Same issue using two 12's and the Rane 72. First time it happened was using the 2018 macbook with mojave os. Then using with 2015 mac High Sierra OS it was doing the same but this time when i would move the pitch the screen would glitch.
Hello, I'm sure it's Serato Problem. I use Serato DJ Pro Since One year with Numark V7 (motorized platter's like your Rane twelve). I same the same problem just after install the 2.1 version (Same with 2.1.1). I have created ticket: ----------------- Hi, Since Serato DJ Pro version v2.1 (same with v2.1.1). I notice sound shift problem. Indeed, at the end of track (70/80% of the track), the sound jump on one of the track and shifts my mix (just a little jump and only one). It's very annoying and scary. I don't have this problem with v2.0.5 (I downgrade to this version because i have the sound shift problem on v2.1 and v2.1.1). I have two macbook pro retina (one early 2013 other mid 2014) with macOS Mojave 10.14.3. I have the same problem on the two macbook pro with v2.1 and v2.1.1 and i don't have the problem with v2.0.5. For information, i have 2 x Numark V7 work fine. Two macbook are optimized with your guidelines. Can you resolve this problem please? Thank you very much Best Regards ---------------------- I have this response from serato: Hi there, Thanks for reaching out. Unfortunately, I found it difficult to determine from your message the nature of your issue. I'd love to be able to help out, please let me know if I can do so. Can you please send a video, showing the issue that you're facing? Kind Regards, ----------------------------------------------- No time to make video lol I go back to v2.0.5..... I think i send your video to serato
@@ridvankornaz hi Mr DJ, I have make many and many tests for the Serato ticket and i have found one issue to fix the problem. I have changed all the options in parameters and i have discovers that when i am in 45T mode i have the same problem like you. And when i put 33T mode, the problem disappears. May be can you try to change this option to 33T mode instead of 45T mode? For me, i have this jump problem already at the same time (5'30) You can see all my tests here: - Test 1 buffer 1ms : refresh 60 : 45T : jump at 5'23 in video -> ruclips.net/video/u9n8J8SjSDA/видео.html - Test 2 to be sure buffer 1ms : refresh 60 : 45T : jump at 5'23 in video -> ruclips.net/video/DQ6SlqUXd8Q/видео.html - Test 3 buffer 5ms : refresh 30 : 45T : jump at 5'23 in video -> ruclips.net/video/iGaG9XL4Bck/видео.html - Test 4 buffer 5ms : refresh 30 : 33T : No jump, no problem -> ruclips.net/video/Sf6htE7QBxg/видео.html - Test 5 to be sure buffer 5ms : refresh 30 : 33T : No jump, no problem -> ruclips.net/video/d5R32S6wZbY/видео.html - Test 6 back to 45T buffer 5ms : refresh 30 : 45T : jump at 0'45 (i have not recorded since beginning but jump at the approx same time like can you see) -> ruclips.net/video/s-dV3Zu5O0U/видео.html
@@ridvankornaz Damn, That means that is not the same exact problem? Maybe the same problem but with different options according the hardware? I don't know. Have you this problem with v2.0.5 of serato dj pro? On Serato DJ Pro v2.0.5 i don't have the jump problem with 45T. Only since 2.1 and 2.1.1. The jump is random in the song position? or like me, always in the same moment (5'37 for me)? Have you try change some options and test when you have the jump or not like me? (right, that take more and more time 😣)
@@technologicdjset8731, i didnt try 2.0.5, but it looks like same problem, this happens randomly on my side, it happens when touching the vinyl, if i let them play without touching the vinyl, there is no jump
no but I'm thinking its Serato and not the controller, because the controller doesn't control the sync of the tracks. And I noticed in the past if the computer your running Serato on isn't up to par then these things happen. I just ordered my twelves today and will try them out for a few weeks and if I see anything with them ill be buying regular turntables
That sucks man, how are you mixing with this problem/? have you tried a powered usb hub? I was told by Serato they are aware of the problem and are working on it but do not have a date as of yet when it will be fixed.
Okay so I was wrong about my theory I think. I just got my twelves today and had the same thing happen to me as it did in your video. Also another thing I noticed was that one deck always faster than the other even though both at zero pitch and bpm remains the same in Serato. What I did was just play the same tracks through my mixer without the twelves and the tracks stayed locked 100% of the time. I don’t know if it’s the twelves or a combination of the twelves and Serato Or like someone said out MacBooks. Anyway I returned them and ordered reloop 7000s and will use Serato that way. Hopefully no more problems. I will report back after I get the turntables.
Apparently Serato has been able to recreate the problem and are in the process of fixing it. Not sure how long that will take. Try Serato version 2.0.5 for now. I haven't experienced any glitches since using that version
both have the same issue, one is with connectors on rear and one is with connectors on bottom (new one) dont sure how to check the firmware version of them
@@ridvankornaz i have the original it often bugs out.. Freezes Serato, or randomly turns off, amongst other things. I need to send it in.. But haven't done it. Good luck to you!
see if both have the issue which doesn't make sense its most likely Serato and your computer. this is the first time I have seen a post like this and for it to be old version and new version. I BELIEVE that if it was the controller you would see the BPM changing and/or change when the skip happens. If you look at your deck BPM it stays locked the entire time @ 105.8 This confirms that the deck isn't responsible for this and confirms Serato and or PC are having trouble processing all of the information and keeping your tracks synced together. Im an electrical engineer by trade and I might be wrong but everything I see tells me its a software problem. I hope this helps I would run a CPU and Memory Monitor while your using your equipment and see how much RAM and CPU usage is being used up.
![DDG & G Herbo - Nosey [Official Video]](http://i.ytimg.com/vi/I9Ra0Zc2NlQ/mqdefault.jpg)
![Cody Johnson - I'm Gonna Love You (with Carrie Underwood) [Official Music Video]](http://i.ytimg.com/vi/yy9PuYMU29g/mqdefault.jpg)
Same issue using two 12's and the Rane 72. First time it happened was using the 2018 macbook with mojave os. Then using with 2015 mac High Sierra OS it was doing the same but this time when i would move the pitch the screen would glitch.
Just started to have the same issue. Did anyone fix it?
yes its fixed on newer versions, dont remember the exact version where it was fixed
Hello,
I'm sure it's Serato Problem. I use Serato DJ Pro Since One year with Numark V7 (motorized platter's like your Rane twelve). I same the same problem just after install the 2.1 version (Same with 2.1.1). I have created ticket:
-----------------
Hi,
Since Serato DJ Pro version v2.1 (same with v2.1.1). I notice sound shift problem. Indeed, at the end of track (70/80% of the track), the sound jump on one of the track and shifts my mix (just a little jump and only one). It's very annoying and scary. I don't have this problem with v2.0.5 (I downgrade to this version because i have the sound shift problem on v2.1 and v2.1.1). I have two macbook pro retina (one early 2013 other mid 2014) with macOS Mojave 10.14.3.
I have the same problem on the two macbook pro with v2.1 and v2.1.1 and i don't have the problem with v2.0.5.
For information, i have 2 x Numark V7 work fine. Two macbook are optimized with your guidelines.
Can you resolve this problem please?
Thank you very much
Best Regards
----------------------
I have this response from serato:
Hi there,
Thanks for reaching out. Unfortunately, I found it difficult to determine from your message the nature of your issue.
I'd love to be able to help out, please let me know if I can do so.
Can you please send a video, showing the issue that you're facing?
Kind Regards,
-----------------------------------------------
No time to make video lol I go back to v2.0.5..... I think i send your video to serato
yes you can send this video to serato, i think also its same issue, the twelve (i think same on numark v7) send just a contious midi signal to serato
@@ridvankornaz hi Mr DJ, I have make many and many tests for the Serato ticket and i have found one issue to fix the problem. I have changed all the options in parameters and i have discovers that when i am in 45T mode i have the same problem like you. And when i put 33T mode, the problem disappears. May be can you try to change this option to 33T mode instead of 45T mode? For me, i have this jump problem already at the same time (5'30) You can see all my tests here:
- Test 1 buffer 1ms : refresh 60 : 45T : jump at 5'23 in video -> ruclips.net/video/u9n8J8SjSDA/видео.html
- Test 2 to be sure buffer 1ms : refresh 60 : 45T : jump at 5'23 in video -> ruclips.net/video/DQ6SlqUXd8Q/видео.html
- Test 3 buffer 5ms : refresh 30 : 45T : jump at 5'23 in video -> ruclips.net/video/iGaG9XL4Bck/видео.html
- Test 4 buffer 5ms : refresh 30 : 33T : No jump, no problem -> ruclips.net/video/Sf6htE7QBxg/видео.html
- Test 5 to be sure buffer 5ms : refresh 30 : 33T : No jump, no problem -> ruclips.net/video/d5R32S6wZbY/видео.html
- Test 6 back to 45T buffer 5ms : refresh 30 : 45T : jump at 0'45 (i have not recorded since beginning but jump at the approx same time like can you see) -> ruclips.net/video/s-dV3Zu5O0U/видео.html
HI @TechnoLogicDJSet
i just watched your videos, is the same jump. same issue.
im always on 33T, never used 45T, also the video is on 33T
@@ridvankornaz Damn, That means that is not the same exact problem? Maybe the same problem but with different options according the hardware? I don't know. Have you this problem with v2.0.5 of serato dj pro? On Serato DJ Pro v2.0.5 i don't have the jump problem with 45T. Only since 2.1 and 2.1.1. The jump is random in the song position? or like me, always in the same moment (5'37 for me)? Have you try change some options and test when you have the jump or not like me? (right, that take more and more time 😣)
@@technologicdjset8731, i didnt try 2.0.5, but it looks like same problem, this happens randomly on my side, it happens when touching the vinyl, if i let them play without touching the vinyl, there is no jump
it is still jumping on 2.2.2
Did you reach out to rane about this problem ?
yes there is an ticket about, but dont have a solution yet, did you have similar issues ?
no but I'm thinking its Serato and not the controller, because the controller doesn't control the sync of the tracks. And I noticed in the past if the computer your running Serato on isn't up to par then these things happen. I just ordered my twelves today and will try them out for a few weeks and if I see anything with them ill be buying regular turntables
That sucks man, how are you mixing with this problem/? have you tried a powered usb hub?
I was told by Serato they are aware of the problem and are working on it but do not have a date as of yet when it will be fixed.
It is been fixed on latest SDJ
I spoke to Serato yesterday and they said they are still working on the fix.
Not sure what your experiencing.
Ridvan Kornaz mine still does it even on Serato 2.3
Okay so I was wrong about my theory I think. I just got my twelves today and had the same thing happen to me as it did in your video. Also another thing I noticed was that one deck always faster than the other even though both at zero pitch and bpm remains the same in Serato.
What I did was just play the same tracks through my mixer without the twelves and the tracks stayed locked 100% of the time.
I don’t know if it’s the twelves or a combination of the twelves and Serato
Or like someone said out MacBooks.
Anyway I returned them and ordered reloop 7000s and will use Serato that way. Hopefully no more problems.
I will report back after I get the turntables.
yes i can confirm that decks not exactly playing same speed at zero speed, but i can live with that, more important is to get the glitch fixed
with me this happens when i do long mixed and when i am pitch banding by touching the platter ... @@ridvankornaz
Hi, this happens nudging from the platter or/and from the vinyl, im also sure its an serato issue, but its still there also on current sdj
2.1.1
@@ridvankornaz yess it's Serato problem. Play with Serato 2.0.5 -> that version = stable / no glitch... So Serato must fix this !!
Mine do this have you found a fix yet?
Apparently Serato has been able to recreate the problem and are in the process of fixing it. Not sure how long that will take. Try Serato version 2.0.5 for now. I haven't experienced any glitches since using that version
@@Junglejunkeeyyz Problem is with older version as well
@@Venomynous yea I just read that this morning in the serato forum. I hope they fix this quickly.
Same issue ... I got a ticket for this with Serato ... Waiting the answer.
Is this the updated Rane or the original
both have the same issue, one is with connectors on rear and one is with connectors on bottom (new one) dont sure how to check the firmware version of them
@@ridvankornaz i have the original it often bugs out.. Freezes Serato, or randomly turns off, amongst other things. I need to send it in.. But haven't done it. Good luck to you!
@@ridvankornaz do you use tidal? I've been having issues with that and Serato.. And I can't find anyone having the same issues
@@YaboiBlkRob no, im not using tidal or soundcloud
see if both have the issue which doesn't make sense its most likely Serato and your computer. this is the first time I have seen a post like this and for it to be old version and new version.
I BELIEVE that if it was the controller you would see the BPM changing and/or change when the skip happens. If you look at your deck BPM it stays locked the entire time @ 105.8
This confirms that the deck isn't responsible for this and confirms Serato and or PC are having trouble processing all of the information and keeping your tracks synced together.
Im an electrical engineer by trade and I might be wrong but everything I see tells me its a software problem. I hope this helps
I would run a CPU and Memory Monitor while your using your equipment and see how much RAM and CPU usage is being used up.