I bought the Ridgid to better organize my most used tools while doing home renovations a few months ago. It mainly stays in my shop or home so I can put my tools away when I'm done working. I occasionally take a set of tools to my church to work so I'm sure this will serve me well for what I'm using it for. I really wanted the Milwaukee but couldn't justify the extra cost for just a Diy'er and woodworker. Solid review of these two systems. My advice is buy what you can afford at the time. I definitely didn't want to go with the cheapest like Husky or Stanley. I usually try and buy middle of road tools for what I use them for. Occasionally I'll spend the extra to get something of higher quality. I have Bosch drills, cordless circular saw and sander and DeWalt miter saw and angle grinder. I have learned that it's better to not buy the cheapest out there ever but you don't always have to buy the most expensive either.
I have the world's cheapest angle grinder and never minded. My miter saw is quite nice--a Ridgid back when they were the only ones with a shadow line. (I cut small diameter firewood with another cheap one.) My cordless drill, cheap, but hammer drill (corded) is a Bosch.
Put some shims/spacers to prevent the pinch points. This is expected by something made by Zionists. They want everyone to be uncomfortable and suffer. It is a nazi tradition and they are the enemies of humanity after-all. But it is a better system and is more reliable than the others.
Well I dont see how any tool box is tougher than Ridgid box. My son left the same kind of box you had on the top of you boxes in front of my truck parked on the street. I ran over it in my truck and the only damage was on the road it's self, a big gouge of asphalt, box didn't even have a scratch on it. They are made from a military grade epoxy. You know there strong when you first open it up and get a whiff of the curing epoxy. I have a few boxes, and bang for the buck is ridgid with life time warranty. Unless you are old and rich than the pack out is a great choice. One thing if you need a tool out of the ridgid bottom box , all you have to do is unlatch the box on top of the box you want to get to. Than lift the other boxes by grabbing both box connectors and lift two or three boxes together. Plus the ridgid boxes dont have much use to them, or they just hold up great. The new ridgid comes with a removable handle on the bottom box and each box comes with two wall mounts. Again life time warranty.
Started with the Ridgid box set a few years ago, then they started the packout and being a milwaukee fan it took me a while to make a decision, but I think that handle helps sell it to me, I know how that pinch feels when you layer on boxes. Keep it up!
I started with Ridgid and I am not changing. I think the latches that lock the boxes together are the absolute best and I have never had anything break. I have made my own work bench / tabletop that latches in place. I hope Ridgid does come out with some half tool boxes.
No doubt the Milwaukee is better and they charge accordingly for that. That said I've used my Rigid stack day in and day out for over three years now and it's served me very well. I use the basic three and the clear top organizer making It four for a long time. I have a block I put behind the handle and grip it under hand with one hand and use my spare hand to stabilize holding onto the organizers unused side connecting clamp. I'm an electrician and load this way to successfully avoid being top heavy. The large bottom box has my DeWalt cordless gear. Drill, impact, sawzaw circular saw, multi tool, work light, bits, blades, batteries, four port charger, four way, and a drop cord. Serves as a good base for sure. With the tool box I ditched the tray for added space but it has a bag of less commonly used hand tools, another bag of wrenches, t handle allen's , sockets, and slug out kit, and across the top of those bags are my belt with it's pouches loaded with my EDC hand tools. Again. Lots of weight in the bottom two boxes. The solid top slim box only has test gear, rhino labeler, sharpies, pencils, locktite, de ox, and other specialty tools and literature. Lastly the clear top is all just connectors, wire nuts, straps, ect Served me so well I just bought another 3 piece. Almost got the packout but went rigid again. Took the money I saved and got a battery powered band saw, framing gun, and rotary hammer the stick in the bottom, middle is just assorted electrical boxes and random things and two clear top organizers for large assortment of fasteners. Either way you can't go wrong.
The rolling and the medium packout boxes allow you to put a divider in. So i cut and sanded a 1/4” piece of plywood and slide it in to divide tools and parts.
I have had the Ridgid set for about 6-8 months. I’m a welder in and out of boiler rooms up and down steps. And today the handle for the rolling cart just ripped off while picking the boxes up the steps. Will be buying Milwaukee tomorrow
Why would you over stack it and then complain....it's not made to be over stacked...I use mine for DJ equipment and after 4 years it all holds up. Good video
I have been looking for a tool cart system for my DJ stuff. Sounds like you've had good luck with the Ridgid so I'm gonna pick one up. Unlike a contractor I don't have to keep stacking higher, so the 3 boxes as it comes will be just fine.
@@ptfd140 I have the rolling cart and 2 of the medium tool boxes and 2 of the suitcase style cases. Suitcase I use to carry my cordless mics 2nd one is for adapters small cords, tool boxes are for lights and extension cords, xlr cables and rolling has more of the same.
Sorry I'm late to the party. I actually bought my Packout system for live stage use. Guitar, mic, and speaker cables on the bottom as well as mics. Center is 3-drawer unit with tools, strings (guitar and bass) extra things like straps, etc. Top is a cleat organizer for hardware, picks, and other oddball items. Definitely cheaper than road cases, and less heavy.
@@ptfd140 Packout has drawers which are spectacular. Less having to take boxes off in the limited space we have where we're allowed to set up, plus MUCH easier to grab on the fly. Packout it more expensive than Rigid, but cheaper than road cases.
I was struggling whether to spend the extra $ for the Milwaukee, but went with the Ridgid. Because get this, my Milwaukee Sawzall fits better in the Ridgid crate box than the Milwaukee crate box. The Milwaukee is wider, but the Ridid crate is longer.
@@HANDYMANHEADQUARTERS you are correct sir and damn they are proud of it 189.00 George Washington's guess I'll keep bungee straping my craftsman vac that sorta fits. Thanks for looking out though
Affordability isn’t an issue, it’s just a needless expense to buy plastic tool boxes when you can get an incredibly similar product for half the price. When you could buy twice as many plastic toolboxes, and all it’s good for is to hold your tools...it just seems like a needless expense
foam inserts are useful if you have test equipment that you don't want to break - I do a lot of data forensics and cyber investigations in the field and carry around a lot of equipment for disk imaging and system analysis that is very expensive and likely to break if it's handled too roughly. I also carry a toolbox with the items needed to work on computers and in data centers and boxes of cables etc where I certainly don't use foam inserts but my network scanners, laptop, disk imagers, cable testers etc. are all packed in foam. also if you work in an area where tool accountability is critical (i.e. working around jet engines) - you want to know that you have all of your tools every time you leave the jobsite and foam cutouts makes that easy. foam inserts probably aren't needed for most people doing construction but it does have it's place for some of us. I use the dewalt 'ToughSystem' which has a detachable handtruck (much more versatile) plus all of the boxes can be rack mounted in the van using their racking system so nothing slides around in transit; fwiw: "Pelican" is the 'go to option' lots of people carrying sensitive test equipment and they are great for that purpose however those are not modular/stackable systems and I always need tools AND the test equipment so while this isn't perfect it handles both quite well and makes it pretty easy.
My bosses Milwaukee Boxes tip over all the time when stacked that high. I have the Ridgid boxes and they work just fine. I do like Milwaukee's latch system better but not enough to justify the cost.
Only reason I use ridgid is because they sell a compact rolling toolbox. Fits great in my car along with one box and a crate. If Milwaukee sold a small roller that could have fit in my trunk easy I honestly would have just gotten that
you can put both bags on top, take the thin Box and snap it on so its halfway hanging over the edge, then put the 1/2 back on the other half that's the thin is not covering and the full-sized bag on top the full-sized Thin box
All three ridgid, Milwaukee and dewalt 2.0 modular tool box systems are made by the same company... it's all really fits in your budget.. I have both ridgid and Milwaukee and love both tool box systems.
I own three Ridged’s setups and are really good plus great on the bank account . My handle is a lot stronger then your one you were moving around . The crate is great for loses items . Yeah I learned like you the more you put on it gets heavy and does put pressure against your hand if your moving it around . But I’m glad I waited and didn’t buy the packout . With the packout draws coming out are the way to go . Both systems stink for loading and unloading .
@@HANDYMANHEADQUARTERS I have one Stack just full of paint equipment which is nice makes them light to move around and everything is not spread out in 🪣 buckets or 📦 boxes .
I love the Ridgid I never had any trouble with mine at all.Not 1 problem,don't know what this guy does with them ,he sure making everything look really hard,what is he doing
The Rigid box system offers much higher value. If the Milwaukee was made of a different material like like fiber glass injected plastic or pure fiberglass composite then it would be a different story.
Unless you are working on flat floors I find that the boxes can be more trouble than they are worth let alone going on a higher floor of a unfinished building
The prices sure went up in 2024 !!! . You're looking at $400 plus for the Milwaukee setup!! The Milwaukee is too bulky. The Rigid is better and easier to stack and unstack to move it. You can't carry a whole stack in anyways ! The big problem is that once you're working in an apartment or home, you want to have an instant work station once you restack the boxes. They both missed the mark because you need a flip out bottom like Stanley made years ago and drawers , and the top box just opens normally. The Stanley came apart in 3 sections, great design, but they were not durable, and the small wheels weren't any good either. Had the Stanley rolling setup been made slightly bigger and durable, that was best design !! .👍
Both are made by the same manufacturer. My Ridgid cases are superstars. I’ll admit the like the drawers in Big Red. I assume - I hope - Ridgid introduces drawer units soon.
The way I see it there’s no need to put my Milwaukee in anything but pack out. You get what you pay for these days and if your making money on it you don’t want an inferior product. I’m sure the rigid will keep a rigid tool safe if you get my drift. Good review.
I was going to get the Rigid because of the price, but I knew I'd kick myself later for not getting Packout, especially now that it has drawers. Kaizen foam is great for the drawers, or if you want to set a small box up for drill/driver kit with bits. Keep up the good work!!
The Packout system is definitely the most versatile. As far as durability? I've reviewed many test videos concerning this, and a good portion has the AEG/ Ridgid beating out the competition ( although close). As far as mods. - there are a few vids on RUclips showing modifications to the Ridgid system. Haven't seen any for Milwaukee. Then again Milwaukee has so many options, I don't think u need to modify. Personally I have the Ridgid system ( no, no Ridgid tools, mainly Metabo/ Hitachi). They do what I need, so I really can't justify spending over double. Rather have another tool.
I am a big fan of Milwaukee tools and it’s not long that I have had the Milwaukee packout 3 boxes like yours but the only difference is are all black here in the uk 🇬🇧 but I think these Milwaukee packouts are the best yes they are expensive just wish we could have red sets here in the uk 🇬🇧 stay safe 👏👏👍
I own all Milwaukee cordless tools but for $99 you cant go wrong with the rigid. its durable beyond need, its easy to clasp on and off(is it the simplest? no) but its easy. Cant go wrong. Who know maybe theyll come out with a drawer system like the packout. As a carpenter my not be applicable for my needs.
My boss is a Milwaukee finatic and had about 10 different packout sets and only had Milwaukee tools. I don't like Milwaukee myself, but as far as the park out, it is untouchable, bar none. As far as some of the tools, we won't get into that.
The ridgid is good for bigger bulkier items, the Packout is just better at organizing, So many more options. I guess Ridgid just relies on price point for sales. DeWalt is in the middle as far as price and options.
Which is more durable, I don't know. All I can say the Ridgid boxes I have held out great. I will point out, all I have used is large and small toolbox (Pro Organizer). The Packout is maybe be more versatile compared to other available systems, but it's not versatile enough to fit my needs; therefore Milwaukee won't be getting richer with my money.
I have the Ridgid system and it works for me. Generally speaking the more expensive systems will be better. But some of us have a hard time justifying the expense. My grandfather was a master carpenter and would roll ove in his grave if he knew what I paid for the Ridgid system.
I'm sorry I think a lot of guys just like spending money. The red system is good but not 2.5× as good. Yellow is behind red with upsales and junk. Gray is just a no. So its down to orange 2.0. I think if they had a drawer in there system it would be best band for the buck.
I got the DeWalt tough system 1.0 on sale got the bottom rolling box $59. The xl box $39 the small box $35 got a Milwaukee ultimate job site backpack alsp got a awp tool bag a cheap canvas rolling bag and Bosch small canvas tool bag it works for my needs but I wish I could have the back out my budget did not justify it and the wife can't forget the wife if she not happy well no new toys for me lol 🤣
The rigid handle bent on me the first day with a light load. It is no longer capable of collapsing. It's junk n my opinion. The plastic boxes are good quality so it's too bad they cheaped out on the handle.
@@HANDYMANHEADQUARTERS I thought it might be better than it looked because of the Ridgid name and surely Ridgid wouldn't put their name on something below Kmart quality but I was wrong. I will have to make some kind of a handle for it.
With the ridiculous price that the aeg quickstacks have been going up they have just shot themselves in the foot because they have made it so much easier for people to go with milwaukee packout or even dewalt tough system 2.0 now. I wont sick with aeg/ridgid now the price hike is insulting.
Milwaukee button never works right,And they r so over priced but they know the fan boys will buy them.I would take the Ridgid if they were the sane price.True story
is it really that hard to put drawers on the fucking thing? the world really needs an affordable option to the pelican toolbox ,come on Milwaukie make it happen
This was a great comparison and it helped me immensely. With the incoming Pro Gear Gen 2 some of your issues with the Gen 1 were dealt with. For the price I expected the Pack Out to be far stouter. The Gen 1 feels beefier and the Gen 2 looks about the same. I've seen colleagues with cracked Pack Outs. I prefer the larger system of the Pack Out but I think I'll check out the Gen 2 for my needs. Thanks again for your time in making this thoughtful comparison! Cheers!
Okay so you complain about two latches and struggled to tip it over.. also you can’t even figure out to turn your hand around to not pinch your hand.. like really
I agree the hamdle on the rigid is odd. I end up using it palm up when hauling it. I really like the milk crates just because they clip together. I have 6 in my work truck
Man you complain ALOT, a lot of whining. Not really a Comparison Review. Just change the misleading Title to Why I prefer the Milwaukee. Maybe think review through more next time.
Ridgid are rebranded AEG had ridgid and AEG tools as batteries are compatible never had one that didn't do the job or break daft Milwaukee just paying for a name. Not a sheep don't follow the heard
I bought the Ridgid to better organize my most used tools while doing home renovations a few months ago. It mainly stays in my shop or home so I can put my tools away when I'm done working. I occasionally take a set of tools to my church to work so I'm sure this will serve me well for what I'm using it for. I really wanted the Milwaukee but couldn't justify the extra cost for just a Diy'er and woodworker. Solid review of these two systems. My advice is buy what you can afford at the time. I definitely didn't want to go with the cheapest like Husky or Stanley. I usually try and buy middle of road tools for what I use them for. Occasionally I'll spend the extra to get something of higher quality. I have Bosch drills, cordless circular saw and sander and DeWalt miter saw and angle grinder. I have learned that it's better to not buy the cheapest out there ever but you don't always have to buy the most expensive either.
Thanks for comment. Exactly go with what you can afford! Please don't forget to subscribe to my channel. It would be much appreciated!
I have the world's cheapest angle grinder and never minded. My miter saw is quite nice--a Ridgid back when they were the only ones with a shadow line. (I cut small diameter firewood with another cheap one.) My cordless drill, cheap, but hammer drill (corded) is a Bosch.
Put some shims/spacers to prevent the pinch points.
This is expected by something made by Zionists. They want everyone to be uncomfortable and suffer. It is a nazi tradition and they are the enemies of humanity after-all. But it is a better system and is more reliable than the others.
Well I dont see how any tool box is tougher than Ridgid box. My son left the same kind of box you had on the top of you boxes in front of my truck parked on the street. I ran over it in my truck and the only damage was on the road it's self, a big gouge of asphalt, box didn't even have a scratch on it. They are made from a military grade epoxy. You know there strong when you first open it up and get a whiff of the curing epoxy. I have a few boxes, and bang for the buck is ridgid with life time warranty. Unless you are old and rich than the pack out is a great choice. One thing if you need a tool out of the ridgid bottom box , all you have to do is unlatch the box on top of the box you want to get to. Than lift the other boxes by grabbing both box connectors and lift two or three boxes together. Plus the ridgid boxes dont have much use to them, or they just hold up great. The new ridgid comes with a removable handle on the bottom box and each box comes with two wall mounts. Again life time warranty.
The Milwaukee pack out go for almost 300$ at home depot when not on sale just to clarify so it’s almost a 200$ price difference.
I would get it on sale!
Milwaukee is $300 Ridgid is $130 I ended up going with the husky $90
instablaster
@@perronchabelo7608 🤣🤣🤣🤣🤣
@@perronchabelo7608 yes! I’m a big fan of the Husky Connect system. Works great for my needs and has a lot of add on options.
A bit late to the party here but where you finding these for $100 and $200 the packout is $400 cad and Rigid is $270 cad
Started with the Ridgid box set a few years ago, then they started the packout and being a milwaukee fan it took me a while to make a decision, but I think that handle helps sell it to me, I know how that pinch feels when you layer on boxes. Keep it up!
Exactly. Just a better design in my opinion
I wish it was $200 for the three milwaukee boxes.
I love rigid , mad a lot of money with them
I started with Ridgid and I am not changing. I think the latches that lock the boxes together are the absolute best and I have never had anything break. I have made my own work bench / tabletop that latches in place. I hope Ridgid does come out with some half tool boxes.
No doubt the Milwaukee is better and they charge accordingly for that. That said I've used my Rigid stack day in and day out for over three years now and it's served me very well. I use the basic three and the clear top organizer making It four for a long time. I have a block I put behind the handle and grip it under hand with one hand and use my spare hand to stabilize holding onto the organizers unused side connecting clamp. I'm an electrician and load this way to successfully avoid being top heavy. The large bottom box has my DeWalt cordless gear. Drill, impact, sawzaw circular saw, multi tool, work light, bits, blades, batteries, four port charger, four way, and a drop cord. Serves as a good base for sure. With the tool box I ditched the tray for added space but it has a bag of less commonly used hand tools, another bag of wrenches, t handle allen's , sockets, and slug out kit, and across the top of those bags are my belt with it's pouches loaded with my EDC hand tools. Again. Lots of weight in the bottom two boxes. The solid top slim box only has test gear, rhino labeler, sharpies, pencils, locktite, de ox, and other specialty tools and literature. Lastly the clear top is all just connectors, wire nuts, straps, ect
Served me so well I just bought another 3 piece. Almost got the packout but went rigid again. Took the money I saved and got a battery powered band saw, framing gun, and rotary hammer the stick in the bottom, middle is just assorted electrical boxes and random things and two clear top organizers for large assortment of fasteners. Either way you can't go wrong.
Great organization!
It’s not better…..rigid is tougher…..I have all the major systems and prefer rigid
The rolling and the medium packout boxes allow you to put a divider in. So i cut and sanded a 1/4” piece of plywood and slide it in to divide tools and parts.
Great idea!
I have had the Ridgid set for about 6-8 months. I’m a welder in and out of boiler rooms up and down steps. And today the handle for the rolling cart just ripped off while picking the boxes up the steps. Will be buying Milwaukee tomorrow
Same happened to me!
Why would you over stack it and then complain....it's not made to be over stacked...I use mine for DJ equipment and after 4 years it all holds up. Good video
Yeah it does hold up!
I have been looking for a tool cart system for my DJ stuff. Sounds like you've had good luck with the Ridgid so I'm gonna pick one up.
Unlike a contractor I don't have to keep stacking higher, so the 3 boxes as it comes will be just fine.
@@ptfd140 I have the rolling cart and 2 of the medium tool boxes and 2 of the suitcase style cases. Suitcase I use to carry my cordless mics
2nd one is for adapters small cords, tool boxes are for lights and extension cords, xlr cables and rolling has more of the same.
Sorry I'm late to the party. I actually bought my Packout system for live stage use. Guitar, mic, and speaker cables on the bottom as well as mics. Center is 3-drawer unit with tools, strings (guitar and bass) extra things like straps, etc. Top is a cleat organizer for hardware, picks, and other oddball items. Definitely cheaper than road cases, and less heavy.
@@ptfd140 Packout has drawers which are spectacular. Less having to take boxes off in the limited space we have where we're allowed to set up, plus MUCH easier to grab on the fly. Packout it more expensive than Rigid, but cheaper than road cases.
Thanks for sharing. Can the milwaukee system's top open while stacked?
No because the handle gets in the way.
the middle one can open with the smaller box on top. The larger crate on the bottom (one with wheels) can't be opened with the other boxes on top.
I was struggling whether to spend the extra $ for the Milwaukee, but went with the Ridgid. Because get this, my Milwaukee Sawzall fits better in the Ridgid crate box than the Milwaukee crate box. The Milwaukee is wider, but the Ridid crate is longer.
Funny how that works!
@@HANDYMANHEADQUARTERS yes. 100% agree on the handle and more options with Milwaukee, but the crate size was the deal breaker.
Just bought the rigid system for 110. The Milwaukee was 310. For a basic homeowner the choice was easy.
Oh yeah it is plenty solid for homeowner use!
I like the Rigid but I'm going to use it on a really nice aluminum dolly
@LarryWebb-g5d yeah they were just all too bulky for my can. For a trailer I think they would be perfect.
Love the packout ans have them, but also have rigid on the farm that ride around in the back of trucks. They are rock solid and never get wet inside.
I love the ridgid milk crate because it holds any of my husky tool totes.
Thats cool
I need a packout with a cordless shop vac as a stack
Milwaukee makes a cordless vac that goes on the packout i believe
@@HANDYMANHEADQUARTERS you are correct sir and damn they are proud of it 189.00 George Washington's guess I'll keep bungee straping my craftsman vac that sorta fits. Thanks for looking out though
@@BaffledBelief yeah little steep for it to just clamp on vs. A .89 bungee cord
Affordability isn’t an issue, it’s just a needless expense to buy plastic tool boxes when you can get an incredibly similar product for half the price. When you could buy twice as many plastic toolboxes, and all it’s good for is to hold your tools...it just seems like a needless expense
I forgot to mention that I bought Ridgid when they were the only one, about a decade ago. Nothing has ever broken.
foam inserts are useful if you have test equipment that you don't want to break - I do a lot of data forensics and cyber investigations in the field and carry around a lot of equipment for disk imaging and system analysis that is very expensive and likely to break if it's handled too roughly. I also carry a toolbox with the items needed to work on computers and in data centers and boxes of cables etc where I certainly don't use foam inserts but my network scanners, laptop, disk imagers, cable testers etc. are all packed in foam.
also if you work in an area where tool accountability is critical (i.e. working around jet engines) - you want to know that you have all of your tools every time you leave the jobsite and foam cutouts makes that easy.
foam inserts probably aren't needed for most people doing construction but it does have it's place for some of us. I use the dewalt 'ToughSystem' which has a detachable handtruck (much more versatile) plus all of the boxes can be rack mounted in the van using their racking system so nothing slides around in transit; fwiw: "Pelican" is the 'go to option' lots of people carrying sensitive test equipment and they are great for that purpose however those are not modular/stackable systems and I always need tools AND the test equipment so while this isn't perfect it handles both quite well and makes it pretty easy.
Great insight!
My bosses Milwaukee Boxes tip over all the time when stacked that high. I have the Ridgid boxes and they work just fine. I do like Milwaukee's latch system better but not enough to justify the cost.
@@MWS67 yeah I hear ya!
Those Ridgid seals are very waterproof, I've kept one in the bed of my truck for months at a time with no issues.
Thats good to hear.
Only reason I use ridgid is because they sell a compact rolling toolbox. Fits great in my car along with one box and a crate. If Milwaukee sold a small roller that could have fit in my trunk easy I honestly would have just gotten that
you can put both bags on top, take the thin Box and snap it on so its halfway hanging over the edge, then put the 1/2 back on the other half that's the thin is not covering and the full-sized bag on top the full-sized Thin box
With the tote it's two wide meaning you can stack two things and it's not flimsy at all I was impressed
I wish my brand made a pack out system flex power tools
All three ridgid, Milwaukee and dewalt 2.0 modular tool box systems are made by the same company... it's all really fits in your budget.. I have both ridgid and Milwaukee and love both tool box systems.
I agree both work pretty well. Thw hardest part is getting just the right setup for both of them.
@@HANDYMANHEADQUARTERS very true.. there is no perfect setup without some kind of modification... just my opinion though.
The tote is great also
Where did he get that Milwaukee setup for 200 dollar's!??
When it first came out it was super reasonable. I think it was HD actually. Omce it caught on the price jumped way up!
I own three Ridged’s setups and are really good plus great on the bank account . My handle is a lot stronger then your one you were moving around . The crate is great for loses items . Yeah I learned like you the more you put on it gets heavy and does put pressure against your hand if your moving it around . But I’m glad I waited and didn’t buy the packout . With the packout draws coming out are the way to go . Both systems stink for loading and unloading .
Yeah the handle idk what is up. Second bottom box I've gotten after the first one broke.
@@HANDYMANHEADQUARTERS I have one Stack just full of paint equipment which is nice makes them light to move around and everything is not spread out in 🪣 buckets or 📦 boxes .
I love the Ridgid I never had any trouble with mine at all.Not 1 problem,don't know what this guy does with them ,he sure making everything look really hard,what is he doing
Whoaaa. Pump the brakes brother. It isn't as easy as the packout and my handle on the ridgid broke the first month I had it.
@@HANDYMANHEADQUARTERS I'm only playing around,I have the Milwaukee packout too,great stuff it is the best 1
Prices have increased 50% on both of these systems.
Insane!
The original packout is somewhat obsolete now that the drawer boxes are available.
The Rigid box system offers much higher value. If the Milwaukee was made of a different material like like fiber glass injected plastic or pure fiberglass composite then it would be a different story.
Thanks for your comment. Domt forget to subscribe to mt channel! Its much appreciated!
Unless you are working on flat floors I find that the boxes can be more trouble than they are worth let alone going on a higher floor of a unfinished building
The prices sure went up in 2024 !!! . You're looking at $400 plus for the Milwaukee setup!!
The Milwaukee is too bulky. The Rigid is better and easier to stack and unstack to move it. You can't carry a whole stack in anyways ! The big problem is that once you're working in an apartment or home, you want to have an instant work station once you restack the boxes. They both missed the mark because you need a flip out bottom like Stanley made years ago and drawers , and the top box just opens normally. The Stanley came apart in 3 sections, great design, but they were not durable, and the small wheels weren't any good either. Had the Stanley rolling setup been made slightly bigger and durable, that was best design !! .👍
I just seen that! The price went way up. My initial setup was 300 bucks for the whole stack and the bag.
Both are made by the same manufacturer. My Ridgid cases are superstars. I’ll admit the like the drawers in Big Red. I assume - I hope - Ridgid introduces drawer units soon.
They may! I seen a ridgid cooler that snaps on at my local HD.
Yes. I saw the cooler at my HD a couple days ago. I think they were $79
The way I see it there’s no need to put my Milwaukee in anything but pack out. You get what you pay for these days and if your making money on it you don’t want an inferior product. I’m sure the rigid will keep a rigid tool safe if you get my drift. Good review.
Yeah that is why I like to say go with what you can afford. Thanks for your support on the video
I was going to get the Rigid because of the price, but I knew I'd kick myself later for not getting Packout, especially now that it has drawers. Kaizen foam is great for the drawers, or if you want to set a small box up for drill/driver kit with bits. Keep up the good work!!
Thanks for you comment! Don't forget to subscribe.
The Packout system is definitely the most versatile. As far as durability? I've reviewed many test videos concerning this, and a good portion has the AEG/ Ridgid beating out the competition ( although close). As far as mods. - there are a few vids on RUclips showing modifications to the Ridgid system. Haven't seen any for Milwaukee. Then again Milwaukee has so many options, I don't think u need to modify. Personally I have the Ridgid system ( no, no Ridgid tools, mainly Metabo/ Hitachi). They do what I need, so I really can't justify spending over double. Rather have another tool.
Yeah i find milwaukee with the amount of options just cant be beat
I am a big fan of Milwaukee tools and it’s not long that I have had the Milwaukee packout 3 boxes like yours but the only difference is are all black here in the uk 🇬🇧 but I think these Milwaukee packouts are the best yes they are expensive just wish we could have red sets here in the uk 🇬🇧 stay safe 👏👏👍
Everonye im the US Wants black that is funny
That's what I was going to say when I was shopping for them I wanted the black ones
Wish I could have a
Black set in NYC...)
the wheel walls take up alot of space
Sold on packout because the bags or backpack for hand tools
I agree. Snap som snap off.
I own all Milwaukee cordless tools but for $99 you cant go wrong with the rigid. its durable beyond need, its easy to clasp on and off(is it the simplest? no) but its easy. Cant go wrong. Who know maybe theyll come out with a drawer system like the packout. As a carpenter my not be applicable for my needs.
All true statements! Please sunscribe to the channel
My boss is a Milwaukee finatic and had about 10 different packout sets and only had Milwaukee tools. I don't like Milwaukee myself, but as far as the park out, it is untouchable, bar none. As far as some of the tools, we won't get into that.
It is hard to beat!
The ridgid is good for bigger bulkier items, the Packout is just better at organizing, So many more options. I guess Ridgid just relies on price point for sales. DeWalt is in the middle as far as price and options.
Yeah i can agree with that. Slways evolving my tool storage.
I really love my Milwaukee pack out system yea it cost more but it's All tax right off
I actually like the Ridgid better than the Milwaukee.
I filled it with flex power tools from Lowes lol
Which is more durable, I don't know. All I can say the Ridgid boxes I have held out great. I will point out, all I have used is large and small toolbox (Pro Organizer). The Packout is maybe be more versatile compared to other available systems, but it's not versatile enough to fit my needs; therefore Milwaukee won't be getting richer with my money.
Thanks for sharing!
I have the Ridgid system and it works for me. Generally speaking the more expensive systems will be better. But some of us have a hard time justifying the expense. My grandfather was a master carpenter and would roll ove in his grave if he knew what I paid for the Ridgid system.
Had the Same rigid boxes 3 years.. Not one problem.. In out of trucks every day.. Concrete contractor...
I may of just got a bad one.
Had mine for 2 years in and out every day no problems with my rigids
I hide my Milwaukee Tools inside of rigid boxes
Haha!
I'm sorry I think a lot of guys just like spending money. The red system is good but not 2.5× as good. Yellow is behind red with upsales and junk. Gray is just a no. So its down to orange 2.0. I think if they had a drawer in there system it would be best band for the buck.
Yes lots of people spend money just to make videos with it. I sold all my packout!
But I think the Milwaukee worth putting the extra dallers. Great video bro
My only problem with the Rigid is the latches.
Thry are too sloppy and Rigid could easily fix this design flaw.
Yeah i agree not the best design
I got the DeWalt tough system 1.0 on sale got the bottom rolling box $59. The xl box $39 the small box $35 got a Milwaukee ultimate job site backpack alsp got a awp tool bag a cheap canvas rolling bag and Bosch small canvas tool bag it works for my needs but I wish I could have the back out my budget did not justify it and the wife can't forget the wife if she not happy well no new toys for me lol 🤣
Good scores on the price though!
The rigid handle bent on me the first day with a light load. It is no longer capable of collapsing. It's junk n my opinion. The plastic boxes are good quality so it's too bad they cheaped out on the handle.
Yep handle broke on me too!
@@HANDYMANHEADQUARTERS I thought it might be better than it looked because of the Ridgid name and surely Ridgid wouldn't put their name on something below Kmart quality but I was wrong. I will have to make some kind of a handle for it.
With the ridiculous price that the aeg quickstacks have been going up they have just shot themselves in the foot because they have made it so much easier for people to go with milwaukee packout or even dewalt tough system 2.0 now. I wont sick with aeg/ridgid now the price hike is insulting.
When everybody afford an iPhone but not on a workhorse. It doesn't make sense.
I hear ya.
The packouts are definitely solid!
Agreed!
Milwaukee button never works right,And they r so over priced but they know the fan boys will buy them.I would take the Ridgid if they were the sane price.True story
Did you try the warranty process? Glad to hear ridgid works better for you.
I'm Paul mcwilliams from mcwilliams brother construction
Thanks for tuning in!
Yes ,it’s solid and freedom modular storage. But pricey 😂. In Malaysia ,these part of only for 8424 is (Ringgit Malaysia )RM 398 . 😱 😂
It is a little pricey!
It's 250sh
is it really that hard to put drawers on the fucking thing? the world really needs an affordable option to the pelican toolbox ,come on Milwaukie make it happen
They do have drawers no for the packout!
This was a great comparison and it helped me immensely.
With the incoming Pro Gear Gen 2 some of your issues with the Gen 1 were dealt with.
For the price I expected the Pack Out to be far stouter. The Gen 1 feels beefier and the Gen 2 looks about the same. I've seen colleagues with cracked Pack Outs. I prefer the larger system of the Pack Out but I think I'll check out the Gen 2 for my needs.
Thanks again for your time in making this thoughtful comparison!
Cheers!
Thanking you for watching
Okay so you complain about two latches and struggled to tip it over.. also you can’t even figure out to turn your hand around to not pinch your hand.. like really
Thanks for your comments. Have. Great day!
I agree the hamdle on the rigid is odd. I end up using it palm up when hauling it. I really like the milk crates just because they clip together. I have 6 in my work truck
Yeah see I do the same thing! Thanks for your comment. Please subscribe to my channel! I would really appreciate it.
THAT IS TO TAKE 2 OR 3 BOXES, NOT TO TAKE A WORKSHOP. LOL
Maybe you can buy a bigger screw box.....
Thanks for your comment. Be sure to subscribe!
you get what you paid for
Man you complain ALOT, a lot of whining. Not really a Comparison Review. Just change the misleading Title to Why I prefer the Milwaukee. Maybe think review through more next time.
Thanks for your comment and thank for tuning in!
There is no comparison, Milwaukee owns the game and all the other players submitted their surrender flag.
Haha!
Totally agree these folks must own rigid tools🤣🤣don’t blame them for choosing a cheaper box I would too if my drills were a 1/4 of the quality.
Ridgid are rebranded AEG had ridgid and AEG tools as batteries are compatible never had one that didn't do the job or break daft Milwaukee just paying for a name. Not a sheep don't follow the heard
@@ashbashbaby2 sounds like a rigid owners justification😬😬
@@ashbashbaby2 I didnt have the same luck. One broke on me so I tried milwaukee.