I love the attention the old Dodge is getting! I think they’ll soon be a hot commodity! I’m definitely hanging on to my 99 Dakota! Keep up the awesome, detail oriented work!
That's some beautiful touches you've done to that RAM. Love the tan interior, love the wood dash, and the gauges are a chef's kiss. She's coming out real nice.
Man those are SICK! I just bought a 98 rcsb v6 5 speed I'm going to Magnum swap in a couple weeks. One day I'll hemi swap it but, I just want to put the V8 in it for now and enjoy it for a few years. Bought it for $1000 and drove it home. It has a dead cylinder but I couldn't pass it up knowing how easy it is to swap a 5.2/5.9 in. It's also pretty clean body, paint and interior wise. Love your clean ass builds John. You do us Mopar fellas proud 💪
Wheeew not just a simple plug and play setup. Lol dude didn’t even show any wiring or anything of it, it literally went from unboxing to ‘magically installed’. It appears that every gauge has to be manually hand wired. And thats a lot of work thats above most peoples skill level. Its bad enough some people hack wiring jobs. S lot of work for how ever much these cost, its a cool option but ill pass, my trucks mint with low milage. Programable milage’ lol that seems like a good way to ‘cheat’ your milage and make it appear lower milage than it really is. Always make sure to car-fax milage check everything! If it looks to good to be true it prolly is.
I wish you could have shown the actual wiring process. I know that's probably pretty involved for a video but I'm trying to figure out my Dodge Ram and I'm in over my head.
What should the transfluid be on a 5.9 mag with auto trans my 01 ram 1500 4wd its in the middle of the ok with the hash marks should add or is it supposed to be in the middle of the ok mark
Like the show. Have a idea, Looks like you have a lot going on already. Through your videos your already doing this giving tips/ training. Having been to the Oshkosh air show the have work shops set up for youth training to inspire kids to get into aviation. Companies sponsor these work shops Like Lincoln , Miller, and electronic companies for wiring , avionics etc. Here is a idea for you since you have tech savvy talent and if you had the time. Either at car shows or air shows set up a training course and being sponsored by say Painless wiring or Holley or some tech schools for automotive UTI, Lincoln Technical Institute, North American Trade Schools, Or a auto parts store like what Napa used to at high schools. As a work shop for students to inspire our youth. To a honest working trade Automotive technology. You inspiration to the common youth would be a plus. Maybe do some thing local at a local high school. Or Inspiration of a apprenticeship program? Just a idea that could spark a sponsor ship for you. Food for thought. Regards Mike Tennent
Use code "BoostedMotorsports" for 10% off
Click HERE for Gauges for your Vehicle
newvintageusallc.mybigcommerce.com/dodge-truck/
I love the attention the old Dodge is getting! I think they’ll soon be a hot commodity! I’m definitely hanging on to my 99 Dakota! Keep up the awesome, detail oriented work!
True, I'm thinking the same. Slowly but surely putting work into my 99 dak v8 2wd as well. This channel keeps me motivated haha
I just got a 2nd gen for 1500 and going to start fixing it before they go up in price
This build is killing it!! What an awesome build!! The quality of work you do is amazing!!
this color scheme is exactly what i’m going for in my indy, looks great 😍
That's some beautiful touches you've done to that RAM. Love the tan interior, love the wood dash, and the gauges are a chef's kiss. She's coming out real nice.
Man those are SICK! I just bought a 98 rcsb v6 5 speed I'm going to Magnum swap in a couple weeks. One day I'll hemi swap it but, I just want to put the V8 in it for now and enjoy it for a few years. Bought it for $1000 and drove it home. It has a dead cylinder but I couldn't pass it up knowing how easy it is to swap a 5.2/5.9 in. It's also pretty clean body, paint and interior wise. Love your clean ass builds John. You do us Mopar fellas proud 💪
We need this cluster for gen 3
It’s looking really great John!!!! I knew it would 😂!!!
Hey!!! where did you get the shifter kit? Looks really good.
This build is absolutely awesome man,wish I could buy it haha
WOW looks great..
Kind of pricey but really cool.
THUMBS UP !
Show the installation process. I just got mine, & have no idea what wire connects to from the dash harness. Thanks
That is awesome. I want one. Just checked the link and it says no products listed. Is it discontinued?
That dial shifter is throwing me off 😂
Yeah me too
Any more updates on this truck? I’m dying to know what ended up happening with it
How did you put in the pnrd,dial look great
Wheeew not just a simple plug and play setup. Lol dude didn’t even show any wiring or anything of it, it literally went from unboxing to ‘magically installed’. It appears that every gauge has to be manually hand wired. And thats a lot of work thats above most peoples skill level. Its bad enough some people hack wiring jobs. S lot of work for how ever much these cost, its a cool option but ill pass, my trucks mint with low milage. Programable milage’ lol that seems like a good way to ‘cheat’ your milage and make it appear lower milage than it really is. Always make sure to car-fax milage check everything! If it looks to good to be true it prolly is.
It would be nice if they made one for manual trucks
Those look great!
How did you install the dial gear shifter on your 2nd gen ram.
I wish you could have shown the actual wiring process.
I know that's probably pretty involved for a video but I'm trying to figure out my Dodge Ram and I'm in over my head.
We offer 1 on 1 consultations for anyone swapping that needs assistance. You can book it on ShopBoosted.com
Bro 🤙🏼 the theme of the interior flows very nicely it came out flawless love it man #BSTEDMTRSPRTS
how do the rest of the gauges work? do they run off the terminator unit?
I have a 97 sst original engine would it work with the original engine ?
What should the transfluid be on a 5.9 mag with auto trans my 01 ram 1500 4wd its in the middle of the ok with the hash marks should add or is it supposed to be in the middle of the ok mark
What motor and transmission you got in there?
Why didn't you wire the gages to the holley ecm
That's how he is pulling the info for speedo and tach. NVU is releasing a Holley interface in the near future
@throttleblip1 the same way Dakota digital does it gps
The NVU Speedo can run gps, but this one's running off the Holley Speedo output
Will u run it thru the 1/4?
Like the show. Have a idea, Looks like you have a lot going on already. Through your videos your already doing this giving tips/ training. Having been to the Oshkosh air show the have work shops set up for youth training to inspire kids to get into aviation. Companies sponsor these work shops Like Lincoln , Miller, and electronic companies for wiring , avionics etc.
Here is a idea for you since you have tech savvy talent and if you had the time. Either at car shows or air shows set up a training course and being sponsored by say Painless wiring or Holley or some tech schools for automotive UTI, Lincoln Technical Institute, North American Trade Schools, Or a auto parts store like what Napa used to at high schools. As a work shop for students to inspire our youth. To a honest working trade Automotive technology.
You inspiration to the common youth would be a plus. Maybe do some thing local at a local high school. Or Inspiration of a apprenticeship program? Just a idea that could spark a sponsor ship for you. Food for thought.
Regards Mike Tennent
Garbage. Why would I spend hours wiring this crap together? Put a connector on it like the factory.
Hell yeah!!! Those gauges are PIMP TIGHT!!!!
BOOSTEDMOTORSPORTS
HELL YEAH BROTHER...
🤔🚫🧢💯💪🎬🚛☁️🚛☁️🛻☁️🚐☁️🚐☁️
#BOOSTEDMOTORSPORTS #chickennuggies #MCDODGES #Hellram #HELLKOTA #BOOSTEDMOTORSPORTS2 #hellcatswaptheworld