If you do not have a hair dryer, please let the mount sit for 72 hours on your helmet before riding or attaching your action camera. Using a hair dryer to heat the adhesive decreases the time it takes for the 3M tape to form a bond with the surface of your helmet to only 24 hours.
We recommend testing where you want to mount it on your helmet. The side of your helmet is usually the best spot, just make sure there’s enough distance for the string to reach your GoPro. Next, peel off the adhesive cover and apply some heat with a blow dryer or heat gun so the adhesive becomes sticky. Then stick it to the desired position on your helmet. Once it’s secure, loop the tether string through the anchor point and tie it to your GoPro housing or thumb screw.
I’m new to this stuff but what is that attachment part on the go pro called? How does it connect to the bottom of the GoPro? Is there a case or something
Heat does not "kill" the type of 3M VHB Tape we use. Heating the 3M increases the strength and speeds up the time it takes for the 3M tape to form a proper bond with the surface of your helmet. By using heat the bond timeframe is only 24 hours, without heat, it takes 72 hours to form a full bond.
@@antgoescrazy6119 It doesn't need a case. If you wanted it to be in a case, we recommend our top opening case for easy battery changes. chinmounts.com/collections/accessories/products/top-opening-case-for-gopro-9-10-11
Have one for my rf1400. Works perfect.
Thanks for your support!
Still works?
Is the slide in includen or only the mount
I ride really rough on my dirtbike off roading and I can never trust for my camera to stay on any tips?
I rock your mount BEST ONE ON THE MARKET! 💪🏽🔐💯
Thanks for your support!
How long are you using it now? Does it still hold?
Nice & so simple
Ikr
Just got one for this helmet
Thanks for your support!
Is it good?
Thank you sm
Have you ever considerd sponsorship with riders?
Propre 👌😍
১ জন ইউটিউবার হিসাবে পাশে আছি পাশে থাবেন আশা করি।
Do you absolutely have to buy the J-fastener for your product to go on the product that sticks to the helmet for it to work?
If you want to make adjustments to your camera angle it is recommended
My chinmount has a slight gap (no contact w/ helmet) at the right bottom, worried it might come off :/
Sounds like you might be installing it incorrectly. Please email us at info@chinmounts.com for assistance.
I got the one that came with the go pro although it’s not curved
The mount that came with your GoPro won't fit on the chin of your AGV K1.
How low iq are you.
Just bought one for my new helmet SCORPION EXO 520 EVO AIR LATEN BLACK RED
Thanks for your support!
Merry christmas guys ❤❤❤❤❤😢😊😊😊😊😮😮😮😮😅😅😅😅🎉🎉🎉
Merry Christmas 🎅
Where i found the gopro support to attack it on the chin mount?
Here: chinmounts.com/products/universal-accessory-pack
Is it really hard to remove? I am scared to just only stick it there also on top of the helmet
It can be removed by applying heat with a blow dryer and slowly twisting it off your helmet.
Or it could be removed by falling off over time 👍🏻
Does it have to be 24hrs or can you leave it for like 8 hrs
Has to be 24 hours
Where can I find the attachment that holds the camera and connects to the chin mount? Have a link? Please I would really appreciate it
chinmounts.com/products/universal-accessory-pack
Does stick potentially demage the helmet? Or can it be removed all times without leaving a mark?
Can easily be removed without damaging your helmet. Simply heat the edges of the 3M adhesive with a hair dryer and slowly twist it off your helmet
@@chinmountscan it be re-applied after being taken off?
@@sebmesman7406 You will need to replace the 3M tape as it's not designed to be reused.
chinmounts.com/products/replacement-3m-vhb-adhesive
Bro i am scared whether it will come off is the glue strong
Just follow our installation instructions and you'll be good to go: chinmounts.com/pages/installation-instructions
DJI Osmo Action 4 ile uyumlumu
You will need this attachment kit to use your DJI Osmo Action 4 with our Chin Mounts: chinmounts.com/products/universal-accessory-pack
shame the camera is off center but otherwise nice
gopro version please. :)
This works with all GoPro's
Do you have any accessories for OGK KABUTO F17?
Not at this time
@@chinmounts I hope that the accessories for the F17 will be available.
It will fall na ? In higher speeds ?
It won't
how long should we heat with the hair dryer
10 seconds max
Whats the name of chin mount and where to buy.... help me guys
You can order it here: chinmounts.com/products/agv-k1-action-camera-chin-mount
The part that attaches the gopro to the mount how do i get it?
chinmounts.com/products/universal-accessory-pack
Can I use it to mount mobile phone
Why tf would you mount a f'in mobile phone to your helmet. Buy an action camera
Is the dryer necessary
If you do not have a hair dryer, please let the mount sit for 72 hours on your helmet before riding or attaching your action camera. Using a hair dryer to heat the adhesive decreases the time it takes for the 3M tape to form a bond with the surface of your helmet to only 24 hours.
how can i mount my insta360 ace pro?
You will need this attachment kit to clip your Insta360 Ace Pro into our Chin Mounts: chinmounts.com/products/universal-accessory-pack
So where do you install the safety tether?
We recommend testing where you want to mount it on your helmet. The side of your helmet is usually the best spot, just make sure there’s enough distance for the string to reach your GoPro.
Next, peel off the adhesive cover and apply some heat with a blow dryer or heat gun so the adhesive becomes sticky. Then stick it to the desired position on your helmet.
Once it’s secure, loop the tether string through the anchor point and tie it to your GoPro housing or thumb screw.
do you ship to easter europe too ?
Yes
@@mowglee4567 damn f them then thank you for telling me 🫂❤️
Is there something special on the GoPro needed to attach to this mount? The bike I bought came with that sticker part on the windshield
is this mount tightly attach with gopro.......?
Yes
Can i order it from india for my axor helmet
Yes, you can order to India.
Here are the Chin Mounts we make for Axor helmets: chinmounts.com/collections/axor-helmet-chin-mounts
Can i order that' im from phillipines
Yes, you can order it here: chinmounts.com/products/agv-k1-action-camera-chin-mount
Is that the whole package camera mount for any model of go pro? Thanks in your assistance
How much the camera mount package
For my AGV
thanks again
@@ramonorasa7703 Our Chin Mounts are $35
I’m new to this stuff but what is that attachment part on the go pro called? How does it connect to the bottom of the GoPro? Is there a case or something
chinmounts.com/products/low-profile-buckle-mount
Please give link to buy
chinmounts.com/products/agv-k1-action-camera-chin-mount
works for all gopros?
Yes :)
How to get it out of USA ?
We ship worldwide. You can order it here: chinmounts.com/products/agv-k1-action-camera-chin-mount
during fast it falls......?
No
you know heat kills adhesive right
Heat does not "kill" the type of 3M VHB Tape we use.
Heating the 3M increases the strength and speeds up the time it takes for the 3M tape to form a proper bond with the surface of your helmet.
By using heat the bond timeframe is only 24 hours, without heat, it takes 72 hours to form a full bond.
Link to buy please
chinmounts.com/products/agv-k1-action-camera-chin-mount
Is there any hood one for mx helmets
Which MX helmet do you own?
Do you chip to Europe, in my case Portugal ?
Yes, we ship to Portugal!
Hope it’s not printed with pla
Of course not! We use ABS
How long battery last?
Battery?
Battery of the GoPro
Price
All of our Chin Mounts are 35 USD
chinmounts.com/products/agv-k1-action-camera-chin-mount
Please have video mount GoPro vertical?
Wow
How to get it bro
You can order it here: chinmounts.com/products/agv-k1-action-camera-chin-mount
Thanks bro
But I am from India
@@GurcharanSingh-pv6ff We ship to India
How to buy ?
chinmounts.com/products/agv-k1-action-camera-chin-mount
Link not working give the site address
Send amzon/flpkrt link ASAP
We don't sell on Amazon but you can order here: chinmounts.com/products/agv-k1-action-camera-chin-mount
What model go pro is that
GoPro Hero 10 but our Chin Mounts are compatible with all GoPro models
Référence du suport ?
where do you get that “neck” for the gopro itself?
chinmounts.com/products/accessory-pack
Comes with the GoPro..
¿Where can I get that base for the go pro?
chinmounts.com
is it available for “origine tonale” helmets
Unfortunately not at this time.
what size helmets does it fit on?
This mount is made for the AGV K1 and fits all sizes of that model. Do you have an AGV K1 or a different helmet?
Bagaimana cara membelinya sedangkan saya di Indonesia
belinya dmna ini
video for hjc rpha 11 ?
ruclips.net/user/shortsQRmpjrfX8aM
pice koto
I need this helmet please tell me where to get it.please please please 🙏🙏🙏
??? Look up different helmets and find the right one for you.
What about the mike for sound ? I just got 1 gopro 9.And don,t know setting please help ❤
Is it save to just sick it 🤨
Safe* stick* learn english.
Türkiyeye gönderim yapıyomusunuz ?
Evet yaparız
Üstad. Malzemeyi aldın mı? Nerden gelşyormuş?
@@AhkekU Çene Bağlantılarımız Kuzey Amerika'da üretilmiştir
Fiyat nedir
@@ahmetsaglam6998 35 USD chinmounts.com/products/agv-k1-action-camera-chin-mount
I love how everyone just assumes we have blow dryers
Bruh it cost $10💀, so you can afford to buy the GoPro and the helmet but can't afford to buy some cheap ass blow dryers?
You can get a blow dryer for like 5$ lmao
Y’all right I’m wrong 🥲
i used a lighter to heat mine up@@cheemsburger6117
@@CokeOnDaRocksIt doesn’t matter who’s right or wrong, what matters is that we, as a society grow and do good in life
Where do you get the piece to attach the go pro to the helmet mount ?
chinmounts.com/collections/accessories/products/accessory-pack
Does the gopro have to be in a case? If so what kind
@@antgoescrazy6119 It doesn't need a case. If you wanted it to be in a case, we recommend our top opening case for easy battery changes.
chinmounts.com/collections/accessories/products/top-opening-case-for-gopro-9-10-11