Just FYI the U7 Pro have a built in fan. That big slot to the left of the network port is the exhaust. You can see it around the 02:01 mark in the video.
@@WillieHowe well yes, most devices won't support mlo so 4x4 will remain the better option for years to come I hope they stop at 8 for a while. somehow I managed to skip 6 and 6e entirely personal device wise
@@WillieHowe MIMO is to have multiple streams to multiple devices simultaneously. 2x2 can only do 2x2 to a single device while 4x4 can do 2x2 streams to 2 devices simultaneously.
We have a lot of C-Stores and we still use WiFi 5 in them and dont plan on moving them to 6 any time soon, for the stuff we run in them we dont need super high speed yet.
The only advantage to having 4x4 is more antennas to serve more clients. Outside an enterprise environment you wont even notice this limitation. It would take over 100 clients to even notice. Most devices are 2x2 mimo configuration anyway. Even the s24 that’s WiFi 7 capable.
@@98ws6m6cvertthey stuck a laptop wifi chip in an AP. My 2019 MacBook pro has 3x3 wifi 5 interface that outperforms 2x2 wifi6 in actual tests. Also, there are other important advantages to more radio chains. You won't need more than a handful of clients to see a difference.
That part you didn't know the name of is called a "doubler plate" and is used when mounting on drop ceiling tiles. Without it, the screws would pull out of the weak material the tiles are made of.
Wifi-7 / 802.11be standard has been approved stable, was initially expected to be approved May last year. Certification is "predicted" to be October or December 2024.
is there a portal to configure unifi7 pro? Your portal seems to be management portal for all your unifi devices. I just want to use the AP and connect it to my pfsense/opnsense firewall. My firewall is setup with the vlans and dhcp. I just want the AP to be Vlan aware according to the Vlans setup on the firewall.
That thing is a beast. With a single UAP AC Pro and 3 U6-Lite's in my place, I think I am good for a while before I need to upgrade. Don't really have 2.5Gbe anywhere outside my rack so helps keep me from just impulse buying one to tinker with. lol. 😇
They claim it has throughput up to 5.7Gb/s on Wi-Fi 7, but it only has a single 2.5Gbe port. They advertise 6 spatial streams, but it's actually 2x2 on each band. I think ill stick with my $200 Cisco 9130AXI from eBay 😉
Do you think these would be okay to run in an attic? Instead of mounting on the ceiling. I was thinking of mounting 2 of these in our house, roughly 35’ x 90’ footprint. Would an attic mount provide signal all the way in the basement?
@@WillieHowe single story house, correct (not including basement)… like 3200 sqft. Basement is another 800-900 sqft Someone else has said that it’s fine, just wondering what you thought. Obviously wouldn’t be peak performance.
Something that i never undestood is, can tou use Ubiquiti access point without having an ubiquiti setup? Can i just plug it in my modem and make it work?
Gigabit Type C PoE Splitter 5V 3A, IEEE 802.3af/at Standard, 10/100/1000Mbps Type C Power Over Ethernet Splitter with RJ45 Port and TYPEC Port(TYPEC0503G Black)
@@richmondstar4354 as long as it’s a 2.5 gig port or higher it will work. It will register on a 1 gig port from what I’ve tested, but of course you won’t get full utilization out of the AP.
I just bought 2 6E enterprise on a 2Gig symmetrical connection, I feel your pain. Then again, it’s pretty much a first world problem and I think I’ll just wait to upgrade later. lol
Just FYI the U7 Pro have a built in fan. That big slot to the left of the network port is the exhaust. You can see it around the 02:01 mark in the video.
I get similar speeds on my Wi-Fi 6E with the U6 Enterprise. I have a 2Gbps symmetrical connection.
Hopefully there be a U7- Enterprise with 4x4
Will you need it with MLO?
@@WillieHowe That is a good question.
@@WillieHowe well yes, most devices won't support mlo so 4x4 will remain the better option for years to come
I hope they stop at 8 for a while.
somehow I managed to skip 6 and 6e entirely personal device wise
@@WillieHowe MIMO is to have multiple streams to multiple devices simultaneously. 2x2 can only do 2x2 to a single device while 4x4 can do 2x2 streams to 2 devices simultaneously.
We have a lot of C-Stores and we still use WiFi 5 in them and dont plan on moving them to 6 any time soon, for the stuff we run in them we dont need super high speed yet.
Nice price, notice it is only 2x2, thanks for sharing
The only advantage to having 4x4 is more antennas to serve more clients. Outside an enterprise environment you wont even notice this limitation. It would take over 100 clients to even notice. Most devices are 2x2 mimo configuration anyway. Even the s24 that’s WiFi 7 capable.
@@98ws6m6cvertthey stuck a laptop wifi chip in an AP. My 2019 MacBook pro has 3x3 wifi 5 interface that outperforms 2x2 wifi6 in actual tests. Also, there are other important advantages to more radio chains. You won't need more than a handful of clients to see a difference.
That part you didn't know the name of is called a "doubler plate" and is used when mounting on drop ceiling tiles. Without it, the screws would pull out of the weak material the tiles are made of.
I just ordered one, can't wait! Any news of a U7 Enterprise with 5 Gig PoE?
You know as much as I do. Guess we just have to wait and watch!
@@WillieHowe
You included more information than necessary in the second sentence 🎉😊
Thank you.
You mean this isn’t u7-one-man-band or u7-utility-infielder?
Wifi-7 / 802.11be standard has been approved stable, was initially expected to be approved May last year. Certification is "predicted" to be October or December 2024.
I am undecided between U6Pro and U7Pro new home installation
as of 11 hours ago I started seeing the headlines of Wifi 7 is now Certified.
Maybe that happened at CES?
is there a portal to configure unifi7 pro? Your portal seems to be management portal for all your unifi devices. I just want to use the AP and connect it to my pfsense/opnsense firewall. My firewall is setup with the vlans and dhcp. I just want the AP to be Vlan aware according to the Vlans setup on the firewall.
That thing is a beast. With a single UAP AC Pro and 3 U6-Lite's in my place, I think I am good for a while before I need to upgrade. Don't really have 2.5Gbe anywhere outside my rack so helps keep me from just impulse buying one to tinker with. lol. 😇
Hello Willie, Does the U7-PRO have MLO yet? Also do I need a device that supports it?
Given that MLO isn’t yet available, isn’t this really the same as WiFi 6e? Would love to see the side by side speeds against the Enterprise AP.
Pretty much from my test with this AP. Good thing is literally no one is broadcasting on 6ghz. Super clean
They claim it has throughput up to 5.7Gb/s on Wi-Fi 7, but it only has a single 2.5Gbe port. They advertise 6 spatial streams, but it's actually 2x2 on each band. I think ill stick with my $200 Cisco 9130AXI from eBay 😉
Will the same SSID have to be used for each band for MLO to work?
Great question! I'm assuming yes.
When is U7 Enterprise coming out.
compare it to the U6-pro which is 4x4, while the U7-pro is only 2x2.
Do you think these would be okay to run in an attic? Instead of mounting on the ceiling. I was thinking of mounting 2 of these in our house, roughly 35’ x 90’ footprint. Would an attic mount provide signal all the way in the basement?
Possibly -- just a single story house?
@@WillieHowe single story house, correct (not including basement)… like 3200 sqft. Basement is another 800-900 sqft
Someone else has said that it’s fine, just wondering what you thought. Obviously wouldn’t be peak performance.
@@wackerman7259 You'll likely get connectivity but you're right, it won't be optimal.
Hi Willie, Could you give us your thoughts on the Edgeswitch lineup? I think those switches are awesome. Thanks!
I am a fan.
Something that i never undestood is, can tou use Ubiquiti access point without having an ubiquiti setup?
Can i just plug it in my modem and make it work?
You can use your smart phone to configure a single access point
@@WillieHowe thank you very much
dark mode?
If I'm looking to replace my Orbi Router + 2 wired satellites Unifi, I will need 3 Ubiquiti APs and a Dream Machine, correct?
No. Cloud gateway ultra with ap’s would be enough
Is there a 2.5Gb POE adapter available? Is there a 2.5Gb POE adapter period? Thanks!
The ap comes with a Poe adapter, but you still need a port that’s 2.5 gig and up. I used a 10gig sfp port until my 2.5 gig switch came in.
Gigabit Type C PoE Splitter 5V 3A, IEEE 802.3af/at Standard, 10/100/1000Mbps Type C Power Over Ethernet Splitter with RJ45 Port and TYPEC Port(TYPEC0503G Black)
Will any brand of switch (PoE +) will work on this u7?
@@richmondstar4354 as long as it’s a 2.5 gig port or higher it will work. It will register on a 1 gig port from what I’ve tested, but of course you won’t get full utilization out of the AP.
No Poe injector 😢
I dont trust UBNT's feature promises. They tend to disappoint me.
When you just upgraded to wifi6, wifi7 comes out 🤦🏻♂️
I just bought 2 6E enterprise on a 2Gig symmetrical connection, I feel your pain. Then again, it’s pretty much a first world problem and I think I’ll just wait to upgrade later. lol
Wifi 8 next year probably as well. If stuff does what you need, great. If it doesn’t, swap it.
@@Lofi-Life_6e is still fantastic because it supports the 6ghz band, I wouldn’t worry too much as that’s the main selling point for WiFi 7 as well imo
To bad they dont have bluetooth