Followed along with my first L3+ today. Worked like a charm and made a few cents during test phase. Going to follow along on the hiveos and fan swap soon. Thanks a lot for sharing!
My miner eth is lit up green and yellow flashing green. But the fault and and normal light won’t light up and my fans won’t ramp up. What do you think?
1,600 watts is correct for the input as in the power it uses from the wall, then the power output is 12v x 100Amp = 1,200 so it can provide up to 1,200 watts to the rig
hey there, really appreciate this. Not sure where you live, but I live in the Edmonton, AB area... and I'm looking at buying an L3+ soon perhaps (for $1700)... so weighing if it's worth doing it or not. I'm on the fence... what about the predicted bear market in near future? What about increased mining difficulty as soon as the L7s come online? Will this unit essentially become obsolete soon? Or would I have enough time to ROI? So many questions!
so many questions and really I am not sure lol cant really tell the future always rumors of a bear market and a bull market who knows whats coming if anything the stock market will go bears first.
@@RabidMining one more question for ya! As a fellow Albertan who knows our winters… do you think you could run this unit in an unheated garage in the winter? (I’m thinking this would be a heater in its own right! lol - plus it would keep the unit cool?)
I recently purchased a L3+. When I plugged it in I was glad when the first IP I tried brought up the sign in popup. I used root/root. WTF. It didn't work. What other user/password combos are there.. I've used root/admin and Blank combos but nothing seems to work. Will the reset button help with this issue.
Idk man I've done everything my miners work for 12-18 hrs and than they get disconnected from prohash. It picks up this other url-user-pass and my earnings stop. So I keep resetting every single day and it's such time consuming. And I'm losing tons of hours of non mining. Any Help?!
@@RabidMining tyred to other ones, litecoin pool, nice hash and it resets to some ones else url pass and user. Now it's getting worse I cant even mine for a minute. Anymore
Hey Rabid I just received a L3 plus in the post and it sounds like there maybe loose parts inside, is that normal? My only other Antminers are z9’s and they don’t do that. Thanks
@@RabidMining more like if I tip it front to back sounds like metal sliding across the bottom. I can definitely tell the sounds of the hash boards vibrating. Might have to open it up before firing it up so nothing shorts out.
Im considering ordering one of these miners to hopefully start out earnong some Dogecoin. Weather or not it ends up being profitable, im not really concerned with for right now. Im just now stepping into the crypto world and looking for something cheap enough and still somewhat relevant enough to learn with to help me decide if this is for me or not...if by some chance i do get this miner and have any issues with setup, could you maybe help me get it going, or at least point me in the right direction?
when I put in the ip adress on the web search, a tab poped up asking for username and passsword. Do I have a used miner? or how can I get the username and password for the ip
Thanks for the vid Rabid. Brand new to your channel. Imma watch this a few times to get this right on my L3+ 580. Meanwhile, can we do the same with Prohashing with an Innosilicon A6 (1.23G)? If so, could you do a quick vid on setting it up please>
nice video always , have always loved your videos , pls keep it up . Pls Sir i would really love if you can give me like an old Antminer (you dont really use anymore) so i can get started with mining thank you sir .
Still cool, do you have any for sale? I was wondering about a few things so I will run at my house at 120v and I can hook it up through a Ethernet port in a wifi extender cable?
Followed along with my first L3+ today. Worked like a charm and made a few cents during test phase. Going to follow along on the hiveos and fan swap soon. Thanks a lot for sharing!
No problem glad it helped
Can these stand alone? Or do they have to be on a cpu at all times?
My miner eth is lit up green and yellow flashing green. But the fault and and normal light won’t light up and my fans won’t ramp up. What do you think?
This is so helpful, no BS like a lot of the other RUclips channels I’ve watched.
Thank you
1,600 watts is correct for the input as in the power it uses from the wall, then the power output is 12v x 100Amp = 1,200 so it can provide up to 1,200 watts to the rig
Hello, thanks for your video. Quick question though. Is ProHasher what you use as a wallet for the Antminer?
No wallets are there own will still need one for the coin you are mining
hey there, really appreciate this. Not sure where you live, but I live in the Edmonton, AB area... and I'm looking at buying an L3+ soon perhaps (for $1700)... so weighing if it's worth doing it or not. I'm on the fence... what about the predicted bear market in near future? What about increased mining difficulty as soon as the L7s come online? Will this unit essentially become obsolete soon? Or would I have enough time to ROI? So many questions!
so many questions and really I am not sure lol cant really tell the future always rumors of a bear market and a bull market who knows whats coming if anything the stock market will go bears first.
@@RabidMining one more question for ya! As a fellow Albertan who knows our winters… do you think you could run this unit in an unheated garage in the winter? (I’m thinking this would be a heater in its own right! lol - plus it would keep the unit cool?)
@@bluefuzecom possibly yes should be ok
Hey where are u buying it from? I am in Ontario and very seriously looking for a legit website
I recently purchased a L3+. When I plugged it in I was glad when the first IP I tried brought up the sign in popup. I used root/root. WTF. It didn't work.
What other user/password combos are there.. I've used root/admin and Blank combos but nothing seems to work. Will the reset button help with this issue.
hmm maybe try all caps or make sure caps isnt on thats weird it should be root and root
Did you ever get this problem fixed?
Need a follow up.
I don't have wifi plag. Can I use mobile hotspot ? Wifi connection
Yup
@@RabidMining how sir ?
How many mine coin per day with this machine
I just got my L3 today will let you know
Also can flash a new bios from hiveos. Drops power and increases mhs
Yes I am running the hiveon asic firmware which is tomorrows video lol
What can I mine with Antminer L3 +
Anything scrypt so LTC, Doge, DGB few others
Thanks for the video.Helpful as always
No problem thx a lot.
i am currently setup with f2pool. Is Prohashing better ?
Prohashing is yes but currently it looks like mining dutch is the best I have some videos on it also.
@@RabidMining Thank you.
On f2pool i'm currently only on 5 dogecoin a day. Should be more?
@Turbo-smokey not sure what a L3+ is currently doing I am using a L9 now
@@RabidMining How much do you mine with a l9?
@Turbo-smokey depends on the daybut 200-250 doge a day
Idk man I've done everything my miners work for 12-18 hrs and than they get disconnected from prohash. It picks up this other url-user-pass and my earnings stop. So I keep resetting every single day and it's such time consuming. And I'm losing tons of hours of non mining. Any Help?!
Try a different pool?
@@RabidMining tyred to other ones, litecoin pool, nice hash and it resets to some ones else url pass and user. Now it's getting worse I cant even mine for a minute. Anymore
@@RabidMining could it be some type of virus? Can you send me the other link where you short out the chip?
I can't believe these were $30-$50 as recently as Jan 2021.
Should we buy this in 2021 or not
Not sure probably not as the power to profits is kinda a waste at this time.
Hey Rabid I just received a L3 plus in the post and it sounds like there maybe loose parts inside, is that normal? My only other Antminers are z9’s and they don’t do that.
Thanks
The hashboards kinda Rattle a bit does it work?
@@RabidMining more like if I tip it front to back sounds like metal sliding across the bottom. I can definitely tell the sounds of the hash boards vibrating. Might have to open it up before firing it up so nothing shorts out.
Ya won't hurt to check it out maybe a screw is rolling around
@@RabidMining I went ahead and tried it to see if it was just the boards, fans won’t spin and every few seconds something clunks.
Hmm not sure
What fan do you use for the l3?
6500 RPM
@@RabidMining Is the stock fan for l3 or you changed the fan? I want yo know because i bougth 3 PCS AND i want to reduce the noise
@@viralespopulares1073 its a different fan but still a loud 6500 RPM fan. Must be 4 pin as well.
I just got 3 of these cheap on eBay. Are you still mining with it? If so are you profitable? Some websites show it’s profitable with my 0.09kwh
9 cent power ya they are with this recent pump
Is this good now? Is it profitable? I'm 15 planning to buy one I found for around £120 . The power cost in the UK is around 0.3 usd per kw/h
Not at that power price :(
@RabidMining would a gpu mining rig be more profitable ? Also I think I was wrong about the energy price it might be slightly lower
Im considering ordering one of these miners to hopefully start out earnong some Dogecoin. Weather or not it ends up being profitable, im not really concerned with for right now. Im just now stepping into the crypto world and looking for something cheap enough and still somewhat relevant enough to learn with to help me decide if this is for me or not...if by some chance i do get this miner and have any issues with setup, could you maybe help me get it going, or at least point me in the right direction?
It is cheap for sure the new mini doge 3 plus is better.
I want one how much was it ?
Not sure what they are going for these days the price moves with the market.
when I put in the ip adress on the web search, a tab poped up asking for username and passsword. Do I have a used miner? or how can I get the username and password for the ip
Should both be root by default
@@RabidMining your the Best!
hi what is the blue chord used for and is it necessery
Ill answer your question. Its your ethernet cable. Needed
Muito bom. Aqui no Brasil não acha videos falando desta antiminer L3+.
I just bought one
!! thank you
Ahh nice it up and running?
Thanks for the vid Rabid. Brand new to your channel. Imma watch this a few times to get this right on my L3+ 580. Meanwhile, can we do the same with Prohashing with an Innosilicon A6 (1.23G)? If so, could you do a quick vid on setting it up please>
I do not have that ASIC to showcase so sorry I cant lol
is it true they can be ran on 120V?
Yup
Does the psu run on a 220v outlet?
Depends on the PSU yup use mine runs on 120v or 240v
@@RabidMining ok, thanks!
Whuere i can buy on usa???
nice video always , have always loved your videos , pls keep it up . Pls Sir i would really love if you can give me like an old Antminer (you dont really use anymore) so i can get started with mining thank you sir .
Eh thernet
Rabid mining. In my opinion. You suck on responding to your fan comments.
Alright then
Usually try to respond to everyone
wow super interested, im canadian here. 9$ on a ant miner l3 is awesome!
It's not like that anymore sadly
Still cool, do you have any for sale? I was wondering about a few things so I will run at my house at 120v and I can hook it up through a Ethernet port in a wifi extender cable?