Plywood industry working REAL hard on making plywood a viable and consumer friendly option with its main two faces. And this guy comes in without a care and hides it. Genius, love the content.
Wow, I am a woodworker and have never liked plywood until just now. You are very talented and this is definitely high end material that you just created.
If you veneer the original plywood (before you started the process) with a very different looking wood. Maybe a brightly coloured stained veneer or brightly coloured plastic, or even if you started by glueing two pieces of plywood together with a coloured resin. Then you'd end up with a thin line of colour that would add a lot to the finished pattern. I actually really liked it before you veneered it. Those little squares added a nice little detail around the edges.
Glueing plastic to wood is unlikely to be reliable. Gluing three sheets of thin ply is unlikely to deliver a flat sheet. Not to mention the silly costs of Baltic birch plywood.
A person going way beyond their means to bring better quality and design is always great to see. For craftsmanship like this, you deserve to be paid top dollar because of the quality.
Wow! I don’t know how I stumbled upon this video but I enjoyed it so much! That veneer is stunning. It makes me want to sell everything I own and set up a woodworking shop in my garage. You are a true artist.
This is a really thorough and thoughtful how-to video, but honestly, for me, the biggest benefit is pure inspiration. I’ve worked with a lot of reclaimed plywood and saved those little offcuts because they’re just too cool to waste. Your ideas have inspired me to create inlays and edge banding with those old beauties. Fantastic content, looking forward to viewing more of your work!
i love the way it looks when you offset it by one or three and it looks like a very cool spiral pattern, would have loved to see you use it! looks much more refined and complex, would personally love it on a piece
@@simonstucki Evidently I missed it so I looked for it at 8:20 to see what the big deal was and didn't find it. Well I kept going a bit more and WHOA, there it is @9:20-9:21. Wow!!!; that is terrific! Attention to detail. Thanks
Bonus, I've been looking for different ways to apply veneer. This is the first time I've seen contact cement used. Usually it's a big elaborate glue and clamp process. I came for the plywood pattern and left with a new to me veneer process I am definitely going to try.
Bro if you have Wood Glue you don't need to use any toxic Glues. We make Bespoke Furniture in England mostly we use PVA,which is wood glue.Don't know Why everyone thinks they need some sort of epoxy to glue Venner..... After All veneer is just thin piece of wood
Clamp all the fragile strips together between two slightly lower scraps of wood, then gang sand the fuzzies off their edges in one quick sanding that does all of them at once. Fast and no breakage possible.
When gluing on the veneer, lay down several thin strips of wood across the substrate and put the veneer on top of the strips. Pull the strips out one at a time and allow the veneer to attach to the substrate a little at a time. That way you won't position the veneer in the wrong place. Once the two pieces touch, they are not coming apart. Use a j-roller instead of a piece of wood to finish the adhesion. This is pretty much the same as attaching plastic laminate like Formica. I once positioned a large piece of plastic laminate incorrectly and had to remove it. I wound up using Autozone's brake cleaner to spray between the layers. It dissolved the contact cement immediately and I was able to clean it up and re-glue it. It was simply amazing. I haven't tried it with wood veneer and I hope I will never have to.
Thanks for the info. I've had the same thing happen but it wasn't a big piece so I just made another one. But I always have brake cleaner for mechanic work and that would have been faster and no wasted material. I haven't made that mistake since but it's still good to know
@@wholegrain27 I had to finish a kitchen & bathroom remodel that someone else started and got fired halfway through. Nobody lived there and it sat through the winter with the heaters turned off and the countertops had bubbled up In several places. I didn't know how to fix it because I'd only used the prefabed countertop pieces. But I had used the pre-fab end caps that have dried glue on the back that you stick on using a clothing iron. So I used an iron with a damp hand towel under it. It took a while but it worked and I also had to put weights on it right after I rolled it because it would start popping up after a couple minutes. So heat does reactivate it but I've never tried to reposition a whole piece before.
A painstaking job(!!!), but really cool!!!👍 Anyway, my father - an old carpenter with 50 years experience - push veneer onto wood, with a smooth corners piece of plexiglass, to avoid breakage. It works really good.
4:35 If you cut that piece in half, couldn't you glue the 2 halves together at the notch ends? It looks like they would fit perfectly and you would have a square piece with no edge waste.
Hi Michael, Very inspiring thanks! FWIW you can "float" the contact cement veneer over the substrate by using some 1/4" x 1/4" wood strips; removing them one by one. It makes the assembly less stressful, especially when veneering a countertop sized piece of veneer.
I used to make my own plywood from all kinds of wood veneer. The veneer is thin so you get a lot of layers and if you use dark and light wood it gives a great effect.
I have tried the plywood blades that do not have carbide tips on them, but they dull fast and then burn. What works best for me is a 7-1/4" 24 tooth carbide blade that is about 1/16" wide and a zero clearance insert. It cuts great and usually does not leave any fuzz like you are seeing. The down side is you can't cut more than about 2 inches deep and a SawStop tablesaw will not work with anything smaller than 10" unless it's a Dado blade. Otherwise this is my go to tablesaw blade.
This gets you a subscription i will now use this for my computer desk thinking about using a table router to remove the inner layers of the edge of plywood and pushing these in as side inserts on top would looks like a solid flat surface on the side would leave me with a bordered diamond pattern could even angle the ends of the inserts to make them seem to transition better
I’ve thought about using patterned ply as edge banding when you’ve done like the tambour shop cabinet, your wife’s ply and metal workbench, etc etc. I absolutely love it, if you added patterns mixing hardwood with ply it’d be stunning just like with your cutting boards and your tool chests… you’re the Micheal Angelo of woodworking with the art you implement in your projects. I can’t wait for next week, it’ll take forever to get here. Thanks a bunch for showing the process of your experiments lol
@@MichaelAlm I’m sooooooooo excited! Thanks a bunch for all the hard work you put in not just the builds themselves but the filming and the attention to detail in explaining how or why, your solutions for problems… phenomenal and greatly appreciated 🤘🏽
Wow the pattern is incredible, i imagine that would look great to have the pattern continue all the way around the piece. Top, bottom and all the sides
That is sooooo pretty. I used to use plywood for wood carving of sculpture many years ago, before my hands go very arthritic. I loved the topographical look of the human form carved with all those layers.
I love these Rockler clamps. I'd recommend covering them with cling film, because once you get them gummed with glue they are very difficult to clean. The paint comes off very easily. Use cling film between the wood and the clamps is the answer
This is amazing, truly creative not to mention visually appealing! You’ve truly made it addicting to watch your videos using bb ply especially. Thank you for open sourcing these innovative concepts with the rest of the woodworking community 🤙👊.
Gracias Michael por sus videos, me encanta el contenido de su canal. Además, agradezco para los q no sabemos suficientemente inglés, su habla pausada. Gracias de nuevo, saludos desde España.
Very informative Michael, and the diamond pattern is really great looking. The chevron pattern looked great too, but the diamond really popped. Thanks.
At age 77 & working out of a 1 car garage since 1976 in Cambridge, ON. Ca. I can now eliminate a lot of other Subscribed channels, I Love how U clearly video every detail like my woodworking Teachers from Eliminentry School. ( which seems to Be a sign of the PAST. ) And that U kill the Music when U R about to talk to US. GO TO ELEMENTARY EDUCATION FOR A PART-TIME JOB, but don't give up your hobby time! For $120.00 annually I need to join the local Seniors Centres that have Woodworking Shops Bigger than mine with up-to-date EQUIPMENT, to keep me going for another 30-plus years, HA HA. GREAT PERFORMANCE YOUNG MAN.
By the way, anyone who does not have all of these tools, dont be discouraged! It is entirely possible (and I, a total noob have done) this all by hand :D
Even if someone doesn't have the shop, but owns a jigsaw that can be angled, then it's still possible to do with relative ease (and without spending oceans of time on it). Did you do yours entirely by hand? If so, that must have taken an insane amount of time
I''m really interested in the mathematics of tilings and symmetry, I really enjoyed watching the chevron and diamond patterns come together so well. great stuff!
I thought I was the only one that used a Japanese pruning saw as a flush cut saw! I discovered that a few years ago and it has become my favorite tool. If anybody else wants to pick one up you can pick a flush cut with a composite handle up at most harbor freights for $12. When I started buying them they were $6 but they've gone up a little! Well worth the purchase.
This is so cool and beautiful I immediately want to do it even though the only tools you used that I own are circular saw, sander, chisel, tape and clamps. Not gonna cut it.... Literally.
shivering black bell thumbs up! 3/6/23 watched this, most recent was the lathe case and build that I am aware of. I enjoy your material , skills you show.
Somebody has probably already mentioned this, but if not I'll give it a go. That plywood you made (the patterned plywood) wood (see what I did there?) look amazing as a tabletop in its own right. Just clamp all of the strips together and plane/sand them level and clean and arrange the patterns you want on a tabletop. Then flow some Envirotex/Epoxy over it to seal it up, protect it, and give it depth. I think that would look amazing! You could also ebonize it when using wood with higher tannin content, or do some selective staining on different pieces to create further pattern differentiation. Love what you created by the way! It's definitely amazing looking!
Rather than messing with paint rolls in order to apply contact cement, try applying it using a spray. You only need to cover the background with some scrap hardboard or paper. For smaller surfaces you need the double amount of glue as your roll absorbs a lot of contact cement.
I wonder if you did a dado on the edge leaving about a 1/16 on each side and then inlaid the pattern pieces. That way you would have a solid top and bottom without having to use veneer
There's no doubt that while this is labour intensive, it is definitely a way to add some serious wow factor to an otherwise dull element. What I would do when using them for edge banding, is leave them slightly oversized (and thicker) , and then run them through an edge banding router bit set from example Infinity Tools (item 61-505), then trim them back after gluing them onto your edge. This would most likely eliminate the breakage issue and make it easier to hamdle all the way around. The only disadvantage would be that it would cost more material in terms of trim loss. I really do love the level of creativity this both demands and offers at the same time. Excellent, inspiring work!
I think this got recommended to me bc I watch the Japanese woodworking vids. I love their patterns and how they plane it and make their own beautiful veneer
Love it ! I would be curious to try 45° cuts, see if it is is solid enough, it would allow a uniform pattern all the way around (except for the last corner, unless you're a maniac enough to try to make a perfect fit with the size of the pattern :p )
Very slick video. Excellent concept. Nicely done! You are right about the squeeze out. The reason you did not get more is due to the fact that water based glues are sucked up into the pores of the wood. Hence their excellent holding ability. However, since you applied the glue to only one side, the other side was bone dry and that is where your glue went, but not as deeply. In the future, you would probably get better results by applying the glue thinly to both surfaces. Which means handling the pieces after they have glue applied to one side. It will be a bit messier, but you will get a superior bond. I really like your video because it brought back memories of when I would make herring bone pattern wooden bowl bottoms. Keep up the fine work and stay safe.
Great idea, Michael. Try running a groove in a piece of wood the thickness of your strips and using it to hold them when you sand the edge. That will reinforce them and keep the edge straight. Also, that piece of wood you used for burnishing the veneer is the same as the old hammer veneer technique. Take care. Bill
I have played with plywood a fair amount. Good trick for finishing is several rounds of shellac and sand back, shellac and sand back, you can get a very smooth finish on all that end gran fiber.
Thank you so much for sharing your ideas and know how! I'm studying to be a woodwork teacher, and am excited to share this with my students in the future :D
I’ve edgebaned& veneered, essentially for 30 years as a self employed commercial millworker. Try contact cement on your edges also, it works. And the roll on stuff is ok, but look for a spray can of it for small jobs . A Hardware company called Richelieu sells it . Spray can sizes, up to bbq tank sizes.& for whatever reason, it is way less noxious . Cool concept on the banding also.
Inspirational idea and very fine work, thank you. If you want to reduce "fuzzy edges" that saw tears out try putting the tape on the plank you cut, rather then the table. It is more taping, but a better outcome, not that it matters much in this situation.
They have been doing exactly what you just asked in the furniture industry for decades. Half the time they don't even cut a Groove in the edge of the plywood
@@spaghettimonter13 im a finish carpenter and can also make furniture. I would've done with the groove, then use flush router bit to trim the edge. But this furniture came out 👌
Seen oriental carpenters who do this kind of thing and instead of using a bandsaw to cut 1/8th inch strips, they use a hand plane to shave a paper-thin veneer for edging. Zero curf too so you get TONS more use from a single piece of stock.
That's amazing, great idea. I really like how it turned out. Bonus points for the music track too, felt like i was kid back in the 80's. Now I'm going to see if anyone streams the movie Rad.
Another way to make the edge banding invisible: cut a wedge of that patterned edge banding and cut a angled channel around the whole piece. That will hide the seam of the edge banding in the top veneer of the plywood. (See the way 3x3 Tamar does her hidden hard wood edge banding)
This!!!! They even make a set of router bits that are both "diamond" shaped and "hour glass" shaped to match this up as edge banding with no visible top/bottoms. Using that and mitered ends would make for a really nice final look.
@@RetiredRhetoricalWarhorse I believe a sacrificial board below will work better because it moves with the workpiece, providing more stable support for the edge fibers.
One last thought, on the bandsaw, try placing a thin plywood sheet on the top of the table and run the blade 1/2 with a lip on the bottom of the plywood it should stay in place now use that as your zero clearance table top. This could also work on a table saw in a pinch. Bug youll need to 2 side tape it down so it cant move.
That's neat. You're basically making damascus steel but with wood. Just an fyi steel behaves similar to wood with all the grains. Instead of heating and beating you're using glue to stick it together, it's a very good visual of how damascus steel is made.
Plywood industry working REAL hard on making plywood a viable and consumer friendly option with its main two faces. And this guy comes in without a care and hides it. Genius, love the content.
This is one of the most inspirational carpentry vids I've ever seen. Keep on truckin'
Wow, I am a woodworker and have never liked plywood until just now. You are very talented and this is definitely high end material that you just created.
If you veneer the original plywood (before you started the process) with a very different looking wood. Maybe a brightly coloured stained veneer or brightly coloured plastic, or even if you started by glueing two pieces of plywood together with a coloured resin. Then you'd end up with a thin line of colour that would add a lot to the finished pattern.
I actually really liked it before you veneered it. Those little squares added a nice little detail around the edges.
Agreed
I think I'd just used a chamfered edges on those.
Plastic………………😳
Glueing plastic to wood is unlikely to be reliable. Gluing three sheets of thin ply is unlikely to deliver a flat sheet. Not to mention the silly costs of Baltic birch plywood.
Agree, the veneer actually make it like plywood again with different pattern and hiding those trace of artistic hardwork
8:44 you can see a spiral pattern form as the diamond ones misaligned.
looks so much better to me bro.reminds me an ancient greek pattern
Well spotted.
Daaaaaaaamn! Y'all are quilting in the comments section, I love it.
Yep, thats a greek key design. Very popular on wedding bands too
A person going way beyond their means to bring better quality and design is always great to see. For craftsmanship like this, you deserve to be paid top dollar because of the quality.
Wow! I don’t know how I stumbled upon this video but I enjoyed it so much! That veneer is stunning. It makes me want to sell everything I own and set up a woodworking shop in my garage. You are a true artist.
Hahaha! Glad you enjoyed it!
Woodworking is one the most beautiful and satisfying jobs to do. Thank You to all The wonderful Skillful wood workers for making beautiful work.
This is a really thorough and thoughtful how-to video, but honestly, for me, the biggest benefit is pure inspiration. I’ve worked with a lot of reclaimed plywood and saved those little offcuts because they’re just too cool to waste. Your ideas have inspired me to create inlays and edge banding with those old beauties. Fantastic content, looking forward to viewing more of your work!
I'm like you I can't bare to toss left overs because they can somehow be used for something cool
Wow! Who knew plywood could be soooo nice? Two secrets: great power tools and a gazillion wonderful clamps. Oh yes, very clever talented wood worker!
This man literally just made damascus wood
Totally
I laughed so much
Herringbone plywood
Wood workers are awesome people they have more patience than I could ever have
i love the way it looks when you offset it by one or three and it looks like a very cool spiral pattern, would have loved to see you use it! looks much more refined and complex, would personally love it on a piece
I was about to say exactly the same thing
noticed that too at around 8:20
@@simonstucki Evidently I missed it so I looked for it at 8:20 to see what the big deal was and didn't find it. Well I kept going a bit more and WHOA, there it is @9:20-9:21.
Wow!!!; that is terrific! Attention to detail. Thanks
You are right! I totally missed that. It would look absolutely amazing. Good eye.
Pause video at 9:42 for a great view of the spiral pattern.
I really admire your ability to think outside the box with your woodworking! This is outstanding! Thank you for sharing!
Bonus, I've been looking for different ways to apply veneer. This is the first time I've seen contact cement used. Usually it's a big elaborate glue and clamp process. I came for the plywood pattern and left with a new to me veneer process I am definitely going to try.
2p10 super glue / activator is an excellent option as well
We use a 40mm silicone rubber roller to roll afterwards much better than the ply idea though that is a good start point.
Using contact cement with veneer is a bad idea. Not permanent, it'll bubble eventually. Get a vacuum press and use Titebond
Bro if you have Wood Glue you don't need to use any toxic Glues. We make Bespoke Furniture in England mostly we use PVA,which is wood glue.Don't know Why everyone thinks they need some sort of epoxy to glue Venner.....
After All veneer is just thin piece of wood
It is what they use for laminate to adhere to the particle board.
Clamp all the fragile strips together between two slightly lower scraps of wood, then gang sand the fuzzies off their edges in one quick sanding that does all of them at once. Fast and no breakage possible.
When gluing on the veneer, lay down several thin strips of wood across the substrate and put the veneer on top of the strips. Pull the strips out one at a time and allow the veneer to attach to the substrate a little at a time. That way you won't position the veneer in the wrong place. Once the two pieces touch, they are not coming apart. Use a j-roller instead of a piece of wood to finish the adhesion. This is pretty much the same as attaching plastic laminate like Formica. I once positioned a large piece of plastic laminate incorrectly and had to remove it. I wound up using Autozone's brake cleaner to spray between the layers. It dissolved the contact cement immediately and I was able to clean it up and re-glue it. It was simply amazing. I haven't tried it with wood veneer and I hope I will never have to.
Thanks for the info. I've had the same thing happen but it wasn't a big piece so I just made another one. But I always have brake cleaner for mechanic work and that would have been faster and no wasted material. I haven't made that mistake since but it's still good to know
@@chichidouglas5078 doesn't applying some heat release the contact enabling repositioning
@@wholegrain27 I had to finish a kitchen & bathroom remodel that someone else started and got fired halfway through. Nobody lived there and it sat through the winter with the heaters turned off and the countertops had bubbled up In several places. I didn't know how to fix it because I'd only used the prefabed countertop pieces. But I had used the pre-fab end caps that have dried glue on the back that you stick on using a clothing iron. So I used an iron with a damp hand towel under it. It took a while but it worked and I also had to put weights on it right after I rolled it because it would start popping up after a couple minutes. So heat does reactivate it but I've never tried to reposition a whole piece before.
A painstaking job(!!!), but really cool!!!👍 Anyway, my father - an old carpenter with 50 years experience - push veneer onto wood, with a smooth corners piece of plexiglass, to avoid breakage. It works really good.
Your patterned plywood builds and ideas are simply amazing... keep them coming...
You have no idea how many ideas this video gave me 🙏
4:35 If you cut that piece in half, couldn't you glue the 2 halves together at the notch ends? It looks like they would fit perfectly and you would have a square piece with no edge waste.
Great idea
that was actually a good idea
no, sorry...
Maybe if every piece was the same length, but it looked like they had some variance.
Hi Michael, Very inspiring thanks! FWIW you can "float" the contact cement veneer over the substrate by using some 1/4" x 1/4" wood strips; removing them one by one. It makes the assembly less stressful, especially when veneering a countertop sized piece of veneer.
I just love watching your creativity unfold in pushing these ideas further and further. Really excited to see next week’s project!
I appreciate how you model good safety practices!👍
I liked the look of the exposed edge of the plywood-edge-edge-banding.
that finished product is INCREDIBLE!
I used to make my own plywood from all kinds of wood veneer. The veneer is thin so you get a lot of layers and if you use dark and light wood it gives a great effect.
This is the coolest thing I’ve seen in woodworking!!!
I have tried the plywood blades that do not have carbide tips on them, but they dull fast and then burn. What works best for me is a 7-1/4" 24 tooth carbide blade that is about 1/16" wide and a zero clearance insert. It cuts great and usually does not leave any fuzz like you are seeing. The down side is you can't cut more than about 2 inches deep and a SawStop tablesaw will not work with anything smaller than 10" unless it's a Dado blade. Otherwise this is my go to tablesaw blade.
All that and you dont even mention what brand?
This gets you a subscription i will now use this for my computer desk thinking about using a table router to remove the inner layers of the edge of plywood and pushing these in as side inserts on top would looks like a solid flat surface on the side would leave me with a bordered diamond pattern could even angle the ends of the inserts to make them seem to transition better
I’ve thought about using patterned ply as edge banding when you’ve done like the tambour shop cabinet, your wife’s ply and metal workbench, etc etc. I absolutely love it, if you added patterns mixing hardwood with ply it’d be stunning just like with your cutting boards and your tool chests… you’re the Micheal Angelo of woodworking with the art you implement in your projects. I can’t wait for next week, it’ll take forever to get here. Thanks a bunch for showing the process of your experiments lol
Thanks so much! Mixing patterns with hardwood is a great idea! I'm looking forward to sharing the furniture piece. It's going to be a good one 😉
@@MichaelAlm I've worked with alot of plywood but honestly never thought about using it as a finished edge. Great idea. Thank you.
@@MichaelAlm I’m sooooooooo excited! Thanks a bunch for all the hard work you put in not just the builds themselves but the filming and the attention to detail in explaining how or why, your solutions for problems… phenomenal and greatly appreciated 🤘🏽
That right there is commitment and attention to detail!
Wow the pattern is incredible, i imagine that would look great to have the pattern continue all the way around the piece. Top, bottom and all the sides
I have only said this to the man who made a complete work station in a 4x8 space. You sir have solved one of life’s greatest challenges.
It just looks so good. The veneered piece is magnificent. Now I need to find an excuse to use this on something.
You got that right, it looks absolutely stunning :)
That is sooooo pretty. I used to use plywood for wood carving of sculpture many years ago, before my hands go very arthritic. I loved the topographical look of the human form carved with all those layers.
"Great temporary solution" Yeah, that should be Harbor Freight's motto.
We all go there first, and then upgrade later.
Hater. I've had a 20 dollar Chicago grinder last longer than a Makita before. Obviously it's an exception to the rule but don't be a hater
@@ToolforOfficeI don't hate them. I said they were great.
@@jamesconroy7030 I must need to learn to read again I suppose
Are they not? HF has gotten me out of so many problems.
I love these Rockler clamps. I'd recommend covering them with cling film, because once you get them gummed with glue they are very difficult to clean. The paint comes off very easily. Use cling film between the wood and the clamps is the answer
This is amazing, truly creative not to mention visually appealing! You’ve truly made it addicting to watch your videos using bb ply especially. Thank you for open sourcing these innovative concepts with the rest of the woodworking community 🤙👊.
Gracias Michael por sus videos, me encanta el contenido de su canal. Además, agradezco para los q no sabemos suficientemente inglés, su habla pausada. Gracias de nuevo, saludos desde España.
Привет из ЧЕЛЯБИНСКА.
Very informative Michael, and the diamond pattern is really great looking. The chevron pattern looked great too, but the diamond really popped. Thanks.
At age 77 & working out of a 1 car garage since 1976 in Cambridge, ON. Ca. I can now eliminate a lot of other Subscribed channels, I Love how U clearly video every detail like my woodworking Teachers from Eliminentry School. ( which seems to Be a sign of the PAST. ) And that U kill the Music when U R about to talk to US. GO TO ELEMENTARY EDUCATION FOR A PART-TIME JOB, but don't give up your hobby time! For $120.00 annually I need to join the local Seniors Centres that have Woodworking Shops Bigger than mine with up-to-date EQUIPMENT, to keep me going for another 30-plus years, HA HA. GREAT PERFORMANCE YOUNG MAN.
By the way, anyone who does not have all of these tools, dont be discouraged! It is entirely possible (and I, a total noob have done) this all by hand :D
Even if someone doesn't have the shop, but owns a jigsaw that can be angled, then it's still possible to do with relative ease (and without spending oceans of time on it). Did you do yours entirely by hand? If so, that must have taken an insane amount of time
@@Arterexius Yep. It took a while but it inspred me to keep going and upgrade my tools!
I''m really interested in the mathematics of tilings and symmetry, I really enjoyed watching the chevron and diamond patterns come together so well. great stuff!
I thought I was the only one that used a Japanese pruning saw as a flush cut saw! I discovered that a few years ago and it has become my favorite tool. If anybody else wants to pick one up you can pick a flush cut with a composite handle up at most harbor freights for $12. When I started buying them they were $6 but they've gone up a little! Well worth the purchase.
Amazon has done really neat ones
What a beautiful way to finish a plywood project.
This was really impressive someone get this guy a bagel!
Michael ,
I’m quite impressed with your ingenuity. You have my attention. I’m subscribing!
Geez, I'd be honored to have a cutting board or cheese board that looks like that. A+++
U8
Glad to see Bam has turned his life around
That ‘wood’ look great as plywood end grain laminate countertops
This is so cool and beautiful I immediately want to do it even though the only tools you used that I own are circular saw, sander, chisel, tape and clamps. Not gonna cut it.... Literally.
I like how if you offset the strips just a bit, you get a greek key pattern, too!
shivering black bell thumbs up! 3/6/23 watched this, most recent was the lathe case and build that I am aware of. I enjoy your material , skills you show.
As always, an awesome and inspirational presentation. You definitely make complex/sophisticated stuff look simple and practical.
You are like a mad scientist of carpentry, brother!
12:22 Clamp the strip between 2 boards to keep it straight and to allow you to apply a bit more force.
or use steel bars
Thanks
Somebody has probably already mentioned this, but if not I'll give it a go. That plywood you made (the patterned plywood) wood (see what I did there?) look amazing as a tabletop in its own right. Just clamp all of the strips together and plane/sand them level and clean and arrange the patterns you want on a tabletop. Then flow some Envirotex/Epoxy over it to seal it up, protect it, and give it depth. I think that would look amazing! You could also ebonize it when using wood with higher tannin content, or do some selective staining on different pieces to create further pattern differentiation. Love what you created by the way! It's definitely amazing looking!
That's a really cool project. Thanks for sharing. I sent the link to my wife. She comes from a woodworking family and will love this.
Rather than messing with paint rolls in order to apply contact cement, try applying it using a spray. You only need to cover the background with some scrap hardboard or paper. For smaller surfaces you need the double amount of glue as your roll absorbs a lot of contact cement.
Great work and loving the 80’s driving down the back roads plotting my revenge music. 🤦🏼♂️😂😂😂
I wonder if you did a dado on the edge leaving about a 1/16 on each side and then inlaid the pattern pieces. That way you would have a solid top and bottom without having to use veneer
Great idea. I'm stealing it! :)
Good idea, but unless you smoothen the edges of the strips, you might see the burry edges of the strips merely filled solid with glue.
@@Sniffowasabi smear very fine sanding dust into that or sand after gluing while the glue is wet.
There's no doubt that while this is labour intensive, it is definitely a way to add some serious wow factor to an otherwise dull element.
What I would do when using them for edge banding, is leave them slightly oversized (and thicker) , and then run them through an edge banding router bit set from example Infinity Tools (item 61-505), then trim them back after gluing them onto your edge. This would most likely eliminate the breakage issue and make it easier to hamdle all the way around. The only disadvantage would be that it would cost more material in terms of trim loss.
I really do love the level of creativity this both demands and offers at the same time. Excellent, inspiring work!
That was extremely cool, I can see so many opportunities to use this. Oh the possibilities!
I think this got recommended to me bc I watch the Japanese woodworking vids. I love their patterns and how they plane it and make their own beautiful veneer
Love it ! I would be curious to try 45° cuts, see if it is is solid enough, it would allow a uniform pattern all the way around (except for the last corner, unless you're a maniac enough to try to make a perfect fit with the size of the pattern :p )
Mind blown, thank you. And thank you for reminding me just how satisfying working with wood can be. I was actually jealous of you.
I feel like this would make a lovely surface for a painting with the decorative edge. Like a collab of painter and woodwork
I was thinking the exact same thing. Would make a lovely edge, for a painting.
Reminds me of 70s wallpaper.
Very slick video. Excellent concept. Nicely done! You are right about the squeeze out. The reason you did not get more is due to the fact that water based glues are sucked up into the pores of the wood. Hence their excellent holding ability. However, since you applied the glue to only one side, the other side was bone dry and that is where your glue went, but not as deeply. In the future, you would probably get better results by applying the glue thinly to both surfaces. Which means handling the pieces after they have glue applied to one side. It will be a bit messier, but you will get a superior bond. I really like your video because it brought back memories of when I would make herring bone pattern wooden bowl bottoms. Keep up the fine work and stay safe.
Great idea, Michael. Try running a groove in a piece of wood the thickness of your strips and using it to hold them when you sand the edge. That will reinforce them and keep the edge straight. Also, that piece of wood you used for burnishing the veneer is the same as the old hammer veneer technique. Take care.
Bill
I have to admit even that strip you cut on the wrong side actually looks amazing. Has a lot of potential with both sides having a nice feel to them.
Love anything with the patterned plywood on it. It’s so artistic and beautiful. Great job! 👍
amazing work! some people need fancy material to make good looking furniture and this guy using plywood can do better than them!
"No, pattern welded Damascus must be metal."
"Hold my drink."
I have played with plywood a fair amount. Good trick for finishing is several rounds of shellac and sand back, shellac and sand back, you can get a very smooth finish on all that end gran fiber.
Thank you so much for sharing your ideas and know how! I'm studying to be a woodwork teacher, and am excited to share this with my students in the future :D
I’ve edgebaned& veneered, essentially for 30 years as a self employed commercial millworker. Try contact cement on your edges also, it works. And the roll on stuff is ok, but look for a spray can of it for small jobs . A Hardware company called Richelieu sells it . Spray can sizes, up to bbq tank sizes.& for whatever reason, it is way less noxious . Cool concept on the banding also.
Great to know!! Thank you 🙌
This would be a really cool look for larger speaker cabinets
Inspirational idea and very fine work, thank you. If you want to reduce "fuzzy edges" that saw tears out try putting the tape on the plank you cut, rather then the table. It is more taping, but a better outcome, not that it matters much in this situation.
Can't you just mill a wide groove in the edges leaving the top and bottom layer of the plywood intact and embed the pattern between them?
Yeah that is what i was thinking. It mite be faster and also will save materials
And be much stronger
They have been doing exactly what you just asked in the furniture industry for decades. Half the time they don't even cut a Groove in the edge of the plywood
@@spaghettimonter13 im a finish carpenter and can also make furniture. I would've done with the groove, then use flush router bit to trim the edge.
But this furniture came out 👌
Fantastic idea. One of those that makes you wish you had thought of it. Absolute genius and impressive initiative
This looks so amazing! Wow, I’m bluffed! Kudos on having the idea and executing it so well.
What an awesome result. I even liked the look before veneering.
Seen oriental carpenters who do this kind of thing and instead of using a bandsaw to cut 1/8th inch strips, they use a hand plane to shave a paper-thin veneer for edging. Zero curf too so you get TONS more use from a single piece of stock.
Ive seen them hand planing paper thin strips. But I think doing that with end grain BB with 20% of the surface being glue joints would be impossible.
If you’re going to make even wider pieces, i noticed that when it was offset some more, it made loopy rectangular shapes.
Nice job!
That's amazing, great idea. I really like how it turned out. Bonus points for the music track too, felt like i was kid back in the 80's. Now I'm going to see if anyone streams the movie Rad.
Wonder if the ancient Greeks knew about lamination? That "Greek Key" pattern when the strips misalign is great!
They relied so much on original materials.
Awesome. Totally get covering the top with veneer, but I think the top edge pattern could also be a nice touch on some projects. Thanks for the video!
Another way to make the edge banding invisible: cut a wedge of that patterned edge banding and cut a angled channel around the whole piece. That will hide the seam of the edge banding in the top veneer of the plywood. (See the way 3x3 Tamar does her hidden hard wood edge banding)
This!!!! They even make a set of router bits that are both "diamond" shaped and "hour glass" shaped to match this up as edge banding with no visible top/bottoms. Using that and mitered ends would make for a really nice final look.
This is such an easy way to make plywood look classy!
Use a new blade when sawing the strips. Should help with the “fuzzies”. Then switch back to old blade when done for regular cuts.
Run a scrap board under the board you are cutting and you will get no fuzziness.
@@jeffcook8501 You mean like the plexiglass he used but didn't work?
Why do fuzzies sound like knockoff furrys?
@@RetiredRhetoricalWarhorse I believe a sacrificial board below will work better because it moves with the workpiece, providing more stable support for the edge fibers.
One last thought, on the bandsaw, try placing a thin plywood sheet on the top of the table and run the blade 1/2 with a lip on the bottom of the plywood it should stay in place now use that as your zero clearance table top. This could also work on a table saw in a pinch.
Bug youll need to 2 side tape it down so it cant move.
That's neat. You're basically making damascus steel but with wood. Just an fyi steel behaves similar to wood with all the grains. Instead of heating and beating you're using glue to stick it together, it's a very good visual of how damascus steel is made.
I'm not studying wood work at all. Saw the thumbnail and was so taken by the pattern. Thanks for such a wonderful video!
"I hear you're something of a woodworker?"
"I prefer 'glueclamper'"
In my head, I pronounced it like it was a German compound noun lol
9:20 To eliminate the fuzzy edge, put some painters tape on the wood itself, not on the saw table. You’ve created a fabulous new edging!
Yes! Definitely worth a try!
Thank you Michael, I expect Baltic birch boards to outprice gold ounce for ounce once the lumber gods lay eyes on your edge banding.
Wow, this is beautiful, I could think of a thousand different uses. Thanks for this.
I thought I had a lot of patience being a wood worker until I started watching your channel and I realized I’m almost as bad as a adhd squirel