You could have just soldered the original battery and speaker to the PCB, then used it in its original housing. The amplifier will be too small to comfortably drive a speaker of that size.
So even if you happened to match driver impedance so the audio amp wouldnt burn out, youre still only pushing maybe 3 watts to a speaker thats likely 25 or higher being a bookshelf speaker with tweeter and woofer combo deal.. if you knew some about the electronics driving the speaker than you could likely pin match a new chipset and replace that weaker one for only a few dollars or find a amp circuit inside something and scavenge the chip out of it..
I used an old set of Logitech pc speakers and fit the controls to the box of a sub which had buggered amp. Works well! Good job. Can you try upgrading a speaker from a toy?
good idea, and works good, but i recomendo you to make a bridge to a bigger amp for the speaker, i know that 1.5 w can make sound in that speaker but you are using like less than 20% of the capabilities of those speakers lol
The sound is like the Pioneer Speaker or same as the small one? If it has the same quality as the Pioneer well then Good! I really want to convert my old component speakers (series) to a Bluetooth one.
Don't. It is very weak I have many years experience in speakers don't do this your amplifiers will burn. I suggest getting a biiger and better amp for those speakers. If u use this you will damage speakers due to clipping. Please dont ruin those pioneer speakers they are great speakers.
Ur both wrong i have a 5 dollar walmart speaker board on a pioneer 8ohm setup. Yea its not peak and ive added tank capacitors and inductors where needed, but not everyone is a perfectionist
Don't. It is very weak I have many years experience in speakers don't do this. your amplifiers will burn. I suggest getting a biiger and better amp for those speakers. If u use this you will damage speakers due to clipping. Please dont ruin those pioneer speakers they are great speakers.
For the thousandth time, a woofer is NOT the same as a Subwoofer! Regular speaker boxes DO NOT have subwoofers, EVER, they only have woofers and tweeters (or in a 3-way speaker: woofer, mid-range, and tweeter). A subwoofer is specifically designed to produce extra powerful Bass sounds and requires a separate, more powerful amplifier to do that. A real subwoofer is simply not capable of producing some of the frequencies that you will get from that regular woofer.
You could have just soldered the original battery and speaker to the PCB, then used it in its original housing.
The amplifier will be too small to comfortably drive a speaker of that size.
What's pcb
@@danielx3395 Printed circuit board
That tiny little board is gonna go up in flames lmao
that happened to me but its the speaker was burned by my mini bluetooth speaker
My tot
So even if you happened to match driver impedance so the audio amp wouldnt burn out, youre still only pushing maybe 3 watts to a speaker thats likely 25 or higher being a bookshelf speaker with tweeter and woofer combo deal.. if you knew some about the electronics driving the speaker than you could likely pin match a new chipset and replace that weaker one for only a few dollars or find a amp circuit inside something and scavenge the chip out of it..
I would like to do this for a similar but bigger speaker. Approximately 100w speaker, what will I need?
@@andilezondi7193 an bluetooth amp board duh
speaker ke board ke andar ki virus kidhar gai 😅😂😂
You should put circuit board outside the speaker box to easily control the audio functions
that's a nice suggestion
I used an old set of Logitech pc speakers and fit the controls to the box of a sub which had buggered amp. Works well!
Good job.
Can you try upgrading a speaker from a toy?
Bilkul mere jaisa speaker hai Pioneer 😊😊
good idea, and works good, but i recomendo you to make a bridge to a bigger amp for the speaker, i know that 1.5 w can make sound in that speaker but you are using like less than 20% of the capabilities of those speakers lol
Thanks for your suggestion, I am really a beginner in this field.
@@SZHacks see this will be helpfull ruclips.net/video/a43LXqRwQC8/видео.html
You can do this but only if you want it to work for a minute or two but failing that, if you want to burn the premises the speaker is in.
Does the speaker from this project still alive today?
And how is the protection of the circuit and the power of the amplifier in watts?? I believe this idea can be improved.
I will tell you something simple the project is fine but it would not be better to buy a module of about 15 watts rms to make it sound much better
I will tack audio board in old laptop speaker is that working or not
How do you turn on the speaker if the button is on interior of the speaker 🤔
It work or not agar nahi hiya tho bord jaal jaye ga
Circuit kharab to nahi hoga na ....???
The sound is like the Pioneer Speaker or same as the small one? If it has the same quality as the Pioneer well then Good! I really want to convert my old component speakers (series) to a Bluetooth one.
Don't. It is very weak I have many years experience in speakers don't do this your amplifiers will burn. I suggest getting a biiger and better amp for those speakers. If u use this you will damage speakers due to clipping. Please dont ruin those pioneer speakers they are great speakers.
Xd 3w speaker amplifier connected to 30w hifi speaker xddddd
Audio board will get blast within few minutes
Ur both wrong i have a 5 dollar walmart speaker board on a pioneer 8ohm setup. Yea its not peak and ive added tank capacitors and inductors where needed, but not everyone is a perfectionist
@@kastlewaters9517 great
Pingu know what’s really great pingu.
@@kastlewaters9517 yah man I know
We could put the audio board on the top of the speaker and then the case with the buttons to protect it and we can also control it
Thats a good point ☺️
@@SZHacks and cant we all so use battery
Is there any harm to ic board??
Plz replay bro
Aa boardnu valla problevum varumo broo??
Don't. It is very weak I have many years experience in speakers don't do this. your amplifiers will burn. I suggest getting a biiger and better amp for those speakers. If u use this you will damage speakers due to clipping. Please dont ruin those pioneer speakers they are great speakers.
How about when using speaker with same or lower watt RMS? 80s boombox only have 2.5W 3.2ohm, when mini amplifier is 3W 4ohm
You have no experience in audio if you say that a small 3W amp can damage a 80w speakers.
One thing only blow out speakers and its power.
I don't have any subwoofer
Thats why i just want to buy new speaker from
Market so please suggest me some speaker
Ohm and inch
Need bigger speakers and smaller amp
For the thousandth time, a woofer is NOT the same as a Subwoofer!
Regular speaker boxes DO NOT have subwoofers, EVER, they only have woofers and tweeters (or in a 3-way speaker: woofer, mid-range, and tweeter). A subwoofer is specifically designed to produce extra powerful Bass sounds and requires a separate, more powerful amplifier to do that. A real subwoofer is simply not capable of producing some of the frequencies that you will get from that regular woofer.
Eu já achei uma caixa amplificadora quebrada com o Aulto falante 30 watts e colocar uma plaquinha ws funcionando tudo e ficou boa
Can we make like this really I have 3 watt speaker I want to make it forever 6 watt speaker what things I have to add please help
that poor lil audio board dude I'd use an old radio if i were you you could get a lot more sound
Very amazing idea
i make same speaker before come your video really
Will its work??
But there's a problem with the same board it gives irrating humming noise audible in low volume how to fix that thers nothing for ground
I don't know why that humming sound from the board
R.i.p amp
Nelu Csonca can u tell me what will happen to amp?
@@francissangehortelano3926 amp will get hot and break in no time
Necesita un amplificador o tendrá la misma potencia q la anterior... Y no tiene sentido
Boss I done this. But can't increase louder volume.. I done same speaker on video..
the amp is too weak. In ebay there are amps like 30+30 wats for les than 3 dollars.
This is the small circuit but volume not increase
i am make u idia but cirkit very hit and dont good sound bro pls make a small trolly speker i am vating fore u video
Fake
Too simple everyone can make this you know 😅
true i did it for my girlfriend 🤣
Yes, everybody can, but not everyone REALIZES they can.
its magic.. lol
😍💞
new subscriber hereeee! thanks for the great vids :D 🤯😵😀
The circuit will heat
Not sufficient power from the amp...🤔
Bro ye kit hot ho rhe he jaldi
Ye thodi der ke baad khrab ho jayega
e bord ic me subwoofer nahi chalta 12volt high amps ka amplifier laga vai es bord me Tina takat nahi hain
have a fire extinguisher near by
Fantastic video bro! 💯💯💯
Thanks😘
Better use that fake at least it will last for a month
You did nt connect the tweeter..
also button for power on is inside the box.
good speaker bro
wheres the battery this ones afake
no battery needed , I'm using USB cable's 5V
Thank you vai
Bord was heat
the audio is going to be still crap
10,09,08,07,...boooom adeus Xing ling..........
The board will be broken cause it cant hadle it
It is of 4 $
Eimas.Himas.Rimas.Fimas.Timas✨✨
Super anna
Awesome bro
Nice
Thanks😘
It's worst idea
poor sound quality .
Bro you are gunious
Esa hota to loog big amplifier kyo kharidte
English please 💖
dislike,not intrested👎👎👎👎
Yet you watched it..... hmmmmmm
It's work
👍👍👍👍👍👍👍👍👍👍👍👍👍
😚
lie hahaha
Inverter
ഉണ്ടാകാൻ നോക്കി, വർക്ക് ചെയ്തില്ല
Nee enthoke components vacha undaakiyee
Fake