can you do more content on this blaster please. like shiming the gears as its hard to measure the motor height and well just more on upgrading this blaster would be great, love your work.
Nothing wrong with that mag it's cool easy to pull apart without tools to keep clean and do maintenance and I love how you can see how many gels you still have and it holds more gels than the M4 mags do
Hey team. I got one of these recently and took it to Donnybrook for a skirmish. I found that while the drum mag I have for my Gen 8.5 JM M4A1 won't fit, the mags for it work perfectly fine, they just don't hold as many gels. Wasn't hugely impressed with it overall, but it isn't as worked as my M4 is anyway.
Blasters Mania already showed it fitting a gen 8, 9 and 10 mag. Gen 8 are seriously tight though, hard to get out. Can also confirm the gen 8 works in my one 👍. Also my stock mags brilliant, I guess someone had to get the crappy one though lol. Great review though, keep it up mate.
something ive not seen covered, i have just got a metal upgrade kit, i can change everything, except the dust cover, it seems to be made to not be disassembled, i have it out of the acr, but it seems both ends of the guide shaft for the dust cover are fixed in a way that it won't come out unless you break it. and the guide rod needs to come out so you can slide the dust cover onto it.
Did you ever figure out how to change the ACR to the metal dust cover? I opened mine up just to swap the charging handle to the other side and that was hard enough as it is. I really wanted to get that metal upgrade kit but after seeing the assembly i don't understand how they expect anyone to instal it.
Looks like the black battery door is to hold the battery in place while allowing it to fire with the stock folded over. (Unlike the HE-E ACR, which won't fire).
@@lowguidoschopshop Will the Scar hold a long round battery, or only the chunky rectangular ones? Maybe they were going for some sort of standardisation akin to what fits in a normal buffer tube, dunno.
Can confirm that you can install a working mag prime switch and the nylon gearbox has cable management built on the fire selector side of the gearbox. Really good blaster and feels really solid. Good review mate.
Have you got any pics of your wiring? I've just seen what you mean by cable management - what I thought were vertical 'locator lugs' on the LHS of GB are actually 'Cable/Wire Tabs'. Small wire though / diameter? And what about after the switch, how do you navigate the back end where that nasty wire-eating block fits up snug against the rear end of the GB? Thanks for any info....
I have this blaster, bought in early April 2020 and all is the same, .... except the magazine. They have changed that to a mag that the same release as an RX AKM magazine, but this mag is not compatible as the terminals for the mag feed are on opposite sides of the feed tube as they are on the AKM.
Great review. But you made a mistake when you wound the outer barrel off you have to remove the 4 hex screws to split the gas reciever and remove the tiny grub screw that locks the outer alloy to the plastic faux gas receiver (it is a tiny little 2mm grub screw and very easy to miss. The steel rod at the front that runs the length of the barrel to the plastic gas port is used to adjust left right and up and down aim of the gels. I would still buy the front plastic barrel stabilizer that has come out for the J - 10 that sits between the barrel and fore stock.
@@popsworld3826 it has been a while. But from memory the standard barrelbis 27cm. I would always fit a longer barrel and cut it down to perfect size anyway so you can fit a hop up.
I got one of these J10's and was wanting to upgrade it's gen 9 gearbox, gelballmod has a high performance upgrade kit that i was looking at getting. just wondering your opinion on it, also I haven't had any issues with my mag so far.
G’day there Guido , wondering if you can help , what’s your opinion on putting a 1.3 spring in a J10 ACR , been told it won’t last long ,so I said how long , with that I got told how long is a piece of string 🤯🥴🤨
Add sticky tape cloth tape I damage that clip pin when I pressed the pin tab under normal circumstances out the box????? Doing a metal upgrade on the top barrel section you can change to metal parts need the dust cover got it out now but don't want to damage it and you need to Remove the steel rod that has the spring so no instructions I'll need to ask you!.
Did you have an issue with hand guard holes lining up with the receiver? the lock pin isn’t able to push through in place unless the guide hole is enlarged..
Hi, i just purchased a j10 and was having trouble with it miss firing gels especially on semi auto. Im using the blues that came with blaster. Just wondering if you are having this trouble? Which gels are best...
apparently its the mag... most forums on firing issues say the mags are junk and using a gen 8 or gen 9 mag fixes the problem...my son brought one of these ARC gen 10 and in my opinion,, they are 220 dollars worth of rubbish... i use the SKD SS gen 8 and have had no problems with it..
No unfortunately. The middle of the charging handle has a notch that sits over a metal rod, so the way it's held in place is that it's sandwiched between said rod and either side of the dust cover. It's sturdier than it appears but it's not held in place by any screws so there's nothing to tighten.
@@lowguidoschopshop you could come up with your own line of upgraded gel blasters and charge a bit more for them with your emblem and that and a signature so it's yours and authenticated I think people would pay good for that mate
All of the Gen 9 gearbox mods (spring, plunger, motor, gears etc) work fine. You will need a model-specific barrel though, as the T-piece is different.
Hey man i have been following u for a bit and love your vids... jhst wanting to no how i can take apart the barrel of the m24 sniper because i want to put an aluminum barrel in but i cant find a way..?
@@lowguidoschopshop thats ok. I thought i would be like the kar98 but thr barrel is stuck or glued togeather or something... cant find anything online about it. But its ok man. Thanks for reply..😁😁😁
You have to cut the outer barrel down the seams with a stanley, but only far enough to get the tpiece out. Alternatively i have seen metal outers being made aswell
Yeah. I ended up getting nail polish wipe down where thr glue is got my razer knife and split the pipe down little bit pass the t.peace so i could slide it out and put a new one. Its a pain in the arse but worth it. And i have seen the m24 is better then the kar they have put more screws in the bolt so it wont fuck up less lol
The J8 mags do fit just very tightly. I've tried a few different style of J8 mags and they do work, just a very tight fit. The M4Ss mags how ever don't fit at all. The may catch is also very poorly designed in my opinion. It's a long and flexible piece of plastic that flexes as shots comes out of the barrel. I lost a may during a game because of that may catch flexing ans dropping the may. Anyway, love your content, hoping to see more
Thanks.guido.for the input and advice.. Your channel ticks bro..helped me learn all about blasters and internals..great mate..should give u a gold utubr thingy
I own one thanks looks nice but the case it's self and that mag snap on first attempt so cloth tape and working 😠 now I've rewired it as the wire is not rated for the use, second the nylon case striped on first open so now the spring lock pin is lose and locks up on a 1.3 spring works on a 1.1 spring and for the switch well the lower one just fell out and that cheap china metal snaped and that spring is hard to find a replacement I also tryed a primer and the set on the switch if you note ground to the supply but it gose to the motor and clip so grounds at 3 plus amps burnt a couple of bits trying it but got it working so 555 timer 3 sec load runs on its own 3.7v 150mah battery volt up regulator board 8v out and a 555 chip 3 diode led and working also the original clip motor is way over rated so added a 5v to 5.5v down board and nice, aluminium barrel red, red cylinder, blue head and plunger green O ring and RZ hopup blue sanded the flash hider as it's just a bit big had a 1.3 spring but on the 1.1 spring current as the case is crap. Also took my bike kit on 4 3.7v supply and can run either 11.1v or 16.2v output on it but the battery I have even though it says 2400mah and 6800mah has less juice than the one sent liers😕 and I have on this one worked a setup to double that range so.
the mags on these are junk... fires best up side down ... ill stick with the SKD SS ... if i was given one of these ARC gen 10,,, i would throw it in the bin... not worth the money in my opinion.....
@@MasadaGbTech all gone now bro,,, in south australia you need a firearms licence to have these plastic toys..the stupid cops waved there magic wand turning them into real guns 🤣🤣 why the hell would i bother to buy a gun safe for gel blasters .. but,, thats the law now..
Great review. But you made a mistake when you wound the outer barrel off you have to remove the 4 hex screws to split the gas reciever and remove the tiny grub screw that locks the outer alloy to the plastic faux gas receiver (it is a tiny little 2mm grub screw and very easy to miss. The steel rod at the front that runs the length of the barrel to the plastic gas port is used to adjust left right and up and down aim of the gels. I would still buy the front plastic barrel stabilizer that has come out for the J - 10 that sits between the barrel and fore stock.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
can you do more content on this blaster please. like shiming the gears as its hard to measure the motor height and well just more on upgrading this blaster would be great, love your work.
You press the little button on mag and pop it out still a pain but works easier than the way you did it.
Nothing wrong with that mag it's cool easy to pull apart without tools to keep clean and do maintenance and I love how you can see how many gels you still have and it holds more gels than the M4 mags do
Hey team.
I got one of these recently and took it to Donnybrook for a skirmish.
I found that while the drum mag I have for my Gen 8.5 JM M4A1 won't fit, the mags for it work perfectly fine, they just don't hold as many gels.
Wasn't hugely impressed with it overall, but it isn't as worked as my M4 is anyway.
Blasters Mania already showed it fitting a gen 8, 9 and 10 mag. Gen 8 are seriously tight though, hard to get out. Can also confirm the gen 8 works in my one 👍.
Also my stock mags brilliant, I guess someone had to get the crappy one though lol.
Great review though, keep it up mate.
Blaster mania? Its from malaysia right?
@@syawalhamidan6539 im pretty sure it's from indonesia
@@dp4advanced234 Malaysia on that one my dude. He's using Malay
something ive not seen covered, i have just got a metal upgrade kit, i can change everything, except the dust cover, it seems to be made to not be disassembled, i have it out of the acr, but it seems both ends of the guide shaft for the dust cover are fixed in a way that it won't come out unless you break it. and the guide rod needs to come out so you can slide the dust cover onto it.
Did you ever figure out how to change the ACR to the metal dust cover?
I opened mine up just to swap the charging handle to the other side and that was hard enough as it is. I really wanted to get that metal upgrade kit but after seeing the assembly i don't understand how they expect anyone to instal it.
Got a link to wear I can buy these upgrades?
Looks like the black battery door is to hold the battery in place while allowing it to fire with the stock folded over. (Unlike the HE-E ACR, which won't fire).
Yeah true, but they managed to make the SCAR open up and still work folded. It wouldn't be a stretch
@@lowguidoschopshop Will the Scar hold a long round battery, or only the chunky rectangular ones? Maybe they were going for some sort of standardisation akin to what fits in a normal buffer tube, dunno.
John Whear , It certainly will👍
Can confirm that you can install a working mag prime switch and the nylon gearbox has cable management built on the fire selector side of the gearbox. Really good blaster and feels really solid. Good review mate.
Have you got any pics of your wiring? I've just seen what you mean by cable management - what I thought were vertical 'locator lugs' on the LHS of GB are actually 'Cable/Wire Tabs'. Small wire though / diameter? And what about after the switch, how do you navigate the back end where that nasty wire-eating block fits up snug against the rear end of the GB? Thanks for any info....
I have this blaster, bought in early April 2020 and all is the same, .... except the magazine. They have changed that to a mag that the same release as an RX AKM magazine, but this mag is not compatible as the terminals for the mag feed are on opposite sides of the feed tube as they are on the AKM.
Great review. But you made a mistake when you wound the outer barrel off you have to remove the 4 hex screws to split the gas reciever and remove the tiny grub screw that locks the outer alloy to the plastic faux gas receiver (it is a tiny little 2mm grub screw and very easy to miss.
The steel rod at the front that runs the length of the barrel to the plastic gas port is used to adjust left right and up and down aim of the gels. I would still buy the front plastic barrel stabilizer that has come out for the J - 10 that sits between the barrel and fore stock.
nice quad post from hitting return, Do I get some sort of internet squid award trophy?
nice quad post from hitting return, Do I get some sort of internet squid award trophy?
Thank you for the teardown videos. The inbarrel by default is about 40cm or below? I'm about to upgrade it btw.
@@popsworld3826 it has been a while. But from memory the standard barrelbis 27cm. I would always fit a longer barrel and cut it down to perfect size anyway so you can fit a hop up.
@@lowguidoschopshop Thanks for your insight, mate. I'm going to progress with 40cm so i could install hop-up and socom silincer on it.
So my ACR takes gen 8 mags but not gen 9’s
I got one of these J10's and was wanting to upgrade it's gen 9 gearbox, gelballmod has a high performance upgrade kit that i was looking at getting. just wondering your opinion on it, also I haven't had any issues with my mag so far.
This video is perfect! As I just have received a second hand ACR!
What are your thoughts on Dean connectors with the 11v batteries? Any tips?
What battery connector is it. Deams or a tamiya connector??
Does it come with the tactical rail on handguard when u purchased it because most ACR J9 reviews i saw dont have the rail.. And where u buy it?
Only top rail
I took a picatinny rail off a spare vector cut it to size in screwed it on the bottom so I could put a laser sight or a torch on it
AFAIK the J9/10 Gen didn't have under rail attachment, only the V2 have it.
it's J10 coz it's nylon gbox shell haha. btw, stock gbox can withstand up to 1.5 spring or not until the gear/piston strip out?
so is the J9 that now comes with the same nylon shell a J10?
@@lowguidoschopshop yes
Can you review the m24?
Hahahahahahaha
And he did. 😎
G’day there Guido , wondering if you can help , what’s your opinion on putting a 1.3 spring in a J10 ACR , been told it won’t last long ,so I said how long , with that I got told how long is a piece of string 🤯🥴🤨
Is the spring guide metal sir?or still nylon?
Its nylon still in this model.
What spring and o ring was put in.
do you have a video when you re-assemble the blaster sir?
Add sticky tape cloth tape I damage that clip pin when I pressed the pin tab under normal circumstances out the box????? Doing a metal upgrade on the top barrel section you can change to metal parts need the dust cover got it out now but don't want to damage it and you need to Remove the steel rod that has the spring so no instructions I'll need to ask you!.
Great videos mate, you'd think this bloke would get sponsorship from somewhere on reviewing thease things he's really good.
Did you have an issue with hand guard holes lining up with the receiver? the lock pin isn’t able to push through in place unless the guide hole is enlarged..
no didnt have an issue.
Must've been some defect ..
is there anyway of enabling this blaster to shoot up to 400fps
Upgrade the gearbox, the hop up, spring and you're done.
Oh, and also if you wanna make it fire faster, probably want to change the battery to 11.1v
Can you do a video on how to put it back together at all. And how to a line the motor up with the gearbox as well.
When you put the acr back together how did you a line the motor with the gear in side that it goes on
assemble GB to handle with receiver off and only one side of the GB on
Hope that when you replace gears with metal ones that not being able to adjust motor will not cause any ao problems.
Almost definitely will.
I'll be interested if good company's like Tokyo Marui or krytac make jelblasters... seems kinda hit or miss in quality.
Too bad they're only focused on Airsoft, not Water Gel Gun, but considering the price .. well ..
im wondering i u ever tried to convert to mag prime?
Yes. The switch just goes into the top of the gearbox. Justnlike J9
@@lowguidoschopshop ohh cool. U got
Any video or tutorial?
@@alvinkevinalfonso4326 ruclips.net/video/lcNt7BFTG14/видео.htmlsi=BE5XBMvTXkyfiqt5
this is for a J9 but it is the same for J10.
Wondering if the barrel is loose in the t piece, can you just pull it out to change barrel or is it glued in?
They are glued in.
@@lowguidoschopshop ok so il need a new t piece to change barrels, thanks, love your videos btw
@@troyclarke3825 you can drill it out if you are really careful not to drill alk the way through.
Just as long as I can get my bruisemaster in lol
soak in hot water then pull it
Hi, i just purchased a j10 and was having trouble with it miss firing gels especially on semi auto. Im using the blues that came with blaster. Just wondering if you are having this trouble? Which gels are best...
Use milkies, green and blue gels dont feed properly through the mag
Liam Dick cheers i found out the oranges and milkys.
@@LeonardioAU Milkies are terrible in mine.
apparently its the mag... most forums on firing issues say the mags are junk and using a gen 8 or gen 9 mag fixes the problem...my son brought one of these ARC gen 10 and in my opinion,, they are 220 dollars worth of rubbish...
i use the SKD SS gen 8 and have had no problems with it..
That silver edge gear box fit in there?
yep
but check out the mk tactical metal v² box it leaves aps for dead
is it possible to fit the m4a1 gen 9 gearbox in the shell of the acr j10 and if so where can you get the acr j10 outer shell
Both gearbox are the same.
Could I fit a Fighting Bros 4.0 gearbox in the Gen10 ACR-J10 Gel Blaster, Anyone?
Anyway to tighten the charging handle??
No unfortunately. The middle of the charging handle has a notch that sits over a metal rod, so the way it's held in place is that it's sandwiched between said rod and either side of the dust cover. It's sturdier than it appears but it's not held in place by any screws so there's nothing to tighten.
My motor won’t shoot the gels properly and I’ve barely used it please help
As in it went from shooting to just making a weird noise and I’m freaking out because the company won’t reply
probably stripped gears.. I have made plenty of videos about replacing gears.
@@lowguidoschopshop thank you for replying your the only person who has I’m subbing and will definitely look at those vids😊
Is the thread on the flash hider reverse thread? For hopups.
yes
@@lowguidoschopshop your a legend, thank you.
And for anyone interested in why I ask. The DKJ10 hopup will thread straight onto the LDT HK416D.
Where did that spring come from that fell out when you released the mag release 😢
sorry, I just re watched the video it was the mag release spring.
it was the mag release it came out of the hole under the mag release button.
Could you change that charging handle to metal so it will be able to take a bit more ??
I should hope someone will release an alloy handle kit soon
@@lowguidoschopshop I enjoy your videos Guido you're awesome mate do you fix gel blasters for people ?
@@lowguidoschopshop you could come up with your own line of upgraded gel blasters and charge a bit more for them with your emblem and that and a signature so it's yours and authenticated I think people would pay good for that mate
@@jamiesuvo7420 these do exist..
@@lowguidoschopshop very cool mate very cool
So you can use gen 9 upgrade parts for this?
All of the Gen 9 gearbox mods (spring, plunger, motor, gears etc) work fine. You will need a model-specific barrel though, as the T-piece is different.
Hey mate, can a V2 box fit in this receiver or just a Gen9?
Hey lazy lazz, as he is doing a teardown he said it does
This is Gen/J 10, not V2.
Hey man i have been following u for a bit and love your vids... jhst wanting to no how i can take apart the barrel of the m24 sniper because i want to put an aluminum barrel in but i cant find a way..?
I dont yet have an M24 so I'm sorry, I dont really know
@@lowguidoschopshop thats ok. I thought i would be like the kar98 but thr barrel is stuck or glued togeather or something... cant find anything online about it. But its ok man. Thanks for reply..😁😁😁
You have to cut the outer barrel down the seams with a stanley, but only far enough to get the tpiece out. Alternatively i have seen metal outers being made aswell
Yeah. I ended up getting nail polish wipe down where thr glue is got my razer knife and split the pipe down little bit pass the t.peace so i could slide it out and put a new one. Its a pain in the arse but worth it. And i have seen the m24 is better then the kar they have put more screws in the bolt so it wont fuck up less lol
The J8 mags do fit just very tightly. I've tried a few different style of J8 mags and they do work, just a very tight fit. The M4Ss mags how ever don't fit at all. The may catch is also very poorly designed in my opinion. It's a long and flexible piece of plastic that flexes as shots comes out of the barrel. I lost a may during a game because of that may catch flexing ans dropping the may. Anyway, love your content, hoping to see more
Yeah fuck proof reading!
everyone go buy this man a coffee seriously he does fantastic work! it's only $5.34 AUD do itttt
It used to be $4 but the AU dollar right now.. still do what this man says.
@@lowguidoschopshop yeah I know but what's a few bucks for the great job you do. I always wonder what watch you'll have on 😅
should i buy this or the scar v2
this
Yo my gear box isn't coming out of the grip spot
I hope they don’t ban gel guns.
I slowly turned my acr into a beast
2:30 fiddle farting around..........best call I have heard from a fellow Aus. in a long time lol
Fart-assing around is my favourite.
I think the Gen10 comments come from the J10 part of the name. Confusion by those not in the know. Thanks for clarifying it simply :D
What! The pins aren't captive like a HK!
Can we make a magazine priming switch on ACR like M4, pal ?
yes its exactly the same.
@@lowguidoschopshop thanks bro
can i put a fighting bro gearbox in this
While you probably could. Don't.
@@lowguidoschopshop Why ?
@@AangDknight because the standard J9 gearbox is superior to the fighting bro.
@@lowguidoschopshop It is ? How ?
uh oh, how do i put it back together!! URGENT!!
just play the video in reverse.
Mine is rubbish. It shreds the gel balls. Doesn’t fire, and it’s a level one upgrade custom build.
Worse than the AKM 47.
Just my luck.
Thanks.guido.for the input and advice..
Your channel ticks bro..helped me learn all about blasters and internals..great mate..should give u a gold utubr thingy
Love your vids, it deserves more comment's.
Mate...you start pulling it apart before you finish a tour of the assembled gun...why are you even pulling it apart at all?
its what I do
I own one thanks looks nice but the case it's self and that mag snap on first attempt so cloth tape and working 😠 now I've rewired it as the wire is not rated for the use, second the nylon case striped on first open so now the spring lock pin is lose and locks up on a 1.3 spring works on a 1.1 spring and for the switch well the lower one just fell out and that cheap china metal snaped and that spring is hard to find a replacement I also tryed a primer and the set on the switch if you note ground to the supply but it gose to the motor and clip so grounds at 3 plus amps burnt a couple of bits trying it but got it working so 555 timer 3 sec load runs on its own 3.7v 150mah battery volt up regulator board 8v out and a 555 chip 3 diode led and working also the original clip motor is way over rated so added a 5v to 5.5v down board and nice, aluminium barrel red, red cylinder, blue head and plunger green O ring and RZ hopup blue sanded the flash hider as it's just a bit big had a 1.3 spring but on the 1.1 spring current as the case is crap. Also took my bike kit on 4 3.7v supply and can run either 11.1v or 16.2v output on it but the battery I have even though it says 2400mah and 6800mah has less juice than the one sent liers😕 and I have on this one worked a setup to double that range so.
Thx man, it really helped
☺😊😀😁😂5 Smile's (It is a nice one but.)
the mags on these are junk... fires best up side down ... ill stick with the SKD SS ...
if i was given one of these ARC gen 10,,, i would throw it in the bin... not worth the money in my opinion.....
🤣🤣 give it to me then I've completely rebuilt one of these shooting over 400 fps
@@MasadaGbTech all gone now bro,,, in south australia you need a firearms licence to have these plastic toys..the stupid cops waved there magic wand turning them into real guns 🤣🤣 why the hell would i bother to buy a gun safe for gel blasters .. but,, thats the law now..
whats wrong with your thumb nails lol
Best breakdown video on RUclips cheers bro
Great review. But you made a mistake when you wound the outer barrel off you have to remove the 4 hex screws to split the gas reciever and remove the tiny grub screw that locks the outer alloy to the plastic faux gas receiver (it is a tiny little 2mm grub screw and very easy to miss.
The steel rod at the front that runs the length of the barrel to the plastic gas port is used to adjust left right and up and down aim of the gels. I would still buy the front plastic barrel stabilizer that has come out for the J - 10 that sits between the barrel and fore stock.