MGA Engine | Workshop Uncut | Car S.O.S.
HTML-код
- Опубликовано: 8 сен 2024
- #CarSOS
➤ Subscribe ➤ bit.ly/CarSos
Take one cherished car that has seen better days, add an owner in need of a helping hand. Fuzz Townshend and Tim Shaw secretly whisk the wheels away to a well equipped workshop before surprising the unsuspecting owner with their newly restored classic.
Follow us on Facebook ➡️ bit.ly/CarSosFB
Visit our website ➡️ bit.ly/CarSOSna...
Buy official Car S.O.S merch ➡️ bit.ly/CarSosShop
Фаз ,Тим вы такие молодцы дарите счастье ,радость ,людям рестврируя машины и презентируя хозяину ,спасибо вам ,приятно смотреть передачу авто сос
I love being a mechanic but always wanted to concentrate on rebuilding engines. Great work to watch these masters.
If you have space to take an engine apart and put it back together just do it, your tool kit as a mechanic should be quite sufficient. You can buy a single cylinder motorbike engine which needs work, for about £25. Take it apart, re-assemble it, and repeat as necessary. When you have done that a few times you can get it back to as-new condition, or just scrap it and try something else. When working with engines you need to be very good at taking measurements, this is more important than mechanical ability.If you can measure well it doesn't matter how many times you need to make adjustments to get things perfect, if you can't measure well things never will be perfect. I also recommend that you read 'Internal Combustion Engines' by Litchty. Go for it, and I wish you good luck with it.
I grew up fixing the A and B series engines in the 1970's. Loved working on these engines. Simple to tear down and repair, and parts were cheap and available at the time. Not like today, were my sisters 20 year old car was written of because a $5 part is no longer available, either new or used.
Fuzz my hero! you know how many timing belts i replaced using the best trick to do so learned from you? brilliant is not enough praise. cheers man!
Hello fuzz
Always a pleasure to see you,
Hello 😊
👍👍👍👍
Painful to see an engine which has been neglected to this degree.
it's simply worn out, been sitting for a few years and needs rebuilding. my '61 was equally worn out by the time i bought it in 1970 and needed rebuilding too. BITD engines needed periodic rebuilding (i.e. main and rod bearings, oil pumps, water pumps, rings and clutch plates) about every 50-100 thousand miles.
That story about Boris Johnson has put me off Fuzz. I always thought he was a gentleman, but I was wrong. M.
I wouldnt just dip my bits in Johnson's pint at the moment