Its really very helpful video. Could you please also provide the information about the 2D and 3D modelling of the Si-ring resonator? How to find the transmission spectrum for different wavelengths ?
I uploaded the parameters file of this simulation via this link: mega.nz/file/Ne1RDDQA#Ewi1lRUu-CSX3fyc2Nu1SIQkgAdPsSBMt_eRSRARw6s For the various materials parameters, you can use this link: refractiveindex.info/
sir, i followed the steps but couldn't define Silicon. so cross is still on material. after 8:30 cross has been removed in the video but it couldn't be on my comsol work.
How to do simulation for transmission spectrum of waveguide? I dont know how to plot it. Can you make a video on fiber optic spr sensor. I would like to know how to plot the spr dip with changing external refractive index. Thanks.
@EMSpectrumLab, could you give steps to simulate Electromagnetic Mode Analysis of Hybrid nano composite micro wave absorber please @ composite microwave absorber
Hi Sir, thanks for this wonderful video👍. I'm working on periodic dielectric gratings and followed all the steps from the video. However, I can't find the correct modes using mode analysis (I know the expected mode profiles). When I added an eigenfrequency step, it successfully found the modes. It seems like the solutions from the two methods don't match. Could this be due to using the wrong periodic condition (I'm using continuity condition)? Do you have any suggestions?
Thanks for your comment. I really cannot comment about your issue. But some problems originate from wrong boundary conditions. In your case, I think continuity BC is correct, but if you had the excitation in oblique incident you should use the Floquet BC.
please give a video on the design of rectangular patch antenna by the micro_ribbon(feed line) at 2.45GHz frequency (you have to see the reflection coefficient S11 the peak in the frequency 2.45GHZ) with the calculation of the precise dimensions of the patch antenna and how to use the wave guide port in the design of the patch antenna and how to make the ground and the patch by the copper in the HFSS software you want to help me because I find difficulties and thank you for moving forward
Thank you for the video.. Can I get some information about Photonic crystal waveguide simulation? Actually i have to measure the group velocity of the light propagating through the pCW.. for which i need graph of normalized frequency vs normalized wave vector
Its really very helpful video. Could you please also provide the information about the 2D and 3D modelling of the Si-ring resonator? How to find the transmission spectrum for different wavelengths ?
Thanks for your comment. I'm working on the simulation of such 2D structure, it will be published soon.
How to download the document of parameters?Is there some website can get parameters of various material matters?
I uploaded the parameters file of this simulation via this link: mega.nz/file/Ne1RDDQA#Ewi1lRUu-CSX3fyc2Nu1SIQkgAdPsSBMt_eRSRARw6s
For the various materials parameters, you can use this link: refractiveindex.info/
sir, i followed the steps but couldn't define Silicon. so cross is still on material. after 8:30 cross has been removed in the video but it couldn't be on my comsol work.
When you define "Wave Equation 2" select core layer (silicon area) for this feature and also deselect this area for SiO2 in materials tab.
How to do simulation for transmission spectrum of waveguide? I dont know how to plot it. Can you make a video on fiber optic spr sensor. I would like to know how to plot the spr dip with changing external refractive index. Thanks.
Yes, I will record a video for this topic in the near future.
@EMSpectrumLab, could you give steps to simulate Electromagnetic Mode Analysis of Hybrid nano composite micro wave absorber please @ composite microwave absorber
Hi Sir, thanks for this wonderful video👍. I'm working on periodic dielectric gratings and followed all the steps from the video. However, I can't find the correct modes using mode analysis (I know the expected mode profiles). When I added an eigenfrequency step, it successfully found the modes. It seems like the solutions from the two methods don't match. Could this be due to using the wrong periodic condition (I'm using continuity condition)? Do you have any suggestions?
Thanks for your comment. I really cannot comment about your issue. But some problems originate from wrong boundary conditions. In your case, I think continuity BC is correct, but if you had the excitation in oblique incident you should use the Floquet BC.
how to do this in hfss or cst? Please make a video using CST too. Thank you.
The simulation process is the same, but in CST and HFSS you should draw 3D waveguide structure instead of waveguide cross-section.
Thank you for your video Sir. Sir what will be the mode analysis for same ridge waveguide coated with 2D material nanosheet
kindly guide
It is similar to what I showed in the video.
please give a video on the design of rectangular patch antenna by the micro_ribbon(feed line) at 2.45GHz frequency
(you have to see the reflection coefficient S11 the peak in the frequency 2.45GHZ) with the calculation of the precise dimensions of the patch antenna and how to use the wave guide port in the design of the patch antenna and how to make the ground and the patch by the copper in the HFSS software you want to help me because I find difficulties and thank you for moving forward
Thank you for the video. Its really very helpful. could you please provide optical fiber grating for mode analysis?
Thanks for your kind comment. I try to record a video in the near future.
sir how to convert this same structure into 3D and coat different material on top of it
You need 3D dimension and draw the waveguide with finite length.
Thx
Thank you for the video.. Can I get some information about Photonic crystal waveguide simulation? Actually i have to measure the group velocity of the light propagating through the pCW.. for which i need graph of normalized frequency vs normalized wave vector
I will record a video for PCW in the near future.
can we find shielding effectiveness of the material
I think you cannot
I like your Persian accent . Are you Persian?
@@aliaskennedy7897 Yes, I am Persian😉