Audi TT Chassis restoration and engine bay tidy up
HTML-код
- Опубликовано: 31 янв 2021
- I take one of the cleanest TTs out there, and make it even cleaner!
This video focuses on the work me and Paul undertook on Super TTed to get the underside as clean as the body work. We also did a bit of work in the engine bay, tidying up parts, removing others, and changing the rocker cover (for the 5th time!!!)
***For booking enquiries email bookings@bwstt.co.uk
***If this video has saved you a trip to your local garage, and you'd like to buy me a drink to say thankyou, then feel free to send me a donation to paypal.me/bwstt225?locale.x=e...
Video Link: • 15 Minutes Royalty Fre...
Music provided by Johnusworld - Music for Video Creators
Creative Commons - Attribution 3.0 Unported 
Хобби
Well done
One of the great things about owning cars in Australia is that we just do not get any corrosion underneath the car - none. After 19 years on the road and 150000 miles, every metal part underneath my TT is squeaky clean (and I removed the plastic undertrays years ago for ease of maintenance). But you always have to pay the piper somewhere..... Our interior plastics get hammered by UV and the hot baking sun. Some European car interiors just become a sticky, perished mess. My old Alfa 147, for example.
As usual brilliant work mate thanks 👊
POR-15 works really well doesn’t it, I was pleased with how mine came out. Nice work 👍🏻
Nice work!
Nice job mate 👍🤩
Brilliant video....not jealous at all.....😉😉
The support on this video has been amazing! I promise to keep the content coming, see you on the next one!
Instablaster...
do you have part numbers for the bushings from the upper and lower control arms that are on the wheel side? I have the inner but if I'm taking them off i want to do both inner and outer.
Can you do a DMF on my 3.2 dsg , and the chains as well, if you can what’s the best way to make contact
Sweet looking car - I'd just be happy to have my rattles and clanks gone 😂
what are those front deffusers and if there are side skirt ones as well would be nice, they give your tt a more agressive look
What are you using to clean the diff. For it to come out so clean like that?
Do you have a video on how to take the rear subframe apart? I'm sure you had one but cannot find anymore. Cheers
That all looks very beautiful but the Haldex unit is cast aluminium, the bracket is cast aluminium, and the trailing arm is cast iron. Just change bushes when they fail, the subframe is super thick pressed steel. Only really the two pressed steel control arms need replacing when they're shot.
Front sub frames different story! 😮 But the lower arms again are cast iron.
I’ve seen rear subframes rot away, so worth keeping them protected too. I also don’t really see your point- when you see the level of detail in the rest of this show car, why wouldn’t he want the underside to be clean?
Bryn I would like this doing to my rear end looks like it was done in the day 🤔
My breather pipes have perished. What difference will new breather pipes make and a maf sensor?
What cleaner did you use in the Gearbox?
Super job. What paint did you use of the differential casing?
It’s called alumablast by Eastwood
Hey bws TT
You gotta video guide for rear subframe removal on the MK1 TT.... Lookin' for a guide to taking my Bora 4mo rear end out for full renovation! Thanks!
Coming soon
hi were can I buy cover under the engine bay
I really need U to work on my TT watching your videos as brought back the love for my car I stop driving it 2year ago.....Help
Excellent Video. Any chance you took more footage of rear subframe removal? It would be great to see this done. Cheers
I’ll be doing a proper how to on one soon
@@BWSTT Nice one matey!! Cheers
How do you get the Porsche coolant cap to sit straight across??
Thanks
Ocd
Did you do the subframe removal video? Can’t find it, need to restore mine 🥲
Coming soon
There's nothing wrong with using a paint brush to get into difficult places.
The good thing about thick paint is you can sand and spray top coat it clear.
How much time does it take to remove rear sub-frame?
Depends on exactly which method you use, whats seized etc. Im doing a how to video on that very soon
Also, did those subframe bushes need replacing? How can you tell?
They would have been ok to stay, but Paul wanted polybushes for aesthetic and performance reasons
@@BWSTT Thanks so much for this info. I will be paypalling you a small thx. Hugely enjoying your work. p
Thank you very much
Trying to ring you mate you never pick your phone up lol busy bee 🐝🤪
Been wanting this color blue. By chance could you give me the paint code on this as I'm looking at getting mine painted in the next week
Unsure of the code, its called sepang blue
@@BWSTT ok thanks. Also the paint code in these is in the spare tire well in case u ever needed it.
Nice wheels, what are they?
O.Z superleggara’s
Compared to the BAM... that 180 engine is a nightmare to stuff a TIP on...
SiliCONE coolant tubes are porous...they leak coolant and oil. Burning out the bushes is unnecessary, heat them a bit yes, the rubber melts, then they hammer out. Less damage to the subframe metal that way (you are changing the heat teatment of it). The PCV system you are 'deleting' with a catch could cause big issues if you get it wrong. It is carefully designed to regulate the engine pressure properly. When you torque bushes for the suspension, the weight of the car must be on the bushes. I don't know how you've done this since the car is only on axle stands.
Thanks for showing you know a thing or 2, and thanks for assuming I don’t. For a start, you inly need the weight of the car on rubber bushes, to stop preload in the bush. Polybushes don’t require this, as the crushtube is what youre torqueing against, and the bush moves independently of this- by design. If i do install standard bushes, i have 4 1 foot high plinths i lower the car onto to be able to torque up. Now given that we have proven my knowledge on one point, do i really need to do the same for the rest?
Any chance you can work on my car? I’ve had couple people let me down and my cars been sitting for a couple months. I’m based in Cambridge
I’ve used bryn 3 times over the last few months
All I’m going to say is he knows his shit
Nice fella too
@@julesmatthews2178 I’ve tried to email him a couple times but he hasn’t responded
@@analogrich I will message him for you 👍
@@julesmatthews2178 thank you Julian
@@analogrich I’ve messaged him pal
you are in safe hands 👍
180 or early 225?
180, no TT 225 has this bay layout
@@BWSTT Thanks , never seen a 180bay. Did the early 225 have a sai?
@@MRPK1967 yeah the apx did
decent job mate, the 1,8T motor is so ugly in stock form !
Audi TTs fit nicely in the car crusher
As you would, in a coffin. That doesn't mean you have to get in, FYI.
@@4L10 is that a veiled threat bro?
@@baitse7676 On the contrary, it was an obvious help. I possibly saved your life by telling you to NOT get in a coffin just because you would fit nicely in one.
@@4L10 as you would in a dumpster
@@baitse7676 Accept the gentle burn bro. Too late. :D