iPhone 11 Pro/Max Battey Replacement 👍No Message and 100%
HTML-код
- Опубликовано: 5 сен 2024
- Want me to do this repair for you? Make sure to check out our mail in repair services. Maybe your device will be in a video!
Mail in Repair Service
www.fixdirepai...
How to replace the iPhone 11 Pro/Max batteries without getting the message that iPhone give when battery is replaced and also fix battery health percentage and cycles.
My Repair Must Haves
Vacuum Heat Plate amzn.to/430qlmI
Cutting wire amzn.to/49SswLi
UV light amzn.to/49SZevX
LOCA + Glue gun amzn.to/430qvdO
Microscope amzn.to/3Tj5fMZ
Extra light for Microscope amzn.to/49SszGY
Tweezers amzn.to/42ZsnU4
Clean Room Wipes amzn.to/42YJwNQ
Cleaner Dispenser amzn.to/3uK8cNv
Acetone amzn.to/49AfbHQ
99% Isopropyl Alcohol amzn.to/49B79P1
All parts and tools can be found at
www.mobilesent...
Thanks for the video. Glad to know it's not a good idea for me to change the battery on my phone O_O
So how did you go about it
@@Bigbaz-bj8io Oh i didn't! your video showed me it would be more work than i wanted haha
@@rivertonrentalswy can you give me your daughter then
You make it look easy but it just convinced me it's not something I would try. Looking at the yelp reviews in my area for battery replacement on iPhone 11 Pro shows me there's a 50/50 chance of having your phone destroyed at one of these service providers. God, I hate Apple.
Very comprehensive insights. Thank you so much, doesn't get any better than this. Keep it up 👍
Thanks for the awesome comment
Damn its so complicated thats why i dont blame this phone tech they charge a lot for battery replacement. Well thank u for the video.
Thank you for this complete video and these great explanations. Sad that apple lock like that the replacement of just a battery.
Tell me please, what that purpose is needed adapter for connection of the battery for programmer? As I see you desoldered old controller for new battery, is it not enaugh? And with old original controller just program the battery.
ios 17.4 now have to do a flash update and select repair battery health on 3utools after doing the tag on method.. make sure to at least take not of screen lock code to be able to do this. in some cases you make need apple id and password unfortunately..
noticed some people didn't understand what was going on. The board removed is what contains the genuine apple information. problem is, it also contains the ORIGINAL batteries cycle count and capacity % in this case battery had 87% capacity and 1000 cycles. if you just connect the board to the battery, it will still show as 87% and your customers will think you didn't change the battery.
@Floida Apple Mac Pros inc. I appreciate the explanation! Only thing I’d add is that the person using the phone should notice it’s battery life go back to new even though the settings won’t if you don’t alter the data.
@@FIXDPHONES thank you ... right now they are sold out of the copy pro and welder, so im waiting for them ..are they typically out of stock on these? or is the wait time short? otherwise ill buy somewhere else.. thank you for your time. your video on faceID fix is EXCELLENT
Se queda para siempre el Flex en la batería ?
I can but doesn’t have too
Thanks for sharing this I really appreciate it.
I have small repair outfit and it went mostly smoothly for an iPhone 11.
I may not have trimmed leads enough on core battery as battery cover piece wouldn’t completely cover.
It worked for 3 days and now battery message returned.
Any thoughts?
I was able to change battery health and cycles without issue.
I did use a regular battery prior.
The only difference of note is I used interstellar apollo one. It appeared to work? How come you didn’t continue to use? Could it require copy power?
The apollo one isn’t even reading original serial number on battery I ported data and flex cable to.
Am I screwed?
Thanks
Did you leave the tag on flex in the phone?
@@FIXDPHONES I did yes.
hi, i got the same problem regarding the face id when changing the battery, how did you fix it, i didn't find any other video on your channel. Thanks in advance.
How to restore Face ID using the iCopy Plus 2.2 and New Face ID Board(No Soldering Required)
ruclips.net/video/QiiVVhlE_Rc/видео.html
Really nice job! I noticed that you didn't have to activate the new cell at all? iCopy just detected it right away? For some reason I do have to plug it in to an external charger first, otherwise it won't read the data. Odd. Thanks for the video!
Great point. You can activate it with a power supply or external charger but I just plug it into the phone and charge it up a little and it does the trick. Then the copy power tool detects it.
@@FIXDPHONES
Ty for the answer!
Hello, what tweezers do you use? They seem, awfully durable and look very nice
Why use flex? Can’t electric swapped cannot be flashed?
Thank you so much for your helpful video (& channel). Could you tell me if I could also program the new battery with an Icopy Plus 2.1 or will I need a dedicated battery programmer?
You should be able to with no problem as long as the you also use the compatible tag on flex’s for the models that require one.
The whole thing works without swapping the bmi?
Yes, you can always use an aftermarket battery without swapping the bms. You’ll just have to deal with the notification and not battery health in the settings, both most people can live with.
i just repaired my screen on my 11 pro max and its giving me the non genuine part notification, is there a way around this to make it go away? thanks. gonna do the battery soon thanks to your video
It’s possible, but is quite difficult. Here’s a video showing the whole process.
ruclips.net/video/jT6eHy7lr1A/видео.html&feature=sharea
Hey so how did you get the software to update? I tried and it updates and them goes into the coder like cmd if you know what I mean.
Can you fix my iPhone 11 Pro like that
In your other video you say that you can take the tag on flex out for the next repair and that the percentage and battery health will work normally?
Yes, I said I hadn’t seen any issues with leaving them out, but apparently if you do it can revert back to the old percentage after a full battery cycle. I’m currently testing for results
@@FIXDPHONES Okay, please let me know the results of your tests once they’re done. That would be really appreciated 😁🙏
@@FIXDPHONES hi, have you test it ??
bethry mah 3046 orignal 3969 nah
I just tried to replace the iPhone XR battery by moving the old BMS battery to the new battery. but after a few days my cellphone suddenly often turns off or loses charge. What caused it? this is happening on other phones as well
Possibly the tac welds weren't good enough and separated.
Board issue, not battery.
Does it stay 100% permanently?
No, it will go down over time just like the original battery did over time
This is intentionally done so that consumers cannot fix their devices as doing so themselves would mean a significant drop in sales.
Now i know my next phone is a xiaomi
Hey
I have the apollo interstellar one from ms, do i need to use the tag on flex? Whenever I try to write the data onto it via the qianli software, it states "data write-in/Binding failed, please try again."
Yes you need the tag on flex
yes, you need the tag on flex for the 11 series and up. The new core battery may need to be charged a little as well, or I've found that it helps to charge it up a little before altering the data.
@@FIXDPHONES Can you help me? Im using the JCID V1SE and it didn‘t work with the tag on. „abnormal battery reading“. Everywhere stands 0%..
But without the tag-on its fine. The battery can read.. what can i do?
@@gerrit9106you need new tag on. that one maybe had broken.
i never leave the flex inside,no problems for now...
After a full cycle without the tag on flex the phone can reset the data. But I’m kinda with you on this as well….maybe it’s a iOS thing?
What if you format to factory settings? I think it Will show old data tho
@@FIXDPHONES maybe on an update only?
waayyyy too damn vhard
Can i do this with every Batterie?
Pretty much yes
Good job!!!!
hello i tried the same thing with jcid tag-on flex but the iphone stll show 85%
Did you first plug in another battery to get the message?
ليش ابل ماتبيع البطاريات وفيها هالميزه ونفتك من الغثى
So a easy repair then 😂😂😂😂 why don’t they make the battery replacement easy…….🤔😇
this bettry not original
So i need a 100$ equipment to change it... will take it to local shop, they charge 65$.
Only if you desire to not have the battery notification not present and still have battery health in the settings. You can always do it for less and deal with the notification with any cheap aftermarket battery
@@FIXDPHONES That message pops up only when you start the phone or is popping up all the time.. ?
@@roadrunner1095try for yourself
use i2c battery repair.... no need to give battery extention to customer
How? It still needs battery extension to show percentage
@@ilyaglotov9756 use flex i2c extension for first time after reset battery data with i2c tool...... after phone show 100% BH.....power off phone and remove i2c flex and switch on the phone with battery connected without i2c extension
@@ciloyofficial1515 can you send me actual video?
@@probinsiyanonggalavlog3515 pm me on facebook facebook.com/kabuto.reborn.srtmoe
@@ciloyofficial1515 hahahaa, your method still show same battery health actual percentage in 3utools (ex: 78% before increase), only on device show 100% CMIW..
I’ve no way of doing this to cable .. damn my phone will become useless then
My 11 promax was 😢at 90% and within 3 days it drained to 81 % 🥹😭……. Initially I made enquiries about battery 🔋 replacement and they said if they change it, The percentage won’t show 🆙 again 😤
sounds like they didn't do it right.