Nah bro I think it needs a different wrap. The sandy torpe colour would definitely scream beach vibes. But I think a new look is needed. Especially bc the 79 is the same colour. How about a baby blue interior though? Ocean vibes...
Leave the front bar mate, just give it a freshen up, it's the toughest looking thing on the car. And old mates suggestion of wrapping it like your Landcruiser, absolute gold, that is a must do.
Second that. A bit of polish and highlights will go a long way. That thing is way less offensive than anything tube based... Engine options either Suzuki G16 injected with a little turbski on the side (a well trodden path) or a modern twist maybe a Suzuki M18 or M20 with a similar helpful spooly friend for the noises and grins.
My mate had one as bush basher back in day, one time he couldn't get it started so he tried to roll start it down small slope beside cane field running alongside pushing he tripped trying jump back in and got his leg's ran over and sierra ended up in cane field 😂
A one day project for me is one of these, swapping a R1 motorcycle engine in and keeping both gear boxes. A fun rev happy engine in a light 4x4 bouncing down the beach…
My mum had a soft top Sierra when I was a kid , few doors down a neighbour had a turbo sierra with a efi conversion .... made 300 at the wheels .... was a rocket to watch go down the road
As a Sierra driver for the last 4 years since I got my license, I’m keen asf to see this, but I’m not keen to watch you make it 20x better than mine in 5% of the time 😂
You are about to discover that little zooks are NOT the most capable 4wd out there, but easily the MOST FUN. You can wheel them hard, but they make you learn to 4wd. Just trust me, don't bother trying to make it good on the highway. 👍
Hell Yeah Sam. We are building a 91 SJ70 Sierra with my 16 year old daughter as I write. We are looking forward 2 seeing what you do. Just so ya know that 15 inch, f100 rims are supposed 2 fit as that is what we have been told we have on ours. Also Suzi sport at Lawnton. Can get ya any parts except panels. That's what he told me as I live down the road.
The ultimate beach rock crawler that's what I see it doing tuff tracks I the million dollar track or the Balfour track these are the types of budget build I would keep in mind to minimise the damage to axles and running gear
I recently swapped my 08 falcon, to an 05 fiesta, to a 97 Suzuki Vitara. Absolutely love it. Not too bad on fuel for a daily driver, but it lets me get that little bit further out bush. I'd love to give it more of a restoration but just waiting for some things in my life to pan out first
Coils over the leafs would be cool to see and to keep cost low and give the benefits of coil. Essentially you pull all the leafs out to only what's required to keep the diffs there nicely or replace the leafs with super soft one's and then coils are placed over the leaf springs.
Considering they only run 3-5 leaves in a stock pack, if you remove any more you'll spend the whole time bending main leaves every time you let the clutch out. And yes, to contain the axle wrap you can build a truss on the diff and fabricate a track bar... But considering how little room there is in between the axle tube and chassis in the first place, there's barely going to be enough room for a coil that's substantial enough to contribute anyway. And then you have the lateral movement problem. Ultimately in a car this light, coil-over-leaf has no place. Strip it out and coil convert it, or make the most of the simplicity of the leaves
Awesome awesome awesome. Hey mate, I took out No1 spot last year in Sam’s BnB Show n Shine with my Jimny. I’m Sydney base so if you want some ideas let’s hook up. Bonnet scoop home built and twin locked now. Can’t wait for the next vlogs. I can also hook you up with Sydney’s no1 Zook mechanic. Get in touch.
Having just built one recently I went through all the options and read opinions from other zook owners to come up with our recipe. Ended up going with 1.6 baleno motor, 31's 2 inch lift, reduction gears, twin locked, exo cage = good fun and capable. Mrs and I also went touring and lived out of it for 4 months. Biggest thing is trying to keep the weight down low as they like to lift tyres and tip happy being swb. High HP swaps need to consider the driveline being able to hold up sure you could put in bigger gearbox and diffs etc but kind of getting away from what makes a zook fun.
Cool patterned material soft top would be super retro cool. Would look great with stock wheels again or something similar that’ll fit bigger tires. ARB’s bull bar for the sierra looks pretty retro in my opinion. Toyota 3k Carby swap and maybe newer Swift seat swap.
Vitara engine fits nicely in those. As for wheels. Same stud pattern as pre 95 F-100, F/150 Jeep wheel flares can easily be fitted to let you cut the guards to fit bigger tyres. You can also fit Dana 44 axles from a wrangler. Or find some GQ or hilux axles to beef it up a bit. Find or Build a steel bar with a single center hoop with KC Lights and a winch. The winch adds a little weight to keep the front on the ground slightly longer. I'd look at coil over conversion if budget can extend that far. But at least a SOA conversion and remove a leaf or 2.
built rotary, custom alloy bar w/intercooler integration out the front, but still "in" the bar, skinny but tall tyres, alloy rims, has to stay lightweight, no steel.
Wow maybe I should have bought a lotto ticket because I would have been a winner. I thought you might of bought an old school Zook . Maybe put a Roll cage and a nice lift and some upgrade wheels and tyres. Probably a 1600 turbo motor in it . And some nice sounds and some racing seats and sports wheel
I’m on the tail end of putting a vw 1.9td in my 96 vitara, which ppl also put in the little sierras - torque for days. Iv also seen videos of vitaras with LS swaps … might be a tight fit in the Sierra, but would be wild
All it needs for beach is a temp guage and viscous fan and it’s set 👌 Maybe some reductions and lockers Please leave the suspension stock!!! Lifts are shit in zooks!!
Engine wise going for a G16b from a beleno and adding a mild cam grind is basic, bolt in, reasonably cheap and slightly more power than the rest of the drive train can handle.
1.6 suzuki swift sport motor or the older 1.3 suzuki swift Gti motor go great in these things , i had an lj50 back in the day and was running an old datsun motor in it and the fucking thing screamed fully registered and all , great little 4x4s that are very capable and off road will show any patrol or Toyota landcruiser owner up 😂
V6 out of a commodore. Yes they sound like a cow getting dragged by a tractor but they are cheap, reliable and easy to mod. Plus AC, powersteering and an alternator that does all your charging properly
Im going to be honest thats the perfect base for a 1/10 scale TOYOTA LANDCRUISER, you gotta wrap it the same as your big cruiser! (become twinsies)
Nah bro I think it needs a different wrap. The sandy torpe colour would definitely scream beach vibes. But I think a new look is needed. Especially bc the 79 is the same colour.
How about a baby blue interior though? Ocean vibes...
@@dcameron0500 Oh yeah baby blue would look nice inside, Maybe change the line colours to some blue / mint colours to have a flowy vibe.
you could even try replicate a holden sandman vibe with the outside
Toyota 5K engine
It'd be the best 4wd with a Toyota badge then. 😉
Leave the front bar mate, just give it a freshen up, it's the toughest looking thing on the car. And old mates suggestion of wrapping it like your Landcruiser, absolute gold, that is a must do.
Second that. A bit of polish and highlights will go a long way. That thing is way less offensive than anything tube based...
Engine options either Suzuki G16 injected with a little turbski on the side (a well trodden path) or a modern twist maybe a Suzuki M18 or M20 with a similar helpful spooly friend for the noises and grins.
One hundred percent turbo rotary. Imagine hearing brap brap brap from a little sierra. Would be comical
4A-GE turbo would be awesome in that car!!!
C18
Now you're talking 🎉
Hell year
My mate had one as bush basher back in day, one time he couldn't get it started so he tried to roll start it down small slope beside cane field running alongside pushing he tripped trying jump back in and got his leg's ran over and sierra ended up in cane field 😂
Sorry mate, I haven’t seen u build anything. I’ve seen you pay discounted prices to get someone else and your mates to build stuff.
Oooft
🤭
Just say your broke😂
He’s proud to be brought not built 🤦♂️
A one day project for me is one of these, swapping a R1 motorcycle engine in and keeping both gear boxes.
A fun rev happy engine in a light 4x4 bouncing down the beach…
3.8 commo engine and th700 with coils and some decent wheels. Perfect....also a rollcage
Fuck I just randomly suggested the same thing then seen your comment! I’m with you mate the Buick 3.8’s would be sick. Pretty torquey
I love the bar on it haha
My mum had a soft top Sierra when I was a kid ,
few doors down a neighbour had a turbo sierra with a efi conversion .... made 300 at the wheels .... was a rocket to watch go down the road
As a Sierra driver for the last 4 years since I got my license, I’m keen asf to see this, but I’m not keen to watch you make it 20x better than mine in 5% of the time 😂
Hahaha 😂
Dw he’ll probably make it worse
k24 turbo swap lesgoooo
I’ve been doing 1.6L 16V Suzuki Sidekick engine installs on these for a while, they are a huge upgrade. Look forward to the build 🤘😎
Polish the front bullbar and keep it , suits the car
That or ho black to match the flares. I think the shape is perfect for Nostalgia
Once its done you should do a challenge with jock in his little beast clifford
You are about to discover that little zooks are NOT the most capable 4wd out there, but easily the MOST FUN. You can wheel them hard, but they make you learn to 4wd. Just trust me, don't bother trying to make it good on the highway. 👍
Hell Yeah Sam.
We are building a 91 SJ70 Sierra with my 16 year old daughter as I write. We are looking forward 2 seeing what you do. Just so ya know that 15 inch, f100 rims are supposed 2 fit as that is what we have been told we have on ours.
Also Suzi sport at Lawnton. Can get ya any parts except panels. That's what he told me as I live down the road.
The ultimate beach rock crawler that's what I see it doing tuff tracks I the million dollar track or the Balfour track these are the types of budget build I would keep in mind to minimise the damage to axles and running gear
I recently swapped my 08 falcon, to an 05 fiesta, to a 97 Suzuki Vitara. Absolutely love it. Not too bad on fuel for a daily driver, but it lets me get that little bit further out bush. I'd love to give it more of a restoration but just waiting for some things in my life to pan out first
Coils over the leafs would be cool to see and to keep cost low and give the benefits of coil. Essentially you pull all the leafs out to only what's required to keep the diffs there nicely or replace the leafs with super soft one's and then coils are placed over the leaf springs.
Considering they only run 3-5 leaves in a stock pack, if you remove any more you'll spend the whole time bending main leaves every time you let the clutch out. And yes, to contain the axle wrap you can build a truss on the diff and fabricate a track bar... But considering how little room there is in between the axle tube and chassis in the first place, there's barely going to be enough room for a coil that's substantial enough to contribute anyway. And then you have the lateral movement problem. Ultimately in a car this light, coil-over-leaf has no place. Strip it out and coil convert it, or make the most of the simplicity of the leaves
Awesome awesome awesome. Hey mate, I took out No1 spot last year in Sam’s BnB Show n Shine with my Jimny. I’m Sydney base so if you want some ideas let’s hook up. Bonnet scoop home built and twin locked now. Can’t wait for the next vlogs. I can also hook you up with Sydney’s no1 Zook mechanic. Get in touch.
Having just built one recently I went through all the options and read opinions from other zook owners to come up with our recipe.
Ended up going with 1.6 baleno motor, 31's 2 inch lift, reduction gears, twin locked, exo cage = good fun and capable. Mrs and I also went touring and lived out of it for 4 months.
Biggest thing is trying to keep the weight down low as they like to lift tyres and tip happy being swb. High HP swaps need to consider the driveline being able to hold up sure you could put in bigger gearbox and diffs etc but kind of getting away from what makes a zook fun.
a stock looking bumper that’s custom steel would look sick
Oooft 🤤
Cool patterned material soft top would be super retro cool. Would look great with stock wheels again or something similar that’ll fit bigger tires. ARB’s bull bar for the sierra looks pretty retro in my opinion. Toyota 3k Carby swap and maybe newer Swift seat swap.
6a12 Mivec 2.0 v6 200hp 200nm 8500rpm. Will fit better than the stocker (short and wide) will love the Suzuki’s stock gearing and will sound wild.
Vitara engine fits nicely in those.
As for wheels. Same stud pattern as pre 95 F-100, F/150
Jeep wheel flares can easily be fitted to let you cut the guards to fit bigger tyres. You can also fit Dana 44 axles from a wrangler. Or find some GQ or hilux axles to beef it up a bit.
Find or Build a steel bar with a single center hoop with KC Lights and a winch. The winch adds a little weight to keep the front on the ground slightly longer.
I'd look at coil over conversion if budget can extend that far. But at least a SOA conversion and remove a leaf or 2.
built rotary, custom alloy bar w/intercooler integration out the front, but still "in" the bar, skinny but tall tyres, alloy rims, has to stay lightweight, no steel.
Sr20 Nissan engine. Plenty of snub nose gearboxes that have transfer cases which can fit on the back to keep 4wd 💪🏼💪🏼
Volkswagen 2L turbo diesel or even the 1.6 out of the polo would be a sick conversion
About time, a decent car!
I've got a coil sierra and I looked everywhere for a bar like this, in the end bit the bullet and bought an arb one. Keep the bar!!!
Wow maybe I should have bought a lotto ticket because I would have been a winner. I thought you might of bought an old school Zook . Maybe put a Roll cage and a nice lift and some upgrade wheels and tyres. Probably a 1600 turbo motor in it . And some nice sounds and some racing seats and sports wheel
Can confirm you can have friends and own a Jimny or SJ
Those Hankook dyna pros you called garbage are the only tyres ive been able to get 80k kms from a tyre brand. Best bang for buck tyres.
This is gonna be sick! I like the bullbar
I knew ittttt! 😂😂! you must name it 🎉
Haha any name ideas? 😅😂
that’s clean now i know why ya been hitting the gym it’s a work out driving them weapons 🙌🥳
Put a hard top on put stock bars on it but put a nudge bar on for lights
Hmm rotary are a cool option but I think a G16E-GTS would be a better option for the size of build and keeping it an piston engine.
Awesome mate, I’m half way through my LJ70
I had an SJ413 in the 90s and loved it.
Let's see how you go with this one
A L67 supercharged 6 commy engine would be pretty sweet
Keep the bar, best part of it,
I’m on the tail end of putting a vw 1.9td in my 96 vitara, which ppl also put in the little sierras - torque for days. Iv also seen videos of vitaras with LS swaps … might be a tight fit in the Sierra, but would be wild
Refit: SUBARU...WRX 2.5L boxer engine!!
Have fitted one before a number of years ago in a Suzi hard top...went like a rocket! 😊
All it needs for beach is a temp guage and viscous fan and it’s set 👌
Maybe some reductions and lockers
Please leave the suspension stock!!!
Lifts are shit in zooks!!
2 inch lift with 29's fit and flex without issues.
Stick a GR yaris 3 cylinder in it.
With 79 series landcruiser diffs.
id love to see you put a rotary in this little beast, get it doing wheelies
More interior features than a 79, pretty well equipped!
I have a lwb stockman as my engine crane... it has a 202 and trimatic running into the transfercase keeping it 4x4
Engine wise going for a G16b from a beleno and adding a mild cam grind is basic, bolt in, reasonably cheap and slightly more power than the rest of the drive train can handle.
Motor could be a 20b ROTOR. However a 13b would be a better fit, either that or a Turbo Hyabusa engine.
The vitara/baleno 1.6 fits in these pretty easy
An FJ20DET or a 4G63T would be sick!!!
I would put a 4jj1 or 1gd
I put a 1.6 baleno in one a few years ago and turbo’d that but if i could do it again I would drop in a honda k24
Alloy front and rear bumper replacement custom made slimmed design.. and as for engine SR20!!! Driftaling every gear tryna keep her straight! 👌🏽😉😂
Love it stock... but if motor swapped... period correct holden 304 5L 😍 all the way!
Should get a JWB customs bar it’s a weld together kit that only costs around $400 just gotta do your own posts/hoops
A cool swap would be using a 2zzge from a celica
4age turbo plz
Cummins 4BT would be a choice.
id put a 3cyl from a gr corolla with the 5sp manual. id aslo retro fit the later model dash (with ac and stereo) as its the same cab
An ls would be sick
YESSS Big things LOVE My samurai!!! 88 🤙 upgraded to the 1.6 8v wish I had the diesels you guys out that way do
Pretty sure they do exotic conversions for them
I would extend the front of the chassis and the put a put the Almighty, six cylinder Barra
That’s a funny looking patrol 😂
Good thing you have lost all the weight Sam, would be a tight squeeze in your previous form 😂. You got the Aircon wrong it has heaps.
😂😂😂😂😂😂
keep it suzuki, put a g13b twincam with a small turbo kit. Pretty cheap.
1.6 suzuki swift sport motor
or the older
1.3 suzuki swift Gti motor
go great in these things , i had an lj50 back in the day and was running an old datsun motor in it and the fucking thing screamed fully registered and all , great little 4x4s that are very capable and off road will show any patrol or Toyota landcruiser owner up 😂
Let's fing go!
V6 out of a commodore. Yes they sound like a cow getting dragged by a tractor but they are cheap, reliable and easy to mod. Plus AC, powersteering and an alternator that does all your charging properly
ZOOK! ZOOK! ZOOK! ZOOK!
Id chuck a 6g72 v6 twin turbod in it😂
Swift M15A engine swap, Isac from MCM is a wealth of knowledge on Sierra engine swaps, as I done the m15a engine swap easy
Back in the day there was a 4agze one ripping around RUclips.
So you bought a Jimny. The Samurai is just a Jimny wide body with an engine larger than 660cc.
Definitely a rotary its so gool little big bird
4jj1 swap . Little sootzuki
I have a Suzuki stockman we’re putting a built 4age in its got a leaf over conversion and etc 🎉
Kun26 would be a hectic swap
Turbo K24 would be the ducks nuts
4A-GE would be sick in this
Poor mans 40 series 😂 keen to see what ya do with it
I might get cooked for this, but I reckon keeping it within the same era, a 3.8 Buick v6 from a vn-vp commo would be rad
Sr20 for sure
My carby coily boy cost the same. Sydney drags?
Sounds bad but eBay has alot of aftermarket parts and assesories for those sierras
I wanna see the 80 wheeled
Put a k20C engine in the little beast
This is sweet! The 1.9 VW TDI engines are pretty good and perfect siE
No just no
Diesels and zooks don’t go together
32x10.00r15 Maxxis Roxxzilla for the tryes. A few boys in NZ have run them on these.
If money didn’t matter a ZZ632 motor would be mad 🤣 10.3L of V8 chev fury. Makes 1000hp @ the crank, from factory on 93 octane
Build a custom winch bar
4AGZE engine conversion would be mint !!
I was waiting watching the clock for 4 to hit. First!
Turbo Hayabusa surely!!
1.6 swift engine with ITB’s 🤙🏼
Suzuki GSX1300R Hayabusa motor.
Yes