Это видео недоступно.
Сожалеем об этом.
Home security using PIR sensor and old keypad Mobile || home automation gsm module
HTML-код
- Опубликовано: 23 янв 2018
- I'm using my old nokia mobile with PIR via relay module.
one channel relay is enough for this project.
parts needed:
old mobile(keypad type)
PIR sensor: amzn.to/31pv2ar
single channel Relay: amzn.to/3ikUvbX
music
NCS music : • Egzod - Mirage (feat. ...
فكرة جيدة
This is awesome man
Useful video
Great!
I am going make this
Vary good and thanks.
Very lateral thinking, appreciate it. There are two things,, u could have showed the dialing clearly upon PIR signal, it wud have been thrilling. I suggest an idea, we can use a transistor instead of relay taking common gnd from the phone.
+Dilipkumar Entoor thank you for your valuable suggestion. It may helps in my future concepts.
Ap ny achi bat ki sr.
Ma lana ha call me 9914965473
sir e project banayahu sir super sir thank sir
thank you.
it has one drawback too, for example if you receive a company msg on screen it will not be able to dial automatically. i have made its improved form with 2 channel relays
Mobile soldering wires connect to NO terminal and NC?
👍😀
Sir. Cell m agr call ya msg aa jaye tu cell working nh krta. Mtlb notification read krn hota wo screen pr aa jata notifications msg ya call ka. Uska kia hal hai. Kyo jb tk screen pr notifications hoga tb tk speed Dail work nh kry ga
thanks
How to operate it for second time as speed dialing number remains on the screen we have to go to home screen to operate it for second time. Is it possible
Ek baar phone lagne ke bad dusri baar kaise phone lagae. kyunki phone ko dusri baar lagane ke liye phone ko Ek baar totally cut karna padta hai. Home screen pe jaa ke hi fast dialing kam karta hai. Please bataiye
thanks for u video but u use unmber 5 to add2wire ?
you can use any number to dail
@@b.techie9467 yes but not change eny things in call or phone ?
Relay kon si hy
Thanks
sir Ye jo pir sensor ke sat jo kit hai uska name kiya hai and aap bol ke bataw yese samjh me nahi aaya bacgrond ka awaj ban Karo dhanwad
sir , tell me the sensor work in nightmod(dark) ?
+Dipak borah yes, it works.
सर जी प्रणाम मुझे एैसा PIR sensor चाहिए जिसमे जब तक आदमी sensor के रेन्ज मे है तब तक उसके output से वोल्टेज निकलता रहे और आदमी जब sensor के रेन्ज से बाहर हो जाये तो output से सप्लाई आना बन्द हो जाये अगर आदमी दुबारा फिर sensor के रेन्ज मे जाये तो फिर output से सप्लाई आना चालू हो जाये इसी तरह होते रहना चाहिए जब आदमी जाये और बाहर आये एक बात और रेन्ज सेटिंग भी रहे जिससे कम ज्यादा किया जा सके कृपया जल्दी जवाब दे धन्यवाद सर जी
sir Ye milega kaha pe market ME pata kiya hu to Mila hi nahi
NO NEED FOR THE RELAY.JUST CONNECT TO MOBILE DIRECT.
+Ese Callum thank you for your suggestion, but how it works ?
The output of the pir module will cause the mobile to activate.
@@b.techie9467 i need details of this relay .
Hi good day, I am wondering if it's possible to make a proximity sensor with a "unique trigger" (that can be attached to let's say a cellphone case or camera case). So that if a thief would try to leave my store with an item with that unique trigger attached to it, the device or alarm (which is placed by the door) would trigger an alarm. Is this possible??
i think it is difficult to fix the trigger for each item. I'm thinking about that, if any idea then i will post that soon.. tq.
and sorry for my English.
Thanks for the quick reply, and don't worry about your English, i am not a native speaker myself so my English is also not that good.
wow its great , please i need it can you send me document on this project
bro kindly give us a circuit diagram
Can I use 4batteries of 1.2v(1.2vX4)=4.8 for 5v relay
sure. for 5v relay 4.8v easily works, there is no problem with that.
Not wrong likin speed dialing setting karna hoga
+Chiranjibi Das ok
Brother my sensor output comes Continusely without any motion..... What can i do for this solution??
That may be defective of your sensor, Once try with new sensor.
Dear Sir, i put the mobile in other house, when any motion there the screen of mobile just turn on without calling, but it calls in second time only when the screen is on, how i fix this, i mean how let the mobile call in once while the screen is turn off? thanks.
Sir nehi ho raha hain ... Circuit diagram pls send karo .. 12 volt relay ka istemal kar raha hoon mein ..but kam nehi kar raha hain pir sensor ko alag se 3.7 volt de raha hoon ... ( mobile battery se ).. Lekin pir sensor kaam nehi kar raha hain .
use 5v relay.
Sir, I need circuit diagram for project
Dharamsai14@gmail.com
Can we use arduino
yes you can.
i made a 220vac siren that will activate by motion sensor but the problem is every time when i switch on the siren will alarm for 12 seconds then it turn off, anybody know how to eliminate that alarm every time i switch on the supply?
change ringtone associated to speed dial number to be monotone by recording it. i think it will solve pb.
Totie Gillego pir will calibrate automatically when it connected to power supply, so for that first 10 to 20 seconds it will turn on and off.
So PIR is not adviceable to use as a switch on siren as a burglar alarm. What about if i put surge protector, do you think it will eliminate that unwanted current running on the siren?
there is no other way to eliminate that ?
you mean change the 220vac siren ?
Can you give me this ready circuit without phone
try yourself, its very easy. if any doubt i will help.
@@b.techie9467 do I need resistor if I will connect the wires of the phone to 5vdc relay and then relay to arduino uno ?
Can I use 9v battery for it
check the input voltage range of your relay and PIR, and use 12v relay.
b. techie my relay is 5v
if your relay working voltage is 5v then don't use 12v, i will send the circuit diagram to ur mail, wait.
It's working or not
yes it's working.
Yes ya no
Please speak
Project cast kitna hai?
if u have old mobile, costs not more than 200.
Kon si relay use hogi isme
+Dinesh chauhan use 1-channel relay.
Phone ke jariye tubel Kaise Chalaye Jaye uske upar video nikale
Band kamreme continue bajata rahata hai
Any mobile use
use any keypad mobile, no problem.
05:30 NO terminal in the sense of Normally Open.
b. techie मुझे कॉल करो भाई मुझे लेना है आपसे यह9829731148
Bhai screen touch phone hua tohhh
i have another project for screen touch mobiles, will upload soon.
Ok tq brother but jaldi karna na please bro
Wrong
Bole ke btao y mujhe please
Keypad botton connectioN wrong
+Chiranjibi Das have you tried this, it working perfectly.
Why are using the relay for this simple project non-sense
+Ammar Chauhan tq for your feedback, comment your idea if you feel that using of relay doesn't makes any sense.
use an Arduino Analogue pin and connect the arduino ground to mobile phone button terminal
it will work fine
tq for ur suggestion. I want to do this without any microcontroller, so only 3 components pir, relay and mobile.
i appreciate buddy :)
Ye security system kese bana sakte Hai
ruclips.net/video/5QCSmL9ylKQ/видео.html