Hi, can you please advise, today I connected this cooling to the motherboard asus z270k and the backlight does not work neither on the pump nor on the coolers. There is no arbg connector on the motherboard itself
It won't make much of a difference. I have this exact same aio and originally mounted it identically to his set up. I finally got a new thermal paste and reseated it and decided to turn it so the "dc" was right-side up, and honestly, no difference. I'm sure the pump runs just fine how he has it and how I had it. If the tubes were at the top, probably a different story.
Why cpu fan and not pump fan ? I have similar motherboard and i dont know where i have to put
Both work the same. Pump usually goes pump fan and fans go cpu fan. If both are controlled by one wire than either one works
Hi, can you please advise, today I connected this cooling to the motherboard asus z270k and the backlight does not work neither on the pump nor on the coolers. There is no arbg connector on the motherboard itself
@@mbuniqueart if the motherboard doesn’t have a connector then there’s no way to control of
@@BigStuDolla91 maybe some third-party adapter will help?
@@mbuniqueart not sure. It’s a pretty dated motherboard and in not sure when rgb control started
@@BigStuDolla91 We will update as soon as possible then. Thanks for the answer 😉
How is it so far?
@@sanlo981 had a fan issue and switched to other brands. I’m using a Thermalright frozen notte now which is cheaper. The review is on my page
@@BigStuDolla91 what was the issue
*i already bought it and its coming today*
@@sanlo981 a fan was grinding across the sides of its housing. I think it was just a bad fan. Otherwise you should be fine
@@BigStuDolla91 thanks
I can't get the ligths to work
Did you connect to an open ARGB input on the motherboard?
Bro You have to rotate the pump
No? The pump is the correct way? Do you mean that he should put the pump towards the rare fan? 😮
I'm joking ❤
It won't make much of a difference. I have this exact same aio and originally mounted it identically to his set up. I finally got a new thermal paste and reseated it and decided to turn it so the "dc" was right-side up, and honestly, no difference. I'm sure the pump runs just fine how he has it and how I had it. If the tubes were at the top, probably a different story.