PARKSIDE PLSD-60-C3 Soldering Station UPGRADE

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 31

  • @HYTMUAE
    @HYTMUAE Месяц назад +3

    Wow, good job. I like what you did and want to buy one and do the same.
    I like that Parkside decided to change their stupid escrow tips so that they can be easily changed.

    • @sanctuaryexpress
      @sanctuaryexpress 26 дней назад

      hey man, where can i find tips for the station that match this model?

    • @HYTMUAE
      @HYTMUAE 26 дней назад +2

      @@sanctuaryexpress This station is new for Parkside, but I think the "900M Soldering Iron Tip" will fit.

    • @EVCustoms
      @EVCustoms  25 дней назад +1

      Correct...

  • @Antony--DIY
    @Antony--DIY Месяц назад +1

    Εεε ρε ΚΑΛΛΙΤΈΧΝΗ... Για κάτι τέτοια είσαι μανούλα!!!😁🤩🥰
    Πολύ καλή ιδέα!!!👌

  • @sanctuaryexpress
    @sanctuaryexpress 26 дней назад +2

    hey man, nice upgrade! do you know where to find a tip replacement for the station?

    • @EVCustoms
      @EVCustoms  25 дней назад

      Yeap... it was difficult to find them.. (900M-T) here i have the link -
      a.aliexpress.com/_EGrnJky

  • @korytnacka7english
    @korytnacka7english 18 дней назад

    Is it compatible with some soldering tips like HAKKO 936?

  • @michaelkugelmann8399
    @michaelkugelmann8399 Месяц назад

    Where do you get more soldering tips for this soldering iron?

  • @Jean-Marc_38
    @Jean-Marc_38 Месяц назад +1

    Very interesting setup. The device consumes 60W at24V, which means 2.5 Amps. The battery designed to power the device should provide about 2 hours of maximum autonomy.

    • @EVCustoms
      @EVCustoms  Месяц назад +1

      Hi man... much more than 2 hours, because it's switching, autonomy is somewhere 4-5 hours..

    • @Jean-Marc_38
      @Jean-Marc_38 Месяц назад +2

      @EVCustoms Even 2 hours is already quite good. It's portable, so very useful. 👍

    • @demonchiki
      @demonchiki Месяц назад

      Взагалі можна було взяти тієї же фірми аккум 4,5а 18 в . Більша ємність і компактніше))

  • @demonchiki
    @demonchiki Месяц назад +1

    God gemacht!!
    Тільки я робив на Т12 жалах в машину на підвищуючому перетворювачи від прикурювача. Автомобільний аккумулятор завжди можна знайти , чи блок живлення для ноутбука.

  • @alessandroandrenacci2372
    @alessandroandrenacci2372 Месяц назад

    I like that tool you are using for soldering batteries ... can i have some info where i could buy it, and how much is quoted its price ?

    • @EVCustoms
      @EVCustoms  Месяц назад

      SEQURE SQ-SW3 STORE - sequremall.com/collections/spot-welder/products/sequre-sw3-energy-storage-spotwelder-lithium-battery-spotwelding?ref=EV_CUTOMS&variant=44125597434044

  • @Pendebatan
    @Pendebatan Месяц назад +4

    Just buy 24v solder on market.. Easy and cheaper no need any modified😅

    • @EVCustoms
      @EVCustoms  Месяц назад +3

      14euros station and 120w battery 17euros = 31euros for portable station?? believe me you will give more than 120 for cheap one..

    • @lik0M
      @lik0M Месяц назад

      Well..if you are afraid, lack of skill or just too lazy ot do any upgrades, fixes or just thinkering over some devices, why you need a solder at all? Your market is Jumbo 😃

  • @didiertoto4645
    @didiertoto4645 Месяц назад

    Très bien, mais pourquoi ne pas faire une épaisseur en impression 3D.
    Si quelqu'un veux bien le modéliser ce serait super.

  • @sodderbridge
    @sodderbridge Месяц назад

    Why not modify the internal power supply for charging?

  • @doogsm6013
    @doogsm6013 Месяц назад

    Nice mod but a lot of work and bulky! I normally use a Pinecil and power bank or my Ryobi 18volt 120watt iron for portable use. I also have a pretty decent butane iron but I rarely use it Most of my soldering is done on the bench and I have 3 different Yihua combination soldering stations at hand (hot air /iron, vacuum de-soldering gun/iron and tweezers/iron) plus a Weller 120 volt 150 watt gun and Weller 12 volt pencil (which sucks) as well as a couple of unregulated 120volt irons so it looks like I have a bit of a soldering iron fetish!

  • @korytnacka7english
    @korytnacka7english 18 дней назад

    Is PARKSIDE PLSD-60-C3 Soldering Station even ESD safe? There is no such information from the manufacturer!!

  • @serlo9466
    @serlo9466 Месяц назад

    I bought the previous version and it broke after a while.

  • @jernejfunkl8300
    @jernejfunkl8300 Месяц назад +1

    Waste of money for crap like Parkside :)

    • @EVCustoms
      @EVCustoms  Месяц назад +1

      I have 5 pieces of these 20V parkside batteries.. they are working 3 years non stop until now... the only thing they need is a tip only...

    • @jernejfunkl8300
      @jernejfunkl8300 Месяц назад

      @@EVCustoms You are a lucky man :)

  • @RJHElias
    @RJHElias Месяц назад +1

    If you want to get rid of your money, please subscribe 🤑