Rane Twelve Pitch Calibration
HTML-код
- Опубликовано: 8 сен 2024
- Instructions for calibrating the pitch control on your Rane Twelve. If your 0 point is not correct and the pitch on your Twelves doesn't match then you can use this video to fix that problem. I got these instructions from a Rane customer service rep.
Thank you Again Brother..... 🙏🏿🤜🏿
So I just purchased a pair of used Rane Twelves from Guitar Center. I pray that I don't have to worry about this. Although, if I do, I have this video to fall back on. Thank you.
Man thank you so much. Mine was off just a little bit and it was absolutely driving me nuts lol it worked perfectly
You're Welcome! I'm glad it helped.
Thank You so much for this video. I had this issue since 3 years
Going back through some of your past tutorials because 4 some reason I figured you would have blessed us with a tutorials on another one of Rane’s Issues. Thank you again for providing us with The Solution that RANE should be giving its customers. Honestly I’m loosing a little of my respect for Rane due to the difficulty you have contacting someone who actually is a troubleshooting specialist for the mixers & the 12 controller. 🙏🏿🙏🏿🙏🏿🙏🏿
Were you having issues with the Twelves? I really wish they would have worked out for me.
Yes I’m having trouble with the contour control knob on channel 2. When I raise the upfader on channel 2 there’s no volume when I raise or lower the upfader unless I turn the contour knob all the way to the right. If I turn the contour knob to 6 o’clock the volume is very low. I don’t have that issue with the channel 1 contour knob, what do you think that could be?? Please give me your input when you have time; your wisdom on this is greatly appreciated. Thank you 🙏🏿
Bro! You saved me a lot of frustration. Thanks for this. I literally JUST got my replacement back from Rane and it wasn't properly calibrated. Thanks fam!
Screwface Muziq it’s crazy that this info isn’t in the manual. I almost sent my Twelve back for a refund until I called Rane.
YES Brother. THANK YOU! I had no idea why my 0 pitch light wouldn't stay on. This is my first time using controllers instead of regular tables.... Damn, I miss my 1210's, lol.
Great info much needed😅 😅
Thanks a lot big bro for that information. It was well needed and worth it. God Bless you & I wish it was more out there like yourself sharing helpful content
Thanks! I’m glad it helped!
Thank you so much for making this video. Greatly, greatly appreciate it.
Thank you that helps alot much love and respect from South Africa
You're Welcome. I'm glad this info is helping people.
Both of Rane 12s pitches were flawless out the box
Jay Werx that’s how it should be! I’m loving this Twelve, how are you liking yours?
logisticalstyles I wish I had bought the 12s sooner. I’m never looking back
Great fix to this, thank you 👍
Thanks man. I swore I was crazy Fixed the problem immediately.
I just purchased 2 used Rane Twelve's and the pitch wasn't working (it wouldn't slow or speed up the track). I did this and now the pitch behaves properly. Thanks!!!
Wow! Thank you
thanks man i have a bit of pitch flutter,nothing major but this good to know .My 12 mk2 has the power button in a recess at the back so it going to be a bit harder to do this but i will give it a try if i need to.Otherwise i really like the deck and i will be getting the second as soon as i can.Its nice to have the feel of a turntable again
Might have to check mines. Thanks.
I just got 2 Rane 12's and one of them was a slightly out of pitch, i followed these steps and and it appears to still do the same thing, Easy to follow walk through though!
Bro!! Thank you 🙏
No problem!!
Just want to say thanks man I had the same issue and your video helped me out!
You’re welcome! I’m glad it helped!
Thank you so much Bro for this video !! i began to turn crazy about the pitch when i was mixing oh Yeah thanks !!!
Thank you!
Very helpful 👍🏾
Danke!!!
Awesome brother.
That shirt is 🔥🔥🔥🔥🔥😎
Dallas Slim thanks!
Hey man -great find! Didn't work for my mk1 though :(
got both of my 12s now.Im just getting used to the feel of them.I think i like a lower torque on these and i might put actual vinyls or old time codes on these.I m well out of practice on spinning platters.Ihave not tested if both decks are ok on the dots but next time im on them i will check .Took some pics of the new gear as well as video.Will post that soon
Nice! I think you will really like them. They make DJing more fun than the platters that don’t spin. Hopefully you won’t have any issues. Looking forward to the video!
These Rane twelves suck so bad I’ve heard of so many motor issues with them. The mk1’s were straight defective from the beginning. I’ve never liked Rane and they just discontinue most of their mixers due to unresolved driver issues. Even the Rane One was so limiting. Pioneer is such a better company I’m loving the Rev 7.
Yeah, I really tried to work with these over a couple of years including the MKII. They all had the same issues. Every day i see new examples of them messing up. I really wanted to like them but I ended up selling them and going back to turntables and using Phase.
@@logisticalstyles i still play traditional vinyl so the fact the twelves were only a dvs solution just didn’t make sense to me. I have my Technics and phase…however i did sell my S9 for the Rev 7. The best thing about that though i can still use my t-tables with the Rev 7.
an update on my pitch flutter.Turns out i did not place the control disc on the spindle correctly hence an inaccurate playback so no need for any other measures.However this info is still useful to know should i ever have any more trouble
I’m glad you were able to figure out the issue!
Wow! Very impressive but why wouldn’t something so important be in the manual?
Good Question. I did notice that they eventually added this to a Tip and Tricks page on the website. When I had this problem a year ago the info was no where to be found. I had to email Rane to get this info.
Awesomeness thank u 🙏🏽
Me too thanks for the tech tip! 👊🏼
I Have two Twelve mk2 bit one still little bit vibráte Up And Down some about 0.2 bpm
If the calibration doesn't fix it then you may need to contact Rane support.
Good looking 🙏🏽
Hi Logisticalstyles, can make you a video of if you can't choose deck one or deck two because the turntable flashes?
I can’t because I no longer have the Twelves. I sold them last year and got a pair of turntables and Phase.
What if you did calibrstion but the big dots still move forward?
Then you might need to get Rane involved. I ended up selling mine and going back to turntables.
This doesn't appear to work on the new MKII models.
Yeah, I've been hearing that myself.
hold pitch 8% and 16% only down....than the same movement... when you're back in the middle position push all 3 pitch knobs ;)
Love the lab! Great vid @logisticalstyles
I need this same video for rane twelve mkii or is it the same
According to the RaneDJ forum the process is the same. I haven't had to do this to my MKII
I have tried this with my MKII’s without any luck.
hold pitch 8% and 16% only down....than the same movement... when you're back in the middle position push all 3 pitch knobs ;)
I my rane 12 mk2 winds up when I press play but only in serato. Doesn't do that in virtual dj. What does that mean?
That’s just they different way the two programs react. Technically the motor always has a drag when the start button is pressed regardless of what program is used. All turntables are like that. Virtual DJ starts the music instantly and lets the turntable catch up without affecting the sound. Serato stays true to what speed the platter is actually moving at. That’s just the difference between using controllers with platters that rotate and the one that don’t. DJs like myself that started on real turntables appreciate those little imperfections.
Thanks brother I appreciate that information. I started to get irritated and take it back because I thought something was wrong with the rane mk2. I started on controllers and thats what I was expecting it to do was kick right in.
thanks!
Its not working for me. What should I do?
Hello,
Is it possible to connect the Rane Twelve to the new XDJ-XZ controller?
I searched a lot for the reponce but I can't find it on the internet.
thanks in advance
Have you tried Phase? I can't decide between the Twelves or Phase....any advice? Thanks
Steve Bennett I never got a chance to try Phase. I wish I could compare them.
@@logisticalstyles No problem....thanks anyway
Thanks for the tip! Where can I get that T-shirt though?! I need that lol.
It was a gift. I don't know where they got it from but I've seen someone else with one as well.
Can you please make a video about the little plastic rings? Thanks in advance.
LowLife Do you mean the spindle adapters?
logisticalstyles Yes, nobody has made a video on them yet!
I need to check my pitch on my Rane 12s.
Definitely do it.
I did it several time but the problem still there. Mine Rane 12 😢
I ended up selling mine because they would spin out of control even after Rane tried to fix it and sent me a new one.
@@logisticalstyles Waaaaw! Ok, I think better I bring it to Rane.
I'm having issue with a slow start on both of my 12s is there fix for the?
ross mr switch to high torque
Tried that, no change
ross mr change the brake speed in the Serato settings to all grey
So once you calibrate would you have to do it again?
I wouldn't think so but if the decks don't lock in at the 0 point then that's a sign that hey need to be calibrated.
does it work with 12 mk2?
이호종 from what I’ve been hearing, no it does not.
hold pitch 8% and 16% only down....than the same movement... when you're back in the middle position push all 3 pitch knobs ;)
Do they only work with Serato?
AloneInFiction They also work with VDJ.
I
Did the same but the problem is still there
How bad is the problem and is it the same exact problem? I recently came across a thread on the Serato forum where another issue with the pitch drifting has been acknowledged by a Serato rep. Interestingly enough there are pictures of an MKII version that Jazzy Jeff used during one of his live streams. Maybe they fixed that issues with the new model and hopefully they can apply the fix to our models.
Has there been a re calibration because they drifted out of zero again? Do all spinning plater controllers need re calibration? If so im stickn with my DDJ1000 rkbx and Roland 707M, Hercules DJ Cntrl Starlight
I didn’t have to re calibrate after the first time. I’m not sure if this is applicable to other controllers I only have done this with the Rane Rane Twelve. I got another brand new Twelve and didn’t have to do this.
Does this works for the new MKII models or they come perfectly calibrated?
My MKII has been working perfectly so far. I saw on the Rane forum where a Rane employee told someone that this method should also work with the MKII. I have one MKI and one MKII. They are both matching up as far as the pitch is concerned.
@@logisticalstyles I tried it, it didn't work for the MKII model