Thanks for explaining what each P setting adjusts. The idiots on other videos are just running the numbers up not knowing what they are adjusting and the Chinese manufacturer hid all this information from their customers. This should be included in the owner's manual.
@@CheechsbossI would not try reprograming the controller because I burned mine trying to make adjustments and had to replace the controller, but it shows P8 is where top speed is adjusted. I can't get my bike past 15mph now even though it is set for 20mph. Just stop peddling and back off the throttle.
@@GRATEFULNEILI’m new to all this so not an expert but did u adjust the wheel size by accident? I believe if that is higher it makes the wheel use less rotations and is slower
@ Hey Captain Jack! I adjusted my P settings according to the RUclips video attempting to increase my maximum speed as shown and ended up burning out my controller! ☹️ Luckily a replacement controller was only $19. I adjusted the P-6 wheel size to 26. P-8 is the top speed adjustment and even though I have it set at 20mph, my bike will only do 14mph now. I do not have the need to go any faster. I'm reluctant to try different settings for the fear of burning out another controller. If I had just not messed with the factory settings my bike would still be capable of 19mph. The Chinks don't want to spill the beans about changing settings and the electric bike shops laugh at the Totguard saying it is a throw away bike. I like it. I put hundreds of miles on it and only had to replace brake pads and adjust the derailers. I covered up the Totguard emblem and made in China and replaced them with USA and the Lamborghini emblem.
Thank you so much, my friend! This is the the first (and so far the only) Tutorial I could find on that controller - which gave me quite some headache, before I found your video! I cant believe that you have only 83 followers, and 24 likes on this video - .... well in both categories +1 now! ;) I bought a Duotts C29 last week, and received it today (750W 48V, 29 inch MTB) ... and tried to find my way through the controller settings with common sense (for about an hour or so - not much luck there) I'm gonna link your video in my review (on geekbuying) - hoping that it will help a some other buyers to find their optimal settings - which, if you try to take regulations serious, could turn out to be quite challenging in Europe - cause besides the general EU directive that generalizes that things on wheels with any sort of engine or motor accelerated to a speed of over 45 km/h (roughly 30 mph) have to be registered, insured, and the driver needs to posses a license. ....... ...... the specific regulations tend to show some deviations from each other (regarding the allowed speed / the max power / Throttle/ PAS only) so its very useful to know how to restrict amps, speed, or how to turn the throttle on/off to conform with local laws/ regulations! For example in Austria (where I live) there is a power limit of 600W, and a (supported) speed limit of 25 km/h so I limit the controller to a current draw of 12 A, and the speed to the mentioned 25 kmph. This leaves me with a perfectly legal bike, with more than enough power to push me uphill - which is exactely, the purpose for which I bought this ebike! I dont need to brake any speed records, I had my share of crazy, fast motorbikes in my life!
👌👌👌👍👍👍thank you so much you have shown me and i understand what yur explaining unlike other vidios iv watched who just talk and go on and on and i end up back to square one so thank you your the BEST .....
Yes, please. This would be great. My bike has a limit at 25 km/h, but I always exceed this speed using the pedals. Totally pointless having this limiter feature. I understand it is set by law, but laws are there to be broken :)
Hi on the setting number 18 about the throttle why is it better being set to 100, just got my e-bike and just learning about things you can do on the setting. Great info.
Congratulations, very good video tutorial. I would like my bike's electric assist to start earlier (as soon as I start pedaling), what parameter should I set? I tried P 12, but I didn't feel any apparent difference. Thank you.
Thank you so much.. Have you discovered how to reset everything to their default values? The controller on my bike (DUOTTS C29) has only 16 settings) . If so please enlighten me..
These settings seem to be the same as the GPO1 display I have on my new Metakoo Cybertrack 100. Thanks for helping me figure it out. I'm still left with the original problem, and that's the throttle speed doesn't go over 23kmh. It's very frustrating, I'm going to give it a few more days to figure it out, or for the seller to get back to me before I decide to return it.
Hi Fred, I am guessing your ebike has a higher top speed than 23km/h. In Australia the laws actually state our throttle should cut out at 6km/h hence why there is that option on this ebike. It is definitely worth speaking to seller as the top out throttle speed might be a factory setting. Generally if you increase the max speed the throttle should also go to top speed i.e. 32km/h with my video. Obviously hills can slow max speed but this may be something you can't alter. Better to check with them first rather than spend time trying to figure out on your own.
Hi Pablo, I think this may be a whole video in itself. I haven't got this ebike anymore to experiment as I sold them all but I think you are referring to setting P17. The user manual gives the following instructions: P17: (Customer Designated) Auto Cruise Option. 0: No Auto-cruise 1: Auto-Cruise On. Trigger time of auto-cruise is decided by the controller I am guessing you change to setting 1 (auto-cruise). This would mean though that auto-cruise is only decided by the controller and can't be activated by the rider which sounds a little frightening to me to be honest.
I managed to find the actual instruction manual for this display, and it does tell you how to use cruise control ( the enfl8sh is very broken in the manual so it's frustrating to read)
“Keep the throttle still while driving. Press and hold the” -” key for 5 seconds at the same time turn on Cruise Control mode.” This is what the manual says
Amazing, how do you explain everything. Tomorrow I'm going to test the throttle options because it looks like it is not working in my bike. I hope that is disabled
The motor and wattage side is not relevant more that this is for the G51 display. If your ebike model uses the same display the settings should be the same.
I have a question regarding the PAS Assist, the 7 gears, and the extended range battery for my electric bike. To reach the maximum range of 90km, would I need to adjust the PAS Assist level along with the 7 speed gears while I'm pedaling and/or using the throttle?
Hi thanks for the video it will help alot of people Now dont know if this will work for the FREEGO EV DK200 also but in case if dont does anyone know the factory settings or if theres a video on how to set it back to normal settings. My bike is a 48volt with a 750 watt hub motor. also my controller is a 19 amp + 1 amp please help a brother out. Thanks 🙏
I have just bought this bike and decided to increase the speed up just a little but I'm out of luck. These new bikes only allow you access to p01, p02 and p16. Anyone find a work around?
I have a question on my amyet ebike when my battery level turns orange or red but on my screen it shows 100% is there a way to fix that or do u have a video on how to fix that
Thanks for making this video. I'm having issues when I get to P12, How do I adjust the lower number.It doesn't matter if go to p11-p18 I can't make any changes to lower number in display. I've tried holding minus for 10 seconds nothing. Can you help ? thanks
Say I've got a screen just like that my bike only works now on pedal assist where it used to show the mileage now it shows an E 8 and shows a picture of a throttle assembly and now the throttle does not work only on pedal assist
How do I get my peddle assist to start. Because when I have it on peddle assist 1 the peddle wasn’t turning as I peddled. My throttle works fine but my peddle assist is not responding. Is it a setting I have to configure?
I have changed the value P07 and as a result the speedometer doesn't show km/h or mile/h... I don't remember the previous default anymore... any help me???
My bike only goes up to pedal assist level 3 and PO1/6 I don't know what that means and It initialy went 20mp now it's going up to 35mp but I can't set it back to 20mp it's not going back I must be doing something wrong I don't know 😂
When i hold it plus and minus down it shows a the letter “c” and makes me input 4 digits which i assume means “put in the code”. Anyone got an idea of what i do?
I have a 350 watt tote guard ebike. Just had to have a new bafang hub motor put on after over 4,000 miles on the old one. But the new hub motor even tho it is still 350 watt feels weak and slower than the old one that had alot of miles on it. Maybe these settings will help.
when I did these settings, I noticed that the voltage setting was set to 52 from the manufacturer, but my battery is a 48v 12ah, why the company did that? Should I set it to 48v?
What happens if i change the voltage what would happened please help me i just bought the bike and it was my birthday gift and I'm scare i accently broke it
If you haven't ridden it on the wrong voltage it should be ok. I would recommend changing the setting back as soon as you can though. If you read through the previous comments I provide the full code settings. Here is the manual: edbikes.co.nz/wp-content/uploads/2019/10/LCD-G51-Manual-1.pdf. You can change the voltage via P3 setting. Depending on your model of bike it will most likely be 36V or 48V. My bike had a 36V. If unsure it should be written on the battery (36V 10Ah) something like that. If you still can't figure it out then I would suggest taking it to your local bike shop who could fix it for you.
what if the computer started with setting points p11 to p20, but for reasons I don't understand, after about a month it now only has p11 to p16? The cruise control was working fine and now it doesn't work. why could this have happened and how can I fix it?
You may have done a factory reset by mistake. See manual here: www.scribd.com/document/535837513/manual-lcd-display-g51. Is the screen asking for a passcode? I believe some require passcode of 2020 to get into full display settings. Unfortunately I no longer own this bike with the G51 display so can't check my display to work out what happened.
@@nextgene-rides7522 No, I don't know anything about any password and the screen didn't ask for anything. I wouldn't even know where to enter the code. When the cruise control was in operation, it was activated by simply turning the throttle some secs. And i cant reach p17 settings no more.
The video is primarily for speed display settings but here is a link to the display manual which I used as a reference. edbikes.co.nz/wp-content/uploads/2019/10/LCD-G51-Manual-1.pdf. The full parameters are: 00 - factory reset, 01 - Display screen luminance 1-3 (3 brightest) 02 - unit of mileage i.e. km/h or m/h, 03 - Voltage grades 24,36,48 04 - Sleep time for display (1-60), 05 - pedal assist grades factory setting is only levels 1-3, second setting is to increase to levels 1-5, 06 - Wheel size unit in inches 07 - Speed measuring magnet 1-100 P08 - Speed limit 0-50km/h. I think the max speed is 32km/h with this model. P09 Zero start & Non-zero Start. 0 is Zero Start, 1 is Non-zero Start P10 Driving mode. 0: driven by PAS. Throttle is useless at this time. 1: driven by Throttle. PAS is useless at this time. 2: driven by PAS & Throttle. Throttle is useless at Zero Start status. P11 PAS sensitivity. Range: 1-24 P12 PAS start strength. Range: 0-5 P13 PAS magnet type: 5, 8, and 12. P14 The Current-limiting of Controller. default is 12A. Range:1-20A P15 Unspecified P16 Reset ODO. Long press for 5s, ODO could be reset. P17: (Customer Designated) Auto Cruise Option. 0: No Auto-cruise 1: Auto-Cruise On. Trigger time of auto-cruise is decided by the controller. P18: (K5S, APT Protocol Bound) Throttle Level Option. 0: No throttle level. 1: Has throttle levels. P19: (K5S Protocol Bound) 6km/h Cruise Throttle Definition. 0: Throttle has no 6km/h cruise definition. 1: Throttle has 6km/h cruise definition.
Also note that I am not talking much about parameters that are best left as they are set. For example you wouldn't change the voltage as this would be correctly set by the factory before the bike is sent out. I am trying to avoid people changing settings best left as they are. Most people only change the PAS setting and max speed but any changes are at your own risk and may void warranty.
Code is 2020 push the + - together then use the middle button then u could move digets to get to 2020 and shen u do push the middle button again to get to the P menu. good luck
Contact the manufacturer or the seller. Because, the manuals do not explain what all the settings mean or does. That way you can better understand how to set everything. And that way you don't think your bike is broken. For some reason the manuals do not come with the info about the settings and that's bad.
Hi Mark, The e09 error is a controller failure error. See G51 manual edbikes.co.nz/wp-content/uploads/2019/10/LCD-G51-Manual-1.pdf. There are no details on how to fix this but with an error it usually requires a through check of wiring (no damage or loose wiring). The waterproof connector pins can easily get damaged and through up an error code. If you cannot find an obvious issue it may need the controller replaced. Best idea though is to take it to a professional ebike shop and see if they can find the error and if under warranty contact the reseller.
Thanks for explaining what each P setting adjusts. The idiots on other videos are just running the numbers up not knowing what they are adjusting and the Chinese manufacturer hid all this information from their customers. This should be included in the owner's manual.
I want to lower the speed on the POS for my safety. How do you do it. Is it one of the P settings
@@CheechsbossI would not try reprograming the controller because I burned mine trying to make adjustments and had to replace the controller, but it shows P8 is where top speed is adjusted. I can't get my bike past 15mph now even though it is set for 20mph. Just stop peddling and back off the throttle.
@@GRATEFULNEILI’m new to all this so not an expert but did u adjust the wheel size by accident? I believe if that is higher it makes the wheel use less rotations and is slower
@ Hey Captain Jack! I adjusted my P settings according to the RUclips video attempting to increase my maximum speed as shown and ended up burning out my controller! ☹️ Luckily a replacement controller was only $19.
I adjusted the P-6 wheel size to 26.
P-8 is the top speed adjustment and even though I have it set at 20mph, my bike will only do 14mph now. I do not have the need to go any faster. I'm reluctant to try different settings for the fear of burning out another controller. If I had just not messed with the factory settings my bike would still be capable of 19mph. The Chinks don't want to spill the beans about changing settings and the electric bike shops laugh at the Totguard saying it is a throw away bike. I like it. I put hundreds of miles on it and only had to replace brake pads and adjust the derailers.
I covered up the Totguard emblem and made in China and replaced them with USA and the Lamborghini emblem.
I can’t get to the p settings bc it takes me to this 4 digit code thing but idk how u get in
Thank you so much, my friend!
This is the the first (and so far the only) Tutorial I could find on that controller - which gave me quite some headache, before I found your video!
I cant believe that you have only 83 followers, and 24 likes on this video - .... well in both categories +1 now! ;)
I bought a Duotts C29 last week, and received it today (750W 48V, 29 inch MTB)
... and tried to find my way through the controller settings with common sense (for about an hour or so - not much luck there)
I'm gonna link your video in my review (on geekbuying) - hoping that it will help a some other buyers to find their optimal settings - which, if you try to take regulations serious, could turn out to be quite challenging in Europe - cause besides the general EU directive that generalizes that things on wheels with any sort of engine or motor accelerated to a speed of over 45 km/h (roughly 30 mph) have to be registered, insured, and the driver needs to posses a license. .......
...... the specific regulations tend to show some deviations from each other (regarding the allowed speed / the max power / Throttle/ PAS only)
so its very useful to know how to restrict amps, speed, or how to turn the throttle on/off to conform with local laws/ regulations!
For example in Austria (where I live) there is a power limit of 600W, and a (supported) speed limit of 25 km/h
so I limit the controller to a current draw of 12 A, and the speed to the mentioned 25 kmph.
This leaves me with a perfectly legal bike, with more than enough power to push me uphill - which is exactely, the purpose for which I bought this ebike!
I dont need to brake any speed records, I had my share of crazy, fast motorbikes in my life!
Ditto to that!!! Found lots that showed me the options but did NOT expain a thing! Bravo!!!
Thanks this is the only video I’ve found that explains what the settings do cheers
👌👌👌👍👍👍thank you so much you have shown me and i understand what yur explaining unlike other vidios iv watched who just talk and go on and on and i end up back to square one so thank you your the BEST .....
Thank you for taking the time to explain the program parameters. Help's me with my current Metakoo 48V ebike.
bot
Think I fixed my bike with your help thx 😂😂😊😊😊😊😊
Yes, please. This would be great. My bike has a limit at 25 km/h, but I always exceed this speed using the pedals. Totally pointless having this limiter feature. I understand it is set by law, but laws are there to be broken :)
Thank you so much this helped me a whole lot
Hi on the setting number 18 about the throttle why is it better being set to 100, just got my e-bike and just learning about things you can do on the setting. Great info.
So you can get more speed out of less throttle turn hope that helps
Congratulations, very good video tutorial. I would like my bike's electric assist to start earlier (as soon as I start pedaling), what parameter should I set? I tried P 12, but I didn't feel any apparent difference. Thank you.
Cool Video
Thanks for this. Any idea about error codes???
Good explanation
Thank you so much.. Have you discovered how to reset everything to their default values? The controller on my bike (DUOTTS C29) has only 16 settings) . If so please enlighten me..
Hi, is the settings the same for gunai gn68 2000w e bike
Do u know how to fix battery percent being wrong ?
Hi. Thank you for this video. I have the same speedometer as yours in this video but mine doesn't show the P08. Do you know how I can change my speed?
These settings seem to be the same as the GPO1 display I have on my new Metakoo Cybertrack 100. Thanks for helping me figure it out. I'm still left with the original problem, and that's the throttle speed doesn't go over 23kmh. It's very frustrating, I'm going to give it a few more days to figure it out, or for the seller to get back to me before I decide to return it.
Hi Fred, I am guessing your ebike has a higher top speed than 23km/h. In Australia the laws actually state our throttle should cut out at 6km/h hence why there is that option on this ebike. It is definitely worth speaking to seller as the top out throttle speed might be a factory setting. Generally if you increase the max speed the throttle should also go to top speed i.e. 32km/h with my video. Obviously hills can slow max speed but this may be something you can't alter. Better to check with them first rather than spend time trying to figure out on your own.
Good stuff mate. Made it ezy.
That helped me big time thank you....
2:03 Thanks man! How do you engage cruise control in the bike? I have been trying different ways but i can’t manage.
Gabe you found out?
Hi Pablo, I think this may be a whole video in itself. I haven't got this ebike anymore to experiment as I sold them all but I think you are referring to setting P17. The user manual gives the following instructions:
P17: (Customer Designated) Auto Cruise Option.
0: No Auto-cruise
1: Auto-Cruise On. Trigger time of auto-cruise is decided by the controller
I am guessing you change to setting 1 (auto-cruise). This would mean though that auto-cruise is only decided by the controller and can't be activated by the rider which sounds a little frightening to me to be honest.
I managed to find the actual instruction manual for this display, and it does tell you how to use cruise control ( the enfl8sh is very broken in the manual so it's frustrating to read)
“Keep the throttle still while driving. Press and hold the” -” key for 5 seconds at the same time turn on Cruise Control mode.” This is what the manual says
Is there a manual for this bikeSML RO S11? Im having trouble,and i could use a troubleshooting guide.
Amazing, how do you explain everything. Tomorrow I'm going to test the throttle options because it looks like it is not working in my bike. I hope that is disabled
and for the 750W 48V as well?
The motor and wattage side is not relevant more that this is for the G51 display. If your ebike model uses the same display the settings should be the same.
I have a question regarding the PAS Assist, the 7 gears, and the extended range battery for my electric bike. To reach the maximum range of 90km, would I need to adjust the PAS Assist level along with the 7 speed gears while I'm pedaling and/or using the throttle?
Hi thanks for the video it will help alot of people Now dont know if this will work for the FREEGO EV DK200 also but in case if dont does anyone know the factory settings or if theres a video on how to set it back to normal settings. My bike is a 48volt with a 750 watt hub motor. also my controller is a 19 amp + 1 amp please help a brother out. Thanks 🙏
I have this lcd in my FAT bike, but i cant change anything :( u help??
I have just bought this bike and decided to increase the speed up just a little but I'm out of luck. These new bikes only allow you access to p01, p02 and p16. Anyone find a work around?
I have the same thing
Is P8 basically letting me change the speed limit on my bike to be higher them it comes factory?
Yeah most are limited to the legal speed of whatever country it is sold in.
Nice info
can you please help accessing the settings on my walberg urban hmbg e scooter display
Hi, i have the same settings but my throttle is still blocked to 6km/h how to unlock full speed?
Am I able to change the controller on my ancheer electric bike?
so how do I make the think go faster, video on elimination of speed limiter please👌
Do you mean make it think it’s going slower? I had to adjust me wheel size input down to get an accurate speed reading
My throttle won’t work in the top of my screen says CUR can’t get rid of it
Thank you
My controller only goes to P16 it is a SMLRO XDC600 any info on programming?
I have a question on my amyet ebike when my battery level turns orange or red but on my screen it shows 100% is there a way to fix that or do u have a video on how to fix that
Can you turn on the light and make it stay on when you riding in the night
😊' 👍🏾
Thanks for making this video. I'm having issues when I get to P12, How do I adjust the lower number.It doesn't matter if go to p11-p18 I can't make any changes to lower number in display. I've tried holding minus for 10 seconds nothing. Can you help ? thanks
What about the 1000w motor on pike 27.5 inches 24 Ha 52 V please 🙏
Is that the default settings for the 27.5 or the 26 bike
Say I've got a screen just like that my bike only works now on pedal assist where it used to show the mileage now it shows an E 8 and shows a picture of a throttle assembly and now the throttle does not work only on pedal assist
Is this for all ebikes?
Just relevant to G51 display controller. Check which model your display is and then find the relevant video for that model.
Can any tell my how to access Bluetooth so I can pair up to app it’s the same display that’s been shown tganks
How do I get my peddle assist to start. Because when I have it on peddle assist 1 the peddle wasn’t turning as I peddled. My throttle works fine but my peddle assist is not responding. Is it a setting I have to configure?
This made my bike only go 15
Is the speed measuring magnet 86 or 100 ?
I have changed the value P07 and as a result the speedometer doesn't show km/h or mile/h... I don't remember the previous default anymore... any help me???
@@Boediprasetya go to P16 press"-" for 10 sec. after this press"-" and"+" for around 3 sec. This is reset to fabric settings. :)
@@vito74m Does this apply to SW900? Thanks i will try it
Hi. I have the same display in my Duotts C29 with 750W 48V engine and 48V battery 15Ah and the P3 value is set on 48🤔
How does a person get to see the headlight icon displayed in the top left corner of the screen when the light is actually turned on?
My display only goes to PO 1. 2. 3. 4. Why it's a e-bike U-1
My bike only goes up to pedal assist level 3 and PO1/6 I don't know what that means and It initialy went 20mp now it's going up to 35mp but I can't set it back to 20mp it's not going back I must be doing something wrong I don't know 😂
When i hold it plus and minus down it shows a the letter “c” and makes me input 4 digits which i assume means “put in the code”. Anyone got an idea of what i do?
There is a pin... try 2020 to 2023
Mine will not go higher than P3 how do I go higher so I can adjust my wheel size.
my panel does not adjust on my Hipatoo V8 20 inch bike. can you help me
P21 Bluetooth on off. 0 disconected, 1 conected. For nev wersion duotts C29 works ok.
I have a 350 watt tote guard ebike. Just had to have a new bafang hub motor put on after over 4,000 miles on the old one. But the new hub motor even tho it is still 350 watt feels weak and slower than the old one that had alot of miles on it. Maybe these settings will help.
The only ones that pop up for me is p1, p2 and p16
How to to get it faster ??
How do I access these I only see p02 and p16??
Hi please tell what to do if ur ebike keeps showing E07 after riding 2-3 KM N STOPS RUNNING ON BATTERY
Have you figured out the problem yet?
According to the display manual, the E-07 code is "motor failure"
I only have up to P6 im missing p3 and p5 i don't know my ebike is a qlife racer.
Mine will not go past P 3, any ideas?
Do you know why I can only access P02 and P16
On top of the battery display what is that? I see it on mine sometime is full and sometimes it’s not does anybody know?
It is the power output gage. Full bars is maximum power output.
Anh kne ha e a fix for error code E08
how to increase the speed ?
when I did these settings, I noticed that the voltage setting was set to 52 from the manufacturer, but my battery is a 48v 12ah, why the company did that? Should I set it to 48v?
Yea if you have a 750 watt and a 48 volt it should be at that witch is 48volt a 52 volt is a bigger motor size witch runs on a 52 volt
I changed speed to 50 and it only went 25
How can you make the bike go faster
P8 higher
i increased p8 and now i have 5 assist bars but it doesn’t go any faster
Try setting p8 to 67.
Not sure why but it seems to work as an over-ride
What happens if i change the voltage what would happened please help me i just bought the bike and it was my birthday gift and I'm scare i accently broke it
If you haven't ridden it on the wrong voltage it should be ok. I would recommend changing the setting back as soon as you can though. If you read through the previous comments I provide the full code settings. Here is the manual: edbikes.co.nz/wp-content/uploads/2019/10/LCD-G51-Manual-1.pdf. You can change the voltage via P3 setting. Depending on your model of bike it will most likely be 36V or 48V. My bike had a 36V. If unsure it should be written on the battery (36V 10Ah) something like that. If you still can't figure it out then I would suggest taking it to your local bike shop who could fix it for you.
Thank you so much
And factory reset?
what if the computer started with setting points p11 to p20, but for reasons I don't understand, after about a month it now only has p11 to p16? The cruise control was working fine and now it doesn't work. why could this have happened and how can I fix it?
You may have done a factory reset by mistake. See manual here: www.scribd.com/document/535837513/manual-lcd-display-g51. Is the screen asking for a passcode? I believe some require passcode of 2020 to get into full display settings. Unfortunately I no longer own this bike with the G51 display so can't check my display to work out what happened.
@@nextgene-rides7522 No, I don't know anything about any password and the screen didn't ask for anything. I wouldn't even know where to enter the code. When the cruise control was in operation, it was activated by simply turning the throttle some secs. And i cant reach p17 settings no more.
Dont touch that, dont touch that. What if its already touched. Whats it supposed to be. Didnt explain much
The video is primarily for speed display settings but here is a link to the display manual which I used as a reference. edbikes.co.nz/wp-content/uploads/2019/10/LCD-G51-Manual-1.pdf.
The full parameters are:
00 - factory reset, 01 - Display screen luminance 1-3 (3 brightest)
02 - unit of mileage i.e. km/h or m/h,
03 - Voltage grades 24,36,48
04 - Sleep time for display (1-60),
05 - pedal assist grades factory setting is only levels 1-3, second setting is to increase to levels 1-5,
06 - Wheel size unit in inches
07 - Speed measuring magnet 1-100
P08 - Speed limit 0-50km/h. I think the max speed is 32km/h with this model.
P09 Zero start & Non-zero Start. 0 is Zero Start, 1 is Non-zero Start
P10 Driving mode.
0: driven by PAS. Throttle is useless at this time.
1: driven by Throttle. PAS is useless at this time.
2: driven by PAS & Throttle. Throttle is useless at Zero Start status.
P11 PAS sensitivity. Range: 1-24
P12 PAS start strength. Range: 0-5
P13 PAS magnet type: 5, 8, and 12.
P14 The Current-limiting of Controller. default is 12A. Range:1-20A
P15 Unspecified
P16 Reset ODO. Long press for 5s, ODO could be reset.
P17: (Customer Designated) Auto Cruise Option.
0: No Auto-cruise
1: Auto-Cruise On. Trigger time of auto-cruise is decided by the controller.
P18: (K5S, APT Protocol Bound) Throttle Level Option.
0: No throttle level. 1: Has throttle levels.
P19: (K5S Protocol Bound) 6km/h Cruise Throttle Definition.
0: Throttle has no 6km/h cruise definition. 1: Throttle has 6km/h cruise definition.
Also note that I am not talking much about parameters that are best left as they are set. For example you wouldn't change the voltage as this would be correctly set by the factory before the bike is sent out. I am trying to avoid people changing settings best left as they are. Most people only change the PAS setting and max speed but any changes are at your own risk and may void warranty.
Mine just shows a C and 0000’s
Mine the same
Code is 2020 push the + - together then use the middle button then u could move digets to get to 2020 and shen u do push the middle button again to get to the P menu. good luck
When i do it i only have p1 and p0 nothing else why is this?
Idk same
Please help I was trying to put my bike in mph and I accidentally clicked random stuff
Hi
Best to download the manual and ho through each setting individually.
Thank you so much
I don’t have a p19 or 18
Mine only goes up to 6
What do I do if my chan pops
min only go up to 16 where my other settings
E10 error please solve the problem
I accidentally changed the volts and it won't turn on
Contact the manufacturer or the seller. Because, the manuals do not explain what all the settings mean or does. That way you can better understand how to set everything. And that way you don't think your bike is broken. For some reason the manuals do not come with the info about the settings and that's bad.
Anyone able to help with error codes e6, e7,e9 on a c29
Hi...it ask me a code ehen i pressi +-
how do you reset trip odometer on a kbo breeze?
What happens if you get e09 error
Hi Mark, The e09 error is a controller failure error. See G51 manual edbikes.co.nz/wp-content/uploads/2019/10/LCD-G51-Manual-1.pdf. There are no details on how to fix this but with an error it usually requires a through check of wiring (no damage or loose wiring). The waterproof connector pins can easily get damaged and through up an error code. If you cannot find an obvious issue it may need the controller replaced. Best idea though is to take it to a professional ebike shop and see if they can find the error and if under warranty contact the reseller.
Per entrare nelle impostazioni mi chiede il pin qual'è?
p08 doesnt really work.
It doesn’t make the bike faster?
как вы решили проблему ?
Please help
Dont you no how to change kmph to mlh
I so messed up something with the settings (newer ver display) that it stopped helping me when pedaling:( ok hard reset fix :D
I have same problem how to fix
It
Oh I solved it just by holding p16 - and then +
@@ndetta ok i fix this:) go to P16 press"-" button to 10 seconds. After this press "+" and"-" buttons to 5 sec = reset to default all settings...
@@vito74m yeah just had discovered it right before you wrote it but thanks it must help other people
When I go to settings on my newer model, it asks for a code. I’ve tried 1314, but that no longer works.
I can’t get my controller to go beyond p2
can we connect it to hx escooter h7 with proper wiring?