Merry Christmas to the whole team of YCR. Please don't stop providing us with these interesting videos showing your great craftmanship. Best regards from Germany
Hello 👋 Ryan I hope you had a wonderful Christmas 🎄 😊 holiday. I like the different outro its good to see you doing the editing..tell everyone I said hello 👋 and I hope you everyone have a great new years day and a very prosperous new year.
I don't believe in things without proper evidence, but this car has convinced me that that there are metal worms and they had their fill on this car! Great work, yet again.
Merry Christmas Ryan 😊 and a happy new year to you and the boys and girls at YCR ,, can't wait for the next episode 😊... Tim the Taffy living in the sunshine coast Australia 😊🇦🇺
It's typical of extremely rusty cars, the best bits of metal on the car are always holding onto the rusty bits that you can't quite reach with the cutting disc.
Merry Christmas to you all... just a stupid question because iv been on the sherry is there a percentage of the original car you have to keep before it comes a re shell of new metal 👍
Editing videos on Christmas Day that is dedication… that car was just holes held together with frilly bits of metals. But it looks like it might be structurally sound soon.
The Cosmo looks to me to have been beautifully designed and built. Do we know who designed it? It looks very Japanese to me (I’m a Japanese machine-ophile) so probably not by one of the Italian design studios who penned many of the vehicles we love in Europe (I include U.K.). Was it merely too thin sheet steel, poor quality steel, lack of anti corrosion protection, failures to create good drainage coupled with invisible water traps? For sure, the British winters, salting and gritting, the relentless dampness which is no exaggeration (& is responsible for the beauty of the green landscape but makes my wife miserable, with 4+ months of rarely properly drying out in shaded areas) that used to be absolute car killers when I was a kid in the 1960s. I think I forget how recent is the huge breakthrough that is anti corrosion technology and gives even moderately well cared for cars almost unlimited lives. 1990s, perhaps, even later? This Mazda is the most corroded vehicle that YCR has taken on, or it’s a shootout for the rotten wooden spoon with the disaster Datson! I am in awe of what Ryan can accomplish. I think his Dad said he’d been doing this for something like four years. If so, that’s amazing talent. Thank you for sharing your passion and skill. Happy new year.
After what you said yesterday on the live stream that its almost ready for Paint and painter Steve - I think you’re way behind on video editing and posting. With two main posts per week and all the projects in the pipeline - you need a full time video editor to catchup / keep up. Can Adam and Jenny manage it? And with Jenny there now I bet you guys need to be more careful keeping your toilet facilities clean - girls don’t like dirty Loos. Enjoy my donation to the Tea and Biscuits kitty yesterday - It was the biggest one for a while till someone bested me. Best wishes again from Derbyshire Steve over in Germany
Thanks for not talking on top of the video. The now and then pauses for explaining what you did and what you are going to do are just enough, its way better to enjoy the music while u r working.😊
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Watching this on Boxing day, beer in hand. Amazing work as always, thanks for this years uploads guys. Cheers
This is turning into more welds than sheet metal! It would be easier to 3d print the car 😂 Amazing work!
Thanks for the delicious videos and nice and relaxing tunes. I admire your honesty and attention to detail.
Merry Christmas to everyone at YCR. Thank you for all the content and enjoyment had this year.
Merry Christmas to all of you
Merry Christmas to the whole team of YCR. Please don't stop providing us with these interesting videos showing your great craftmanship. Best regards from Germany
Fantastic and thank you for the great videos this year to all involved.
Merry Christmas to everyone from Spain
Stylish jumper! 🤣 Happy Christmas and thanks for all your videos.
Merry Christmas to all of you too!
merry christmas to you and family have a fantastic new year
Merry Christmas and a happy New Year 👍🏻👍🏻👍🏻🇬🇧
Merry Christmas to all at YCR amazing content as always, thank you
Awh Ryan! You deserve to have Christmas day off!
Thank you fir all the entertainment this year and have a cracking New Yeae.
“For”
Merry Christmas, thanks for the videos.
Merry Christmas Ryan. All the very best !
Merry Christmas to you and the team a YCR . Thanks for ll the fantastic vids this year 👍
Merry Christmas, to Ryan and all the team at YCR , thanks for all the great content in 2024, 🎉
Your abilities are stellar 👍🏻 I’m really looking forward to seeing this antique up and running 😊
Very nice,still a long way to go,but you’re getting there.just keep on doing your thing.👍👍👍😎😎😎
Continue to delight us with your unique ideas. Your videos are a true inspiration.🐆🚤🏵
Merry Christmas and Happy New Year , thanks for the videos they are superb!
Love that you guys have a laser cleaner now. Must make cleaning up so much quicker throughout and cleaner
Merry Christmas buddy from Scotland
Thanks for work with this car. This car must live🙏🙏🙏🤝🤝🤝🤝🤝🤝
Hello 👋 Ryan I hope you had a wonderful Christmas 🎄 😊 holiday.
I like the different outro its good to see you doing the editing..tell everyone I said hello 👋 and I hope you everyone have a great new years day and a very prosperous new year.
I don't believe in things without proper evidence, but this car has convinced me that that there are metal worms and they had their fill on this car! Great work, yet again.
Oh yes, the tinworm is real!
Merry Xmas Ryan and all @ YCR
Ryan can't wait to uncover the misery... 😂😂😂😂... Greetings from South Africa!!
This is definitely a how to eat an elephant car. One mouthful at a time! Keep going and merry Christmas and a fruitful new year.
Merry chrimbo lads. Look forward to the next one.
Merry Christmas team.. thanks for all your videos in 2024 and look forward to more in 2025
Merry Christmas for yesterday Ryan 👍👍🎄🎄🇦🇺
Merry Christmas 🎄🎉 🎅
The amount of dedication! 👏🏻
That inner panel reveal was😱
Video quality and content is definitely better. Keep up the good work
Well done Ryan and Jenny Merry Christmas and Happy New Year
Wow! A Christmas Day treat! I wasn’t expecting that but it’s much appreciated. Merry Christmas YCR 😬👍🏻
Merry Christmas! Love the Pacman sweater. Lol
Merry Christmas and Happy New Year to you and all your employees and families as well!
Merry Christmas to you and the team buddy and all the best for the new year 👍🏻
Great stuff, thanks, merry Xmas and looking forward to 2025 rustorations ....
Another great video and xmas day treat 😄. Hope you managed to have a good Christmas after looking after your subscribers 👍
Dedication on Christmas Day. Great vid. Now get back to that Baileys! 😂
Merry Christmas to you and the whole shop! You guys do outstanding work! Keep up the good work!
Merry Christmas and Happy New Year YCR! Love your Mazda content and can’t wait to see the Cosmo completed! Still waiting on your first gen RX-7 😉
Merry Christmas !!
Nice sweater dude. Merry Christmas.
Merry Christmas to all at YCR.
Happy Christmas to you and the family and friends, great content as usual 👍
You fix that many holy cars you should be a reverend by now
Merry Christmas Ryan 😊 and a happy new year to you and the boys and girls at YCR ,, can't wait for the next episode 😊... Tim the Taffy living in the sunshine coast Australia 😊🇦🇺
Merry Christmas and a happy New Year
It's begging to look like... A mazda😅
Merry Christmas to u at Ucr. 🎄🥳
Best wishes.
It's like a patchwork quilt. Looking better though..
Love it!! I wonder if there will be anything original left by the end?
Merry Christmas and looking forward to seeing more videos in 2025
Mein Kater ist jetzt überzeugt, dass er ein RUclips-Star werden kann. Ich glaube, wir haben ein neues Projekt💝
Merry Christmas
Happy Christmas Ryan, and to all at YCR.
Loving the terrible Mazda
Merry crimbo 🎉
i stiil think the cosmo should be named patches. Have a merry christmas to you and your family
It's typical of extremely rusty cars, the best bits of metal on the car are always holding onto the rusty bits that you can't quite reach with the cutting disc.
Happy Christmas, you would need to take time off, Christmas is a great excuse to do nothing for a few day's.🎄🎄🎄
Merry Christmas to you all... just a stupid question because iv been on the sherry is there a percentage of the original car you have to keep before it comes a re shell of new metal 👍
😍😍😍
getting close
Is that Mazada going to have 60% replacement metal.
Editing videos on Christmas Day that is dedication… that car was just holes held together with frilly bits of metals. But it looks like it might be structurally sound soon.
When marking out sheet steel for the Mazda and Disaster Datsun, do you have to measure in mm? 😂
👌👍👍👍👋
The Cosmo looks to me to have been beautifully designed and built. Do we know who designed it? It looks very Japanese to me (I’m a Japanese machine-ophile) so probably not by one of the Italian design studios who penned many of the vehicles we love in Europe (I include U.K.).
Was it merely too thin sheet steel, poor quality steel, lack of anti corrosion protection, failures to create good drainage coupled with invisible water traps?
For sure, the British winters, salting and gritting, the relentless dampness which is no exaggeration (& is responsible for the beauty of the green landscape but makes my wife miserable, with 4+ months of rarely properly drying out in shaded areas) that used to be absolute car killers when I was a kid in the 1960s.
I think I forget how recent is the huge breakthrough that is anti corrosion technology and gives even moderately well cared for cars almost unlimited lives. 1990s, perhaps, even later?
This Mazda is the most corroded vehicle that YCR has taken on, or it’s a shootout for the rotten wooden spoon with the disaster Datson!
I am in awe of what Ryan can accomplish. I think his Dad said he’d been doing this for something like four years. If so, that’s amazing talent. Thank you for sharing your passion and skill. Happy new year.
Hi, just to add will editing the videos can you add a black spot will welding to protect our eyes, thanks
I think you should make wall art out of the bits you have replaced, just to show clients the level of skill that you posses
After what you said yesterday on the live stream that its almost ready for Paint and painter Steve - I think you’re way behind on video editing and posting. With two main posts per week and all the projects in the pipeline - you need a full time video editor to catchup / keep up. Can Adam and Jenny manage it? And with Jenny there now I bet you guys need to be more careful keeping your toilet facilities clean - girls don’t like dirty Loos. Enjoy my donation to the Tea and Biscuits kitty yesterday - It was the biggest one for a while till someone bested me. Best wishes again from Derbyshire Steve over in Germany
I bet you that Jenny had Ryan put the safety guard on the cut-off wheel tool too. Good to see that.
Thanks for not talking on top of the video. The now and then pauses for explaining what you did and what you are going to do are just enough, its way better to enjoy the music while u r working.😊
A very religious restoration.
Hi Yorkshire
I saw that your thumbnails could be better let me know, if you need a thumbnail designer
Merry Christmas!!
Happy Christmas to all at YCR
Happy Christmas
Merry Christmas