Easy tip: Use a wood and put it at the wall and pull it up (If you realize that you didn’t get the truck as well just cut the trees and throw it on the land) “I might have little but grammar mistakes”
i started the project im first making a supplyline for the project because im not gonna bother bringing up materials one by one for a skybase and to bring down future gold
bro i spent like 30 minutes making the first bridge and then one of them was 1 stud above sp it wasnt fused and now i can't put it normally cuz its the opposite than u showed in the green rectangle so it opens the other way plz help
bro im trying to weld the fat doors to each other for 4 hours but its not working i mean i weld them but only 2 fat door working ,other doors are just staying ,not moving with glass door.
@@aa_aquahunts I'm glad you were able to make it! I haven't had any issue myself with the welding when it's lowered and i reload, but i can definitely see how it would break
if you have placed all 90 doors and it doesn’t reach the end, while your door bridge is in the down position go to the very end (closest to the mountain) and on each of the 2 end doors click E then move and cancel. this will teleport the 2 end doors back to the up position and open them. once they are in the up position you can just continue adding doors like you have been. once you feel you have enough doors added, simply bring the rest of the doors to the up position by interacting with the glass door, and use the reload technique to weld and close the doors you added.
i don't have a console so i'm not 100% sure but you can try with just a glass door, smooth wall, and 1 basic door just to see if it welds and if it does it should work for all 45 doors.
@@never_sever2710 yes 45 for each side, is each door fusing 1 stud into the door below it? if they aren’t inside of each other the won’t weld into 1 bridge. also make sure the bottom wood door is fusing into the glass door.
If you are worried about bumpy doorknobs use a fat door
i'm gonna pin this cuz i meant to add it in the tutorial lol
@@BananaRat1how many fat door will it take for this??
@@adrian-ik3te same amount as normal doors
hey guys this is my first video/tutorial on this channel
i will be answering any comments
plus sub ❤
Hey, how much doors did you put on each side?
@@Spaceyguy_animates 45 each side
@@BananaRat1 Thanks!
Easy tip:
Use a wood and put it at the wall and pull it up
(If you realize that you didn’t get the truck as well just cut the trees and throw it on the land)
“I might have little but grammar mistakes”
i started the project im first making a supplyline for the project because im not gonna bother bringing up materials one by one for a skybase and to bring down future gold
bro i spent like 30 minutes making the first bridge and then one of them was 1 stud above sp it wasnt fused and now i can't put it normally cuz its the opposite than u showed in the green rectangle so it opens the other way plz help
What to do if i left my bridge towards the mountain, and reloaded and now bridge is broken
yo thanks
mobile players 💀☠️
I have a door bridge and i am on mobile
I have door bridge on my slot 1: 1 to swamp and 1 to palm (I built those back in 2021)
Using mobile -
I have snow glow wood bridge
I building on phone
@Real_Guest_Gaming14do u mean mouse?
Question, How many doors it will take to go to the savannah?
W, can you do the same method for palm wood? and make a video
i believe so, it would just have to be taller since the palm islands are farther away. i will do some testing and i may make a tutorial :D
@@BananaRat1 Thanks
i have a new better design that i believe will work for the palm wood, if it does i should have a new tutorial out in a few days
new tutorial out NOW (go check it out xd)
Is the zombie wood only obtainable during halloween?
no, zombie wood and gold wood both spawn in the swamp at any time
bro im trying to weld the fat doors to each other for 4 hours but its not working i mean i weld them but only 2 fat door working ,other doors are just staying ,not moving with glass door.
idk what i should do, i became crazy
Is it possible to make bridge wider, for easier and less precise driving?
yes, you can use fat doors. same mechanics, you just have to space the 2 bridges a little further apart
El día en que agan: "Como llegar a la madera de palmera con puertas" van a explotar mis calzones.
I hope your pants are ok after exploding
His base is shaped like the b2 plane
since you are using 90 doors, will it be 45 each path?
yes
@@BananaRat1 thanks i made the bridge, the only thing is when i forgot to bring it up when reloading it needs to be mended again
@@aa_aquahunts I'm glad you were able to make it! I haven't had any issue myself with the welding when it's lowered and i reload, but i can definitely see how it would break
Great bro🎉
thx 🙏
Is it possible that you could do a tutorial on the quickest way to make money as a new player and feature my comment extra
i'll add it to my list! thx for the suggestion, i'll be sure to include your comment 👍
@@BananaRat1 thanks
My door goes the other way
if you’re doors are opening the opposite way you need to open them differently before you move them to the bridge.
when i reloaded only the bottom door welded with the glass one and none of the others how do i fix
are all of the doors fusing into each other? if they are just on top of each other then they won't weld
@@BananaRat1 the ones above are all welded but they are like not facing the right way
@@milkmanclan9875_star9 is the bottom door (not glass) fusing into the door above it?
How do you extend it?
if you have placed all 90 doors and it doesn’t reach the end, while your door bridge is in the down position go to the very end (closest to the mountain) and on each of the 2 end doors click E then move and cancel. this will teleport the 2 end doors back to the up position and open them. once they are in the up position you can just continue adding doors like you have been. once you feel you have enough doors added, simply bring the rest of the doors to the up position by interacting with the glass door, and use the reload technique to weld and close the doors you added.
How long did this take you?
about 2-3 hours, however it could take longer if you make mistakes.
Thank you!
@@lumbertycoonresearcher you’re welcome 👍
w video
thx bro 💯
why dont u do the flip rotate bug method
never heard of it, i will look it up to see if i should make an updated tutorial later. thx for asking :D
Does this work for console?
i don't have a console so i'm not 100% sure but you can try with just a glass door, smooth wall, and
1 basic door just to see if it welds and if it does it should work for all 45 doors.
Couldn’t u use fat doors?
@@LukeSweeney-t3h yes you can. i meant to include it in the video but the clip got deleted somewhere in editing process.
palm tree version 🙏
i will experiment with it and see if i can figure out a way. thx for asking :D
yo bro i got a new design that should work for palm wood, if it does i'll be uploading a new tutorial for it in a few days
@@BananaRat1 oh bet thanks
don t know how to explain
you don t know how to explain brother, Brooooo annoying
is there a specific problem you’re having? i might be able to help
How many doors should I put in one part 45 no? the doors are not opening in the same time
@@never_sever2710 yes 45 for each side, is each door fusing 1 stud into the door below it? if they aren’t inside of each other the won’t weld into 1 bridge. also make sure the bottom wood door is fusing into the glass door.
So annoying