They make an option that comes with battery and case. If yours don’t come with get a NPF-970 it’s the bigger one so it’ll last longer. You can also power with usbc without a battery installed on a 5V charge
@@WilliamNeviuscheers mate. I’ve received and the lead it’s came with doesn’t fit my camera so ordered a separate one that does along with the battery. Connected everything up but it just sits on blue screen and nothing shows on the monitor. I’ve played around with the settings on my camera and looked up online what might be wrong but nothing seems to be working. Any ideas??
I agree, at this point monitors should be upgraded to control some camera settings at least a touch to focus and touch for playback. I’m sure with newer cameras having usbc it’s possible. Hopefully we get these features integrated in the next few years.
Hey, in direct comparison would you choose the viltrox or the feelworld? Im testing the viltrox right now but im not sure because where im living there basiclly the same price. My Viltrox also has the option to put the fan noise completly out, maybe thats a newer fimrware update.
I’ve shot with the feelworld at an outdoor wedding a few weeks back. We shot for about 3 hours in 98 degree weather and I almost melted but the monitor never overheated or cut out. Not use how they do it but no over heating issues even in direct sunlight
I mentioned this in the video…The feelworld monitor has higher brightness, no fan noise, luts can be loaded into the monitor and has a battery dummy and battery life is way better. Viltrox has better sunhood/screen protector. It’s @ 11:59
Does it make any noise when it’s on? I saw a review that said it makes a sound and will ruin any audio you record if you use a shotgun mic on your setup… Could you confirm? Thank you!! Great review :)
I noticed high pitch sound that comes from the back of the monitor. Nothing major, you can’t hear it unless if you are in a very quiet room and you put your ear on the back. I myself was wondering if that is normal.
You can actually plug in usbc with the battery not connected and power this so great if you had a V mount battery or you can plug the usbc into the battery port while connected to the monitor and the monitors battery will charge up while in use. The only downside is the indicator is on the inside so you can’t tell that is charging. I tested this with a different battery at similar to this one that has an indicator on the outside and it charges while connected. Hope that helps
Hey no this monitor does not have a feature like that to indicate recording. You would need to view this on the cameras monitor not this external monitor. I know my camera has a start and stop record sound.
Thanks bro. Yeah that make this is a 2 option solution 1 with the case and battery and another option without the case and battery. It’s a 10 dollar difference. At least they had both options when I made this video. The battery and carrying am case was definitely worth it
@@WilliamNevius Damn. I didn’t see that. Ah well. Just dropped another $70 on batteries after reading your comment. Sucks, but at least I get the monitor.
I am noticing when I get too close to the back of the monitor, I hear some high pitch sound, I am wondering if that is normal for this type of monitors to produce? Anyone noticed the same thing?
Yes I noticed that too. It doesn’t get picked up on in the recordings audio. To me it sounds like all electronics that uses 5v power or above. I’ll take that over a fan noise any day. Like you said you have to really be looking for it to hear it lol
Yes, you can. You just need to switch the output settings of the HDMI to 1080 FPS 60 frames per second then you can view the footage and film 4K 60 FPS if needed.
Have you tried factory resetting the monitor? Should be in the user system tab. Try that first if not that then maybe you changed the hdmi settings on your camera?
I think this is another gadget that makes filming harder especially when you are using a DJI gimbal and have to move around or even run. It would be fine with static shots but shots with lots of camera moves it would be a nightmare for the camera man. Plus the LUTs are not affecting the recorded footage so what you see is NOT what you get plus the battery makes it even heavier.
I understand your point of view however, these monitors come in handy for multiple reasons. The regular camera monitor is super small. Sometimes you can’t see all the details. The bigger monitor allows you to make sure the framing is correct. It’s been times where I left a dirty cup in the background, not noticing it through the camera, but noticed it through the monitor for an example. You also have additional features like focus assist, anamorphic crop, markers scopes, vectors etc.. (cameras don’t have these features) that helps you expose the shot better when shooting in S-log Vlog C log, etc. having the luts on the monitor helps you expose the shot better while using a lut. For example, shooting in S log 2 you need to over expose the shot, but having the monitor with the lut on it, gives you a better representation of what the image will look like. The monitor brightness is also a plus for shooting outside in the middle of the day. Most screens on cameras are not as bright as the monitor can get almost double brightness ensuring you can see your image you’re shooting. For a professional who has one time to get it right the monitor does come in handy to put you in a better position of getting all of the shots you need perfectly the first time.
Dang it’s such a great value with the 970. I know for the US store they have 2 options. Did you get the carry case? You can always get the npf-970 battery separately. It’s last over 5 hours.
![Quando Rondo - Grow Up [Official Music Video]](http://i.ytimg.com/vi/8zFnCg3BO4Q/mqdefault.jpg)
THANK YOU SO MUCH FOR EXPLAINING EVERYTHING IN DEPTH, LOVE FROM INDIA ❤
No problem. Love that all my hard work on the video is helping people with answers about this product. Even people across the globe 🌍 🖤🙌🏽 🇮🇳
Thats a nice clean product and all those functions for that price is good deal. Great video bro
Word bro especially its brightness! Crazy right. Thanks homie 🙏🏽🙏🏽
I’m assuming that it doesn’t come with a battery - can it be powered without?? Also, what battery is best to use and where to buy from??
They make an option that comes with battery and case. If yours don’t come with get a NPF-970 it’s the bigger one so it’ll last longer. You can also power with usbc without a battery installed on a 5V charge
@@WilliamNeviuscheers mate. I’ve received and the lead it’s came with doesn’t fit my camera so ordered a separate one that does along with the battery. Connected everything up but it just sits on blue screen and nothing shows on the monitor. I’ve played around with the settings on my camera and looked up online what might be wrong but nothing seems to be working. Any ideas??
I have the 4k bright and its calibrated...would love a touch focus integrated into these monitors eventually
I agree, at this point monitors should be upgraded to control some camera settings at least a touch to focus and touch for playback. I’m sure with newer cameras having usbc it’s possible. Hopefully we get these features integrated in the next few years.
Hey, in direct comparison would you choose the viltrox or the feelworld? Im testing the viltrox right now but im not sure because where im living there basiclly the same price. My Viltrox also has the option to put the fan noise completly out, maybe thats a newer fimrware update.
saw that already answerend in the comments, but the fan noise aside is the feelworld overheating then without fan?
I’ve shot with the feelworld at an outdoor wedding a few weeks back. We shot for about 3 hours in 98 degree weather and I almost melted but the monitor never overheated or cut out. Not use how they do it but no over heating issues even in direct sunlight
@@WilliamNevius Thanks for the Answer , and may the force be with you 😃
@felixxyzz 🤣🤣😂😂🤪
I was looking at viltrox 550 pro, , which one would you choose from the two options? According to your experience.
I mentioned this in the video…The feelworld monitor has higher brightness, no fan noise, luts can be loaded into the monitor and has a battery dummy and battery life is way better.
Viltrox has better sunhood/screen protector. It’s @ 11:59
@@WilliamNevius thanks, I saw those comments, I just wanted to confirm your opinion. Thanks, I will go for the feelworld, and thanks for the content.
Oh for sure no doubt bro very welcome. But Yes feelworld is the better buy RN!
Does it make any noise when it’s on? I saw a review that said it makes a sound and will ruin any audio you record if you use a shotgun mic on your setup… Could you confirm? Thank you!! Great review :)
Zero noise. There is no fan in it either. A major reason why I love this monitor. So your audio mounted would have nothing to pick up 😄thank you 🙏🏽
I noticed high pitch sound that comes from the back of the monitor. Nothing major, you can’t hear it unless if you are in a very quiet room and you put your ear on the back. I myself was wondering if that is normal.
Quick question please. How can i charge the battery while still attached to the monitor? hope you know this. thank you
You can actually plug in usbc with the battery not connected and power this so great if you had a V mount battery or you can plug the usbc into the battery port while connected to the monitor and the monitors battery will charge up while in use. The only downside is the indicator is on the inside so you can’t tell that is charging. I tested this with a different battery at similar to this one that has an indicator on the outside and it charges while connected. Hope that helps
I WANT 1!!!!
🤣😂😁 right !!! So nice
Looking good!
Yes sir! It’s actually super nice! The finger prints gets on my nerves but that’s every touchscreen monitor ever made 😂😂🤣
does it supports loop output?
Yes it does. 4k30 loop out
there is red bord light aorund sceen when you start recod in camera? so you know its recoding on camera?
Hey no this monitor does not have a feature like that to indicate recording. You would need to view this on the cameras monitor not this external monitor.
I know my camera has a start and stop record sound.
Good review. Doesn’t come with a battery, though. Maybe you ordered a bundle?
Thanks bro. Yeah that make this is a 2 option solution 1 with the case and battery and another option without the case and battery. It’s a 10 dollar difference. At least they had both options when I made this video. The battery and carrying am case was definitely worth it
@@WilliamNevius Damn. I didn’t see that. Ah well. Just dropped another $70 on batteries after reading your comment. Sucks, but at least I get the monitor.
@0xggbrnr yeah for sure with the battery it was 170. How much did you cost just a monitor for?
@@WilliamNevius $160 just for the monitor. It’s easy to miss the options.
@@0xggbrnr dang!!! I see. Well at least you’re good to go. You can also power it usbc without the battery even installed in case you ever needed to
I am noticing when I get too close to the back of the monitor, I hear some high pitch sound, I am wondering if that is normal for this type of monitors to produce? Anyone noticed the same thing?
Yes I noticed that too. It doesn’t get picked up on in the recordings audio. To me it sounds like all electronics that uses 5v power or above. I’ll take that over a fan noise any day. Like you said you have to really be looking for it to hear it lol
Can you film in 60 fps !?
Yes, you can. You just need to switch the output settings of the HDMI to 1080 FPS 60 frames per second then you can view the footage and film 4K 60 FPS if needed.
@@WilliamNevius is there any monitors that out put at 4K !?
This one outputs 4K 30 frames per second. Are you asking for a 4K 60 frames per second? There are some, but the cost is much more expensive
When I hit record, my monitor turn green for about 5 seconds. How do I fix this? I didn’t always do this.
Have you tried factory resetting the monitor? Should be in the user system tab. Try that first if not that then maybe you changed the hdmi settings on your camera?
@@WilliamNevius let me take a look, thanks
I think this is another gadget that makes filming harder especially when you are using a DJI gimbal and have to move around or even run. It would be fine with static shots but shots with lots of camera moves it would be a nightmare for the camera man. Plus the LUTs are not affecting the recorded footage so what you see is NOT what you get plus the battery makes it even heavier.
I understand your point of view however, these monitors come in handy for multiple reasons. The regular camera monitor is super small. Sometimes you can’t see all the details. The bigger monitor allows you to make sure the framing is correct. It’s been times where I left a dirty cup in the background, not noticing it through the camera, but noticed it through the monitor for an example.
You also have additional features like focus assist, anamorphic crop, markers scopes, vectors etc.. (cameras don’t have these features) that helps you expose the shot better when shooting in S-log Vlog C log, etc. having the luts on the monitor helps you expose the shot better while using a lut. For example, shooting in S log 2 you need to over expose the shot, but having the monitor with the lut on it, gives you a better representation of what the image will look like.
The monitor brightness is also a plus for shooting outside in the middle of the day. Most screens on cameras are not as bright as the monitor can get almost double brightness ensuring you can see your image you’re shooting.
For a professional who has one time to get it right the monitor does come in handy to put you in a better position of getting all of the shots you need perfectly the first time.
But you can stiil play the video from camera and see it on the monitor
Yes you can play the video back and view on the monitor
🔥🔥🔥🔥🔥
😘😘🥰🥰
Mine did not come with that battery , smallest one only
Dang it’s such a great value with the 970. I know for the US store they have 2 options. Did you get the carry case?
You can always get the npf-970 battery separately. It’s last over 5 hours.
Came with the case .
Monitor and case are labelled as Andycine .
@nacantremember are you sure it’s the F5 Pro X feelworld monitor? Did you get it from amazon or direct website?
@@WilliamNevius definate F5 pro x . I've seen other reviews list that a couple of hdmi cables come with it but I only received 1 (micro to hdmi )
@@nacantremember thats nuts was it $159.99?