I have the 85 Finnlight in 6,5x55SE and would love to have a blued steel/walnut version in perhaps 30-06 but so few get imported at a time and it's usually once a year.
Just soft touch beläggningen är en känslig process att få dit, vissa exemplar har haft vi sett att det lossnat på men det är tacksamt få i förhållande till antalet vi säljer. Är man inte nöjd med kvaliteten på den produkt man köpt är det som vanligt bara att man vänder sig till sin butik och reklamerar den. Så tar de kontakt med oss och vi ser på varje fall individuellt.
Bought a Sako 85 m hunter in 30.06 using Sako cartridges, optilock bases and optilock rings, the rifle will not eject without denting the case on the neck or dropping back on top of the magazine . After either hitting the scope base Ora scope wind age turret. Wrote to them and no reply , this problem is in every gun site forum, blogs and on u-tube. To beretta, you own this prestigious company Sako, you need to manage them to fix the issue, to Sako , we love your work, but when it does not work we just shake our heads I can foresee a class action suit against your company. To force an international recall or refund. This video clearly shows how it should eject, you need to test everyone at the factory, as mine does not come out like that. A fix is required , some say it's due to scopes, that's nonsense, we can't. Be expected to buy old fashioned scopes or turn then 90 deg , or move them extreme forward or back, what about our eye relieve ?, even with high rings it still hits the scope and bounces back onto the mag. Some say it's due to a badly fitting extractor claw, not close enough to the bolt face so the cartridge wobbles around during the ejector strike, I believe this one after a lot of studying and trying all the other "cures" . Beretta your company is over 500 years old, you invested in Sako, you are now joined at the hip, a failure on Sako's part to fix this is a failure on your company as well. Get the engineers together, have a good old workshop meeting and come up with a fix. You may want to investigate a set of two or three extractor claws where each is graded to be app 5-10 thou different space between claw and bolt face. These should then be offered free of charge to Sako owners to be able to test and get best fit , for their particular circumstance, as depending where Sako drilled the retainer hole on the bolt, or how much they took off the bolt face to get correct head spacing , will mean a floppy cartridge , requiring a shorter length extractor. Or perhaps if this is indeed the issue, we could be given a new extractor claw, spring and pin set, as many have somehow Magee to get this and it has solved the problem, leading us to believe the the extractor claws are already being made in different dimensions, just not deliberately. If your investigation shows that all claws are exactly the same dimension then revert to an option kit as we can not re- engineer our bolt drilling, or just provide one more extractor with a broader claw edge, so we can fit and file back to required. I have no idea how you should do it, that really is your job and I am sure if you put your heads together you will find the answer , I would suggest that if it's the extractor it's such a simple and inexpensive fix , to make a new option extractor and ship them to all your worldwide dealer network , problem solved . I and thousands , well maybe not thousands maybe only a few hundred, other owners simply need a fix, most work perfectly even with the exact same scope and mounting configuration, so it's gotta be fixable for those that don't , something concrete, tangible ,, not the same old story that there is nothing wrong. It's not about the money we spent , it's about our expectations , we expected a perfect working rifle in every respect, when that does not happen we get upset, frustrated and feel let down. Please attend to this issue, so that we can all be proud of our beretta and Sako gun ownership and get the full experience of these otherwise fine products.f
I notice you are taking on the role of speaking for everyone by constantly saying "we" instead of "I". You don't speak for me. My results, and my nephews results with his, has been stellar. 100% reliability. Mybe my Leupold is "old fashioned" but I'm not a sniper or wanna be sniper so somehow it gets the job done. How many places have you made tbis exact comment to? Rather than bitching and bad mouthing what are you DOING about it?
I don't understand what was said but I like the visuals. Lefties welcome
Now I have to find the prices and get buying
I bought a Sako 85 and I love it
They are incredible rifles.
Asså jag skulle kunna lyssna på Patric i timtal när han pratar om bössor.
Fantastisk bössa. Jag enormt nöjd med min Sako 85 De Luxe som har ett väldigt vackert kolvträ. :-)
Vad kul att höra,
I have the 85 Finnlight in 6,5x55SE and would love to have a blued steel/walnut version in perhaps 30-06 but so few get imported at a time and it's usually once a year.
Mycket nöjd med min hunter 85, men verktygen som ska följa med lade nog handlaren rabarber på, så att säga 😆
Fixa kvaliteten på plaststockarna på 85an.. Gummeringen släpper ju redan efter en vecka... riktigt rappel. Sett ett flertal som det släppt på
Just soft touch beläggningen är en känslig process att få dit, vissa exemplar har haft vi sett att det lossnat på men det är tacksamt få i förhållande till antalet vi säljer. Är man inte nöjd med kvaliteten på den produkt man köpt är det som vanligt bara att man vänder sig till sin butik och reklamerar den. Så tar de kontakt med oss och vi ser på varje fall individuellt.
Tack för återkoppling. I övrigt kanonbössor.
Blir slagstiftet låst i säkrat läge på sako 85?
Finns det några planer på att göra 85an i ett utförande mer anpassade för kvinnor?
Just nu finns det inte några sådana planer.
Måste skaffa mig en 13x70 med sån där najs hålbroms
Har ni tänkt att släppa någon mer modell i vänsterutförande inom kort? T.ex. finnlight eller SS
I år kommer det ingen mer tyvärr, det är Carbonlightmodellen som är årets vänsternyhet.
Vi får se om det kommer någon mer till 2018.
när gör ni en civil m10? med mer "vanlig" kolv?
Vad vi vet idag så är det inte på gång inom den närmaste tiden,
I wish that in 7mm remington magnum
They are $5000 now in Russia thanks to the embargo. 😭
Ouch
Bought a Sako 85 m hunter in 30.06 using Sako cartridges, optilock bases and optilock rings, the rifle will not eject without denting the case on the neck or dropping back on top of the magazine . After either hitting the scope base Ora scope wind age turret. Wrote to them and no reply , this problem is in every gun site forum, blogs and on u-tube. To beretta, you own this prestigious company Sako, you need to manage them to fix the issue, to Sako , we love your work, but when it does not work we just shake our heads I can foresee a class action suit against your company. To force an international recall or refund. This video clearly shows how it should eject, you need to test everyone at the factory, as mine does not come out like that. A fix is required , some say it's due to scopes, that's nonsense, we can't. Be expected to buy old fashioned scopes or turn then 90 deg , or move them extreme forward or back, what about our eye relieve ?, even with high rings it still hits the scope and bounces back onto the mag. Some say it's due to a badly fitting extractor claw, not close enough to the bolt face so the cartridge wobbles around during the ejector strike, I believe this one after a lot of studying and trying all the other "cures" . Beretta your company is over 500 years old, you invested in Sako, you are now joined at the hip, a failure on Sako's part to fix this is a failure on your company as well. Get the engineers together, have a good old workshop meeting and come up with a fix. You may want to investigate a set of two or three extractor claws where each is graded to be app 5-10 thou different space between claw and bolt face. These should then be offered free of charge to Sako owners to be able to test and get best fit , for their particular circumstance, as depending where Sako drilled the retainer hole on the bolt, or how much they took off the bolt face to get correct head spacing , will mean a floppy cartridge , requiring a shorter length extractor. Or perhaps if this is indeed the issue, we could be given a new extractor claw, spring and pin set, as many have somehow Magee to get this and it has solved the problem, leading us to believe the the extractor claws are already being made in different dimensions, just not deliberately. If your investigation shows that all claws are exactly the same dimension then revert to an option kit as we can not re- engineer our bolt drilling, or just provide one more extractor with a broader claw edge, so we can fit and file back to required. I have no idea how you should do it, that really is your job and I am sure if you put your heads together you will find the answer , I would suggest that if it's the extractor it's such a simple and inexpensive fix , to make a new option extractor and ship them to all your worldwide dealer network , problem solved . I and thousands , well maybe not thousands maybe only a few hundred, other owners simply need a fix, most work perfectly even with the exact same scope and mounting configuration, so it's gotta be fixable for those that don't , something concrete, tangible ,, not the same old story that there is nothing wrong. It's not about the money we spent , it's about our expectations , we expected a perfect working rifle in every respect, when that does not happen we get upset, frustrated and feel let down. Please attend to this issue, so that we can all be proud of our beretta and Sako gun ownership and get the full experience of these otherwise fine products.f
Try higher ring/bases
I notice you are taking on the role of speaking for everyone by constantly saying "we" instead of "I". You don't speak for me. My results, and my nephews results with his, has been stellar. 100% reliability. Mybe my Leupold is "old fashioned" but I'm not a sniper or wanna be sniper so somehow it gets the job done. How many places have you made tbis exact comment to? Rather than bitching and bad mouthing what are you DOING about it?
Måste skaffa mig en 13x70 med sån där najs hålbroms
Q