regs. Here in the Philippines you often find a regular socket in the bathroom; in my last house I swapped it out for an isolating socket I bought online.
Problem is that most light switches don't have a common wire in the box. If you pull the switch out and look in the box and don't see the common wire (white wire) then this can't be done most light switches are just breaking the hot wire and don't need the common.
Very true
great video love the curious dog.feed him, he looks hungry
Thank you very much! I just adopted here check out her sad story.
ruclips.net/video/LfLKOKmrX6g/видео.html
Thanks for simple instructions!
Glad it was helpful!
Yes those tab screws turn HARD!!!
I see that there are 2 black wires on the switch. Are they “backstabbed” ? If they are, why didn’t you create a pigtail and get rid of the backstab connection?
Great work
Thanks!
Thank you for the $ I'm happy to help.
Excellent video
Thank you very much!
Trying to add a light fromThe outlet but the outlet has both neutral & hot terminals already are used. I believe one is going to the ceiling fan. Is it possible to add another light to the same outlet by pigtailing all three wires(hot,fan,light) & connecting to just one terminal?..doing same to neutrals. thank you.
I Was planning on installing an outlet in the hall of my house like you did. The 2 switches on either end of the hall that operate a light fixture are 3 way switches. looking at the switches and a diagram it showed that The neutral wire from the panel doesn't go to the switch it goes direct to the light fixture. Unless you know something I Don't It does not look like I can tap into a 3 Way switch for an outlet since there is no neutral wire at the switch going directly to the Panel.
Nice dog😊
Thank you 😊
Can this be done with the new outlet connected to a kitchen refrigerator?
I have 1 black wire, 1 white wire and a copper wire. I want to be able to use my outlet without haveing to turn on my light switch
...very nice DIY video, Jim....thanks for posting. Question: how do you know which black wire on the switch is always hot?... 🙂
Good question. If you not sure then you can use a non contact voltage tester to see which one is the live wire. Thanks for watching.
IT would be helpful to explain the actual electrical flow since you chained the neutral wire to the positive wire from the panel. It would seem as if you somehow changed the neutral wire from the panel to a positive wire, therefor reversing the polaritive of the panel. Follow the actual flow of the current.
The switch has one hot wire (incoming power) on one terminal and a switch leg or load on the other one and that goes to the light. The neutral wire from the incoming cable connects with the wire nut to join the neutral from the light, so the neutral current can pass through. The switch doesn't use a neutral wire, but it makes and breaks the current on the hot wire. He has a higher grade switch which allows the wires to be clamped under a plate when the screw is tightened. He took the black wire from the new 12/2 and joined it with the incoming power at that point under the plate, totally valid. Now he has an always hot wire for the receptacle. He got the neutral wire for the receptacle by joining it with the 2 neutral (white) wires in the switch box. The neutral wire is not "chained" to the hot wire. BTW, there's no positive wire in AC electricity, but it alternates between positive and negative 120v at 60 Hz and is called a hot wire because it always has 120vac when the circuit is live. The neutral wire is the center point between +120v and -120v and is at 0v.
As mentioned in another video, wise to check with your local authority to know if this is ok in your area.
Also this will be much harder if the neutral is not present in the box.
Another point - when using a jab saw, be careful not to go too deep and poke out the wall on the other side, and work carefully in case there are pipes or wires inside the wall.
-- A pet peeve of mine is cutting the romex leaving too much wire handing out of the wall. I usually go ahead and wire the downstream device before cutting. Copper is getting pretty expensive. Code is to leave 6” past the sheathing, and 3” past the wall. The extra sheathing inside the box can be problematic.
Using the strip gauge on the outlet prevents having to trim. Be careful not to get the insulation under the screw or pressure plate.
In the Philippines, this is a code violation.
@randomlife7935 in the Phillipines the Philippines is a code violation
@@randomlife7935 in the philippines, nothing works
How do you determine what connection on the switch is the supply line and contact and not the line going to the light ?
use a multi-meter, just check it.
As The Hunter Vlog said just for voltage on the line.
Make sure the power is turned off!
The switch I want to add an outlet off of has two wires connected to it. A white wire and a black wire, the ground wire is cut off and is not used. The old switch has only two places to put wire. I have a new switch, the new switch has three spots for wire connections and one connection for a ground so 4 total. two on one side and one on the opposite side, same side as the ground. can I wire an outlet from this switch and retain the switch as is?. I want to add an outlet about 3 feet away from this switch to plug a charger into and I want to keep the switch as it is for a light.
The way you describe your new switch sounds like a three way switch and isn't appropriate for your use case. It also sounds like you do not have power from the panel in your switch box, which is common in older homes. The wires in there are likely a switch leg and the power from the panel is at your lighting fixture. If you're curious as to how this is wired, there are diagrams in a Google image search of switch leg wiring. In this scenario, you do not have a neutral wire present and will not be able to run a receptacle from that box. That white wire currently at your switch should be field labeled as a hot with black electrical tape or some other marking, but I know in my house none of the white conductors were field labeled. In newer builds, a neutral is required to be present in every switch box but it's a relatively new addition to the NEC (I believe since 2011, but I could be wrong).
Long story short, you cannot do what he did in the video and if you're not comfortable relocating your source power from the light to the switch box, please call an electrician.
@niemo118 Awesome thanks for the response. I've come to this same conclusion after some digging a little while back. I plan on just running a wire from a Junction in the basement that's connected to a 20amp breaker. The wires in that Junction go to the man-cave and wouldn't have much of a load so I think it should be fine. Thanks for your response 👍🏽
Does this matter if is a 3- way switch or not?
No as long as you connect to the correct power wire.
Assistant is behind