Trying Resiners Airless bubble removal machine
HTML-код
- Опубликовано: 5 окт 2024
- Thanks for watching my resin video. Be sure to subscribe and go check out a few more of my other videos. Those are great ways to support my channel.
When working with resin always work in a well ventilated area. Wear a respirator with organic vapor filters and wear nitrile gloves.
#resin #resinart #resincrafts
******************************************
*******************************************
Link to the Airless machine from resiners
Discount code NAPTIME
resiners.com/p...
*************************************
Link to the resiners website
Discount code NAPTIME
resiners.com/?...
As an affiliate I earn a small commission from qualifying purchases at no additional cost to you
*************************************************
Check out my etsy shop to purchase my artwork and glitter here's the link. www.etsy.com/s...
Did you find this video helpful? Want to leave me a tip or buy me a coffee? Here's the link to my PayPal
paypal.me/Napt...
*************************************************
************************************************
The resin I used today was @LETSRESIN epoxy. Here's the link
amzn.to/3IaTG5c
As an affiliate of LET'S RESIN I earn a small commission at no additional cost to you.
Let me know if you have any questions down in the comments, I would love to hear from you. Safety Disclaimer Before you create ALWAYS read all of the instructions and safety labels on all of the products you are going to use. I am no expert I am just sharing the way I like to create art and any tips/tricks I have learned along the way. ALWAYS wear proper safety gear when working with resin and paint. I ALWAYS work in a well ventilated area. Also always wear nitrile gloves and a full face respirator when I work with resin. Remember to have fun and be safe when you are creating. Always keep a fire extinguisher nearby your Creation station. Thank you :) ***************************************************** Coupon codes good for any purchase.
The epoxy resin store- NAPTIME20
Ksresin- NAPTIME
Dryer days art studio- NAPTIME
Laura's art corner on Facebook- TISH10% GenCrafts- NAPTIME10
WynnModernArt- WynnWithNaptime20
Le'Rez Expressions Website- TISH20
TotalBoat website- NaptimeTB valid through 12/31/21
Artworks Resin Canada- naptime10
As an affiliate of the epoxy resin store, dryer days art studio, ksresin, GenCrafts, LET'S RESIN and Amazon I earn a small commission at no additional cost to you. I greatly appreciate your support and use of my affiliate links and codes. All commissions earned help me purchase more art supplies so I can keep making videos for my RUclips channel 
Хобби
![OsamaSon - ik what you did last summer [Official Music Video]](http://i.ytimg.com/vi/4DIQDnu3mr4/mqdefault.jpg)
I saw a good tip is putting a silicone bowl under your cup and will protect the machine if it overflows.
That's a great idea. I'll have to try that next time when I mix more. Thank you ❤️
@@naptimecreations Daniel Cooper found one that fits perfectly that he has linked on his video in case you want an easy find on it. Lol. Thanks for doing the unboxing! I’ve seen several people test it, but nobody has done an actual unboxing that I have seen.
You could actually degass a bunch more resin if you use a wider vessel. also, putting a piece of parchment paper of silicone mat on the bottom is a good idea.
Thanks for watching,
I know, the wider cups I have are opaque so I couldn't use them for this video because you wouldn't be able to see the bubbles rising in the cup.
I got mine delivered about 30 minutes ago but of course I’m working from home so can’t play with it until after work but I’m excited!
Awesome, it works really well. Just make sure to hit start after you press A.I.
I had to hit start a few times before the numbers on the left started going up.
You are going to love it.
This is exactly how I mix my resin too.
That's great, it's really a fail proof method 😊🌹 It takes a little longer but it makes sure its completely mixed
Very cool machine. I hope you feel better soon 🙏💕
Thanks my friend, I feel a lot better but I'm just so stuffy. My husband says it's allergies but I was actually sick. Lol.
He always says it's allergies. I don't have allergies I felt awful for 3 days. Now I feel good it's just the lingering congestion 😅
@@naptimecreations my hubby always says that too, but that's because he never gets sick. He still doesn't understand that he's the carrier monkey 🐒🤣😂
I’ve had mine for about a week and have tested it many times now, i just doesn’t work in such small amounts of resin so I have gone up to 7 oz of mixed resin and i don’t unplug the pressure plug and just restart the machine again and run it for an additional 2 minutes and it seems to work just fine. I have also put my molds themselves instead of the resin cup in which work better for the crystal molds.
Awesome, I love mine already and have only used it 1 time. I was wondering if molds would work inside. Mine bubbled almost out of the cup so I couldn't do more than 4oz in these cups that come with the machine.
I'll have to get some other larger cups that fit inside. The cups I usually use are too big.
Thanks for the tips and thanks for watching 💟
@@naptimecreations I wonder if it’s a different type of resin, I’m using lets resin bubble free and I just tried a new kind nicpro bubble free and I used them both at 6 oz (7 on let’s resin)with no bubble over, maybe my machine doesn’t work as well, I saw everyone else’s bubbles much more than mine also maybe climate too, Im in SE Alaska. I have to warm my resin in hot water before every use I guess that could be it too. Hmmm now I wonder
Hi Tish I need to get this machine it looks so good 😍, thanks for sharing , hope your feeling better hugs ❤❤❤ xxx
Thanks my friend ❤️ this machine works amazing, you will love it. I am feeling much better already thankfully 😊 thanks for watching
How do you get cord for it on the site it's it dont come with a cord I guess it came with tishes cuz they sent her for review
So you mixed the first time for three minutes, then you switched cups, and said it takes you 2 to 3 minutes to get all the resin out of the 1st cup, then mixed the 2nd cup for another three minutes. So let’s say that’s eight minutes altogether then you put it in the machine for nine minutes, so 16 minutes?
Your resin must have a very long working time, because if you then wanted to separate that and mix in colors or glitter, that’s going to take at least another 5-10 minutes. Plus you need time for whatever you are doing with the resin, pouring into a mold, or making a design on a substrate. Then, checking for errors, for dust or hair, touching up the sides or running heat over the project. Id think ts going to take much longer than most resin working time. (That I know of. If you can recommend a resin with a 45+ minute working time I’d love to know because I am slow :-)
That being said, it would be interesting to see you mix the resin, the way you normally do with the two cut method, and then just let your resin sit for five minutes. I wonder if you would have the same results as you did after nine minutes in a $150 machine.
Interesting that yours is the first review I’ve seen using the machine with one to one resin that has been positive. Or maybe you have to give a positive review if it’s a paid promotion?
Yes, I use the LET'S RESIN epoxy it has about a 40 min working time and off camera I didn't press start after I hit A.I.
So my resin was actually in the machine for 9 minutes before what you saw in this video.
After the first 9 minute cycle nothing happened because I didn't press start and then I tried again and pressed start after A.I and then it worked fine. Which is what you saw on camera. So in reality my resin had been in the machine for 18 mins. I was still able to work with it after that.
Try the LET'S RESIN epoxy If you need a longer working time resin.
I only show products I reccomend on my channel. I would never show something I didn't genuinely like.
And I'm not being paid for this video. They sent me the machine to try and give an honest review.
You can see in this video from @daniel Cooper he used 1 to 1 ratio epoxy and the machine worked great for him too.
ruclips.net/video/Vu29nJBIp3k/видео.html
So cool....I was wondering how much work time would be left too. I seem to always run out of time when doing lots of molds with different inclusions
that is great! they need it bigger for larger pours!!! heheheh ❤❤🌹
Thanks Rose, that's what I'm hoping for on the next version 😍 thanks for watching.
Great video and your voice sounded great lol. What is the largest volume you can put in there and how have you found it for using large moulds?
Thank you so much and thanks for watching.
The amount you can add depends on the size of your cup.
My friend took a 32oz paint pail and cut it down in length a bit so it would fit inside the machine and it worked great for a large amount of resin.
If you have a tall wide cup. Similar to the size of the machine you can put a lot inside.
I only had these smaller 8oz skinny tall cups so I couldn't Try too much when I made this video.
Do you have Instagram? You can see my friends video here. She put a lot in the machine. Here's the link to her video.
instagram.com/reel/Cyi2Ikhu8om/?igsh=ajFlMXJwNzF3bW1v
@@naptimecreations that's great and thanks for the reply.
Yes I have Instagram and I will check out the link.
Great video, thanks!
Thank you ❤️ and thanks for watching
Hi Trish. Thank you for the video. Vert informative.
Did your resin get hotter while in the process of de-gassing?
Thank you 😊 no it didn't I use the LET'S RESIN epoxy. Thanks for watching ✨️✨️✨️
What can be use other than the spatula and the sticks
Hi, do you think it would work on plastisol ?
I'm not sure. I've never heard of that product. Is it ink?
Does anyone know if you mix the colors before the machine or after?
Either way works
I was gonna order one but it says it dont come with a cord where to find a cord for it
It comes with the cord.
Link to the Airless machine from resiners
Discount code NAPTIME
resiners.com/products/resiners-airless-bubble-removal-machine?variant=41637470797871