Ok here's what they're not telling you. 1: If you have an early model mini b, you probably need a rear diff cover to make this work. If you don't have two empty screw holes in the back between the axles, you need more parts. 2. The sway bar sets aren't the only parts you need. You need 4 part packs in total to install the sway bars on any mini b. Possibly a fifth, the rear diff cover. TLR314001 Front Sway Bars TLR314002 Rear Sway Bars TLR314003 Front Camber Block TLR314004 Rear Sway Bar Cover
THANK YOU, for clearing that up... i watched this twice, puzzled as to what I am missing here with my pro roller as well. Doesn't leave me with good feelings either. No explanation from Losi is not cool. Thanks again.
Do you mean a gear box case? No holes on rolling chassis version. Wondering if they can be drilled out to fit the rear sway bar bracket. Also, I have RPM front and rear A-arms. First glance, holes for sway bar stays are absent.
Honestly a great video/presentation. But as with the rear you guys mentioned you need the rear sway bar mount, correct me if I’m wrong but you need the V2 aluminum camber block up front which I think you forgot to mention. Also just my 2 cents, make em 280$ and include aluminum shocks that we can tune and change fluids. These plastic shocks are flat, wrinkly booty. Besides that I’m wildly obsessed with the mini B hahahaha
You need to get rid of the music and when you’re showing the pieces especially the tiny ones you need to zoom in some more so we can actually see the piece not your fingers
@@thebonerack8787 correct. only the brushless RTR comes with those mounting holes. There is a V2 rear diff case that has them, which will fit on any mini-B (and also mini-T I think).
I dont see any groove or holes to mount the front sway bar without also purchasing the front block but you clearly say the groove is on the stock front block? Why arent you replying to customer questions? Do better Horizon!
So what diameter Front Sway bar is to be used of the two that are included? He mentioned using the heavier for the Rear and put the 1.0mm to the side, but not for front sway bar.
Ok here's what they're not telling you.
1: If you have an early model mini b, you probably need a rear diff cover to make this work. If you don't have two empty screw holes in the back between the axles, you need more parts.
2. The sway bar sets aren't the only parts you need. You need 4 part packs in total to install the sway bars on any mini b. Possibly a fifth, the rear diff cover.
TLR314001 Front Sway Bars
TLR314002 Rear Sway Bars
TLR314003 Front Camber Block
TLR314004 Rear Sway Bar Cover
THANK YOU, for clearing that up... i watched this twice, puzzled as to what I am missing here with my pro roller as well. Doesn't leave me with good feelings either. No explanation from Losi is not cool. Thanks again.
Do you mean a gear box case? No holes on rolling chassis version. Wondering if they can be drilled out to fit the rear sway bar bracket. Also, I have RPM front and rear A-arms. First glance, holes for sway bar stays are absent.
@@thebonerack8787 if you look at the rear end of the car. Between the two axles, there should be two empty screw holes. On the rear of the diff.
@@floridabudgetbuilds4157 Thank you but there are no mounting holes on the back of the transmission case. My guess is that Losi changed the part.
@@thebonerack8787 Yeah, the RPM arms don't have mounting holes for the sway bars. Can confirm.
Honestly a great video/presentation. But as with the rear you guys mentioned you need the rear sway bar mount, correct me if I’m wrong but you need the V2 aluminum camber block up front which I think you forgot to mention.
Also just my 2 cents, make em 280$ and include aluminum shocks that we can tune and change fluids. These plastic shocks are flat, wrinkly booty.
Besides that I’m wildly obsessed with the mini B hahahaha
Will you offer a smaller pinion ? Is it a 3mm shaft but what pitch and tooth is it stock ?
I have the pro roller and there is no groove anywhere and nowhere to put the screws.?
Very nice vid. Thanks for sharing 👊
Which mini B is this model? Mine doesn’t have those 2 holes below the back tower where you installed the aluminum where the rear sway bar goes zzz
As mentioned in the comments, pro roller needs the losi front camber block. Kit fromt has no grove neither does hot racing.
What’s the front wing model number
Don't use the RPM arms as the front and rear do not have the mounting holes for this sway bar kit assembly. 🤙
The b set fits the t ?
You need to get rid of the music and when you’re showing the pieces especially the tiny ones you need to zoom in some more so we can actually see the piece not your fingers
Why does your rear have mounting holes for the rear sway bar? Mine doesn’t
Nor does mine. Must be on the new brushless RTR, not on the pro roller. Part # LOS212021 shows no mounting holes.
@@thebonerack8787 correct. only the brushless RTR comes with those mounting holes. There is a V2 rear diff case that has them, which will fit on any mini-B (and also mini-T I think).
I dont see any groove or holes to mount the front sway bar without also purchasing the front block but you clearly say the groove is on the stock front block? Why arent you replying to customer questions? Do better Horizon!
Thank you sir.
Will these work on the losi mini T or is it just for the B
the suspension arms and overall wheelwabse width is the same, so i dont see why not, i believe the only difference is a longer chassis plate on the T
So what diameter Front Sway bar is to be used of the two that are included? He mentioned using the heavier for the Rear and put the 1.0mm to the side, but not for front sway bar.
Plz Losi release a TLR tuned Tenacity TT Pro ……Plzzzzzz!!!!!