Thanking you so very much for answering and explaining about the thread and the beads too. I have Miyuki and Toto beads but they are no.11 perhaps then I could use them.I don’t have size I0 but I shall try with them.They will be perhaps a little smaller but that is ok.Thank you so much for your lovely videos you explain so well.Thank you.Blessings Patricia
Good day! Dear Patricia, you can use any beaded thread, the main thing is not to use fishing line, as beaded pendants will not be able to lie beautifully evenly and cascade. The beaded thread should be smooth, soft and without knots, so that it is convenient to use it. Also, the thickness of the thread is important so that you can easily pass through the beads several times with a thread. But any beaded thread meets all our requirements. :)
Hello. Thanks a lot! I buy seed beads from my local craft store. Here they sell pictures for embroidery with beads and seed beads. unfortunately, I can't tell you where you can buy seed beads, because very poor quality beads often arrive when buying online. I hope you are lucky and you can find a good seller with quality beads, as the finished product is very dependent on the beads from which it is made.
Hi! Dear Nakita, I use a number 12 beading needle and nylon beaded threads, it was in this video that I used "Sparkle Beads" thread. You can use any beaded thread - these are thin threads, synthetic - they are smooth, thin and durable. In the manufacture of these earrings, the main thing is not to use fishing line, it will not allow the earrings to fall beautifully). I hope you get the intended earrings;)
hello. do you mean there is a thread visible between the top of the earring and the beaded pendants? this happens if the thread was not tightened enough when making beaded pendants. when we form the pendants, we tighten each pendant, adjust it with our hands, make sure that both threads stretch out inside (inside the pendant, one thread goes down, then goes up, if the thread is not corrected, then already in the finished earrings the pendants seem to be stretched and bald spots are visible - the thread without beads).
Is the thread and needles like sowing thread? And sowing nneedle? Also Im a beginner and the columns are curving. I don’t know if I’m using the wrong items( given that I’m so new, I just got a kit on Amazon- should I get something else? ) thank you
Hello. for beading, we need a beaded thread, this is a thin polyester thread with a diameter of up to 0.15 mm. I use 0.10mm thread, many people use 0.12mm thread. the thinner the thread, the less likely it is that the beads from the first row will burst when adding pendants. A beaded needle, you need a "beaded needle" so that it crawls into a bead. I use a beading needle number 12. Beads - Toho beads number 11 or Czech beads number 10. they both have beads about 2 mm in size. when buying beads, we make sure that it is even. Chinese beads are not suitable, with it the beaded product will be crooked.
@@BorntobeWild. Unfortunately, I can't advise. look at the specifications. Toho beads number 11 is on Amazon, I saw a beaded polyester thread with a diameter of 0.12 mm, but again without being tied to a specific store
Dear Patricia, I buy beads from my local store. I use Czech glass seed beads number 10, but other types of beads can also be used for weaving beaded earrings, the main thing is that the beads are even and of the same size. Whoever has the opportunity to purchase Miyuki beads or Toho seed beads will get an even more chic result))).
Good day! to fix the thread in the upper part of the earring (in the triangle), we pass several times through the beads at the top (through the top 4 beads, this is a loop for the hook). then we just go with the needle down, always put the needle in the nearest beads, fasten and just cut off this thread. For pendants, the second part of the thread is used, which we left in the tail at the very beginning.
please try to watch this video. the top of the earring is absolutely identical. exactly at the 6th minute you can see it better here. Please, I really hope that it will be clearer here. I really hope that everything will be easy for you. ruclips.net/video/PspuEy7EA50/видео.html ruclips.net/video/PspuEy7EA50/видео.html
Конечно можно, есть те, кому нравится делать, есть те, кому нравится носить. Такие серьги на Ярмарке мастеров продаются, на Этси, на Ебэй, даже на Алиекспресс, по моему, есть подобные.
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
You are the best 😀 ,am going to do that business , thanks slot for teaching may the Lord bless you
Thank you very much! And good luck to you! 🌞💐
Wow! Absolutely gorgeous! Thank you for sharing!!😊😊😊
Thank you very much!
Great tutorial, beautiful earrings thank you 😊
thank you very much!
Thanking you so very much for answering and explaining about the thread and the beads too. I have Miyuki and Toto beads but they are no.11 perhaps then I could use them.I don’t have size I0 but I shall try with them.They will be perhaps a little smaller but that is ok.Thank you so much for your lovely videos you explain so well.Thank you.Blessings Patricia
You are very welcome!;) Yes, try with your beads, I hope you get nice little earrings. Thank you! Wish you pleasant beading process!
Amazing ❤
Thank you very much!
Amazing❤
Thank you very much!
love it 😍😍😍😍
❤️💐
Hi can Nymo be used for the thread or any polyester thread for beading? Thank you for your reply Patricia
Good day! Dear Patricia, you can use any beaded thread, the main thing is not to use fishing line, as beaded pendants will not be able to lie beautifully evenly and cascade. The beaded thread should be smooth, soft and without knots, so that it is convenient to use it. Also, the thickness of the thread is important so that you can easily pass through the beads several times with a thread. But any beaded thread meets all our requirements. :)
Beautiful, I love the colors combination😊 cam you tell me where you buy your beads?
Hello. Thanks a lot! I buy seed beads from my local craft store. Here they sell pictures for embroidery with beads and seed beads. unfortunately, I can't tell you where you can buy seed beads, because very poor quality beads often arrive when buying online. I hope you are lucky and you can find a good seller with quality beads, as the finished product is very dependent on the beads from which it is made.
Pretty
Thank you!
What size needle do you use and what type or thread please and thank you!
Hi! Dear Nakita, I use a number 12 beading needle and nylon beaded threads, it was in this video that I used "Sparkle Beads" thread. You can use any beaded thread - these are thin threads, synthetic - they are smooth, thin and durable. In the manufacture of these earrings, the main thing is not to use fishing line, it will not allow the earrings to fall beautifully). I hope you get the intended earrings;)
Love them
Thank you!
Meraviglia
How do you keep the thread from tangling and knoting?
Hello. no way. I don't use additional tools. For earrings of this size I have no problems with the thread.
Wow
Can you please tell us what make beads you use
Hello. I use Czech seed beads number 10, 2 mm size. But, Toho beads number 11, the same 2 mm size, are much more better.
My thread was too short. Do i have to start over or can i tie some more and hide the knot under a bead?
Hello! In this video I show how I add thread
ruclips.net/video/zCqWUJUwpv4/видео.htmlsi=RyC_EAOLeIWRhKCw
@@BeautyBeadsLandyou are a lifesaver thank you so much ❤❤❤
Hi. What type of earrings do you use to make these earrings?
Good day! Dear Andreea, I usually use Czech seed beads number 10, but Miyuki Delica seed beads number 11 will also work great for such earrings.
@@BeautyBeadsLand thanks❤
❤❤❤❤
Can u pls reply... I used regular thread and i did it right and turned out great but I can see the thread from between. What should I do
hello. do you mean there is a thread visible between the top of the earring and the beaded pendants? this happens if the thread was not tightened enough when making beaded pendants. when we form the pendants, we tighten each pendant, adjust it with our hands, make sure that both threads stretch out inside (inside the pendant, one thread goes down, then goes up, if the thread is not corrected, then already in the finished earrings the pendants seem to be stretched and bald spots are visible - the thread without beads).
@@BeautyBeadsLand thank you sooo much for explaining 🥰🥰💗💗💗❤️❤️❤️
@@alexxizzz you are very welcome) good luck with your beading ♥️💐
thank you🥺
♥️💐
Is the thread and needles like sowing thread? And sowing nneedle? Also Im a beginner and the columns are curving. I don’t know if I’m using the wrong items( given that I’m so new, I just got a kit on Amazon- should I get something else? ) thank you
Hello. for beading, we need a beaded thread, this is a thin polyester thread with a diameter of up to 0.15 mm. I use 0.10mm thread, many people use 0.12mm thread. the thinner the thread, the less likely it is that the beads from the first row will burst when adding pendants. A beaded needle, you need a "beaded needle" so that it crawls into a bead. I use a beading needle number 12. Beads - Toho beads number 11 or Czech beads number 10. they both have beads about 2 mm in size. when buying beads, we make sure that it is even. Chinese beads are not suitable, with it the beaded product will be crooked.
@@BeautyBeadsLand thank you. Any online seller/brand suggestion?
@@BorntobeWild. Unfortunately, I can't advise. look at the specifications. Toho beads number 11 is on Amazon, I saw a beaded polyester thread with a diameter of 0.12 mm, but again without being tied to a specific store
Sorry forgot to ask where do you buy the beads that you are using? Thank you for your reply. Patricia
Dear Patricia, I buy beads from my local store. I use Czech glass seed beads number 10, but other types of beads can also be used for weaving beaded earrings, the main thing is that the beads are even and of the same size. Whoever has the opportunity to purchase Miyuki beads or Toho seed beads will get an even more chic result))).
Kind of hard to see what row u are going in to finish the triangke...followed u until then because i cant tell where to string the needle
Good day! to fix the thread in the upper part of the earring (in the triangle), we pass several times through the beads at the top (through the top 4 beads, this is a loop for the hook). then we just go with the needle down, always put the needle in the nearest beads, fasten and just cut off this thread. For pendants, the second part of the thread is used, which we left in the tail at the very beginning.
please try to watch this video. the top of the earring is absolutely identical. exactly at the 6th minute you can see it better here. Please, I really hope that it will be clearer here. I really hope that everything will be easy for you.
ruclips.net/video/PspuEy7EA50/видео.html
ruclips.net/video/PspuEy7EA50/видео.html
Could you please tell me where you get your beads from? Thank you!
Hello. i buy czech seed beads in my town at local craft shop.
Hi.. Where did you buy the beautiful beads. 🥰
Hello! I buy all my beads from my local craft store.
How long do you estimate the string was?
Hello. The length of the thread is about 2 m
What happened to the 9th fringe row?
in terms of the number of beads, the ninth fringe is the same as the first.
Можно купить
Конечно можно, есть те, кому нравится делать, есть те, кому нравится носить. Такие серьги на Ярмарке мастеров продаются, на Этси, на Ебэй, даже на Алиекспресс, по моему, есть подобные.
Can i buy it❓
Hello! You can make it 😉💐
There is no time for yar u can deliver for me
@@dearmanju9726 sorry, its the channel for teaching, not for selling