So he’s using a piece of wood and a wood mallet to straighten the rim. Correct me if I’m wrong, but isn’t this exactly the way to reshape steel without leaving work marks? It seems like you can see him hitting the rim multiple times without leaving any marks.
Я получил огромное удовольствие от просмотра ❤ представил,что я тот парень, что сломал колесо. Нашёл этого мастера и он сделал колесо, как новое❤ те же чувства испытываю,когда забираю свой авто после длительного проф ремонта 🎉
Com certeza é. Esses caras são do Pakistao e lá eles conseguem com ferramentas caseiras e muita engenhosidade fabricar em metais praticamente tudo que você possa imaginar .
Esse é o país mais ecológico do mundo! Os caras reaproveitam tudo,com extrema dedicação e profissionalismo,só posso dizer que eles merecem tudo de bom.
The dexterity of the installation and naive spectators think that this Pakistani mechanic straightened out a rather complex rim profile in a couple of blows. Moreover, with deformations in the stiffeners. Such a defect can, in principle, be corrected, but the process will be quite long and special mandrels will be needed to restore the profile. An attentive viewer will notice that at the beginning of the video there will be four rims standing against the wall with his back to which this Pakistani guy will be working, and then surprisingly there will be three of them...)))
Where do you think those spare rims came from? He'll straighten the rim from this bike between other customer work. Notice the rim he used was also a used part. He didn't give up on straightening the dented rim, he used a better one because the customer was waiting.
@@alan_2056yeah, which is why when he pulled the tire from the "customers" rim there was mysteriously no tube to be seen 😂 because he magically made it disappear. Fake from the start my friend.
When we were 8 or 9 back in the 50's an old chap by the name of Bill Whittle had a bike shop that he would let us hang out of and do repairs on his forecourt to our bikes, a lot of which were made from parts grabbed from the local scrap yard anyhoo, Bill taught us how to straighten out dents and buckles using the spokes and a spoke spanner something I was able to pass onto my grandson, who couldn't seem to get how to ride a kerb, 50 years later but as for the damage I could see here I'm not so sure but hey who cares.
ما شاء الله على الشعب الباكستاني المسلم والله إني أحبكم في الله، الشعب الباكستاني الوحيد هو القادر أن يعيد رجاله استخدام كل شيء بتفان شديد واحترافية، والله لا يسعني إلا أن أرفع له القبعة وأقول إنه يستحق كل التقدير والإحترام .
Quanto tempo gasto para recuperar uma roda de motocicleta, trabalho manual cujo valor é menor que o preço de um aro e raios. Antes de criticar, conheça o meio onde eles vivem, quais suas dificuldades sua cultura - Suas habilidades são dignas de respeito - A sobrevivência está acima da segurança. How much time does it take to repair a motorcycle wheel, manual labor whose value is less than the price of a rim and spokes. Before criticizing, get to know the environment in which they live, their difficulties and their culture - Their skills are worthy of respect - Survival comes before safety.
That bent rim is scrap here in Canada and The United States. Not worth spending labor hours fixing it when a used or brand new is available at much lesser price.
Even if he swapped the rim, its some of a puzzle to get together all the spokes. Still respectful job. Maybe he swapped rims to make the vid look more perfect...this time. I am sure he could get the rim working, but not without marks or scratches. I've seen worse hoaxes, like gov-style scams ruining innocent people everyday etc.
Hmmm... the rim suddenly became round without any marks from the hammering, amazing.
Typical Indian trickery…
Nicht der geringste Kratzer oder Dellen vom Hammerschlag zu sehen, erstaunlich! 🤣
@@charlestisserand7947Die können sogar im Dreck sitzend zaubern. Klasse!
So he’s using a piece of wood and a wood mallet to straighten the rim. Correct me if I’m wrong, but isn’t this exactly the way to reshape steel without leaving work marks? It seems like you can see him hitting the rim multiple times without leaving any marks.
Они в тапках металл плавят, не удивляйся. )))))))))))
إحترافية ومهارة كبيرتين إنه العمل اليدوي
Öyle bükülmüş bir çember asla düzelmez
Doğru diyosun o başka bir çember
Yersen
Fake.
@@DartVader1984 absolutely
Я получил огромное удовольствие от просмотра ❤ представил,что я тот парень, что сломал колесо. Нашёл этого мастера и он сделал колесо, как новое❤ те же чувства испытываю,когда забираю свой авто после длительного проф ремонта 🎉
If this is the original bent rim, then this guy is incredible. Just lacing and truing and balancing a wheel is difficult. Good job.
Com certeza é. Esses caras são do Pakistao e lá eles conseguem com ferramentas caseiras e muita engenhosidade fabricar em metais praticamente tudo que você possa imaginar .
Fake
No dear I witness that with little tool they perfectly treat balance wheel
I don't know. You can fix little dents in aluminum alloy rims, but trying to fix a dent like that is bound to crack the rim.
@@serhiyranush4420 The rim is made of steel, not alu.
bravo Monsieur !
Esse é o país mais ecológico do mundo! Os caras reaproveitam tudo,com extrema dedicação e profissionalismo,só posso dizer que eles merecem tudo de bom.
Tak se podívejte jak recyklují autobaterie. Ekologické 😂.
@@petrstraka8582 escreva em português,sua mula !
По моему он просто другой обод поставил, а тот что был погнут в конце видео 8:38 валялся рядом с двумя другими🤣
точно,он так и сделал,развод для лохов.
100 пудов для просмотра , какие тока фокусы не увидешь аху.....ть
А то что 1:23 он снимает покрышку без камеры не смутило?
@@tulaabc жулик😅
Я тоже сразу обратил на это внимание
El cambio del aro roto por otro en buen estado no se ha notado demasiado🤣🤣🤣🤣
2:44 jackpot xD
Wow! Really, this is a very nice & excellent video.
Pra mim não é o mesmo aro, com aquela dobradura jamais ficaria liso e perfeito, até podera rodar mas com imperfeições
هذا صحيح
Muy buen arreglo!!!amigo!!!👍👏👏👏yo hace tiempo arregle una que estaba la mitad de doblada que esa!!!y que bien dentro de todo!!!😀
the skillful hands of a repairman can do even the impossible!😊
I wish the world had more people like this guy. Awesome work man
Muito bom o serviço, ficou top
El centrado de la rueda siempre es trabajoso y complejo, así mismo quedo excelente 👌 👏
La professionalità di questo artigiano è stata quella di sostituire il cerchio.
Yes.
This man has my deepest respect, he is the very definition of ‘make do’.
Amazing.
The dexterity of the installation and naive spectators think that this Pakistani mechanic straightened out a rather complex rim profile in a couple of blows. Moreover, with deformations in the stiffeners. Such a defect can, in principle, be corrected, but the process will be quite long and special mandrels will be needed to restore the profile.
An attentive viewer will notice that at the beginning of the video there will be four rims standing against the wall with his back to which this Pakistani guy will be working, and then surprisingly there will be three of them...)))
If this guy straightened the original bent rim as shown, then I am the president of USA. Blocking this channel.
@@olevaiti4302 I think that you were a better president than the current stumbling old man!))))
Where do you think those spare rims came from? He'll straighten the rim from this bike between other customer work. Notice the rim he used was also a used part. He didn't give up on straightening the dented rim, he used a better one because the customer was waiting.
@@alan_2056yeah, which is why when he pulled the tire from the "customers" rim there was mysteriously no tube to be seen 😂 because he magically made it disappear. Fake from the start my friend.
Incrível! E tudo feito no chão! Parabéns!
Mis respeto!!!! Muy profecional, quedo salida de fabrica. Bendiciones🇦🇷💖
ESPECTACULAR,,UN MAESTRO 🤝💪💪💪✍️
素晴らしい技術ですね
Very caring ,fully devoted mechanic,my personal best wishes as well as similar prayers to Almighty.
big respect from Germany
@@Michael-o3t1w thank you sir 🫡
А зачем он старый обод колотил? Мастерство показывал?
Затем что нового нет или дорого, что непонятно русский
@@alexsu9007А зачем он потом новый колотит, когда рядом старый валяется?
@@АлексейЕфимов-ц3к он старый колотил, что не понятно рузкий
@@КаримаКадыровна-е2о то есть он такой же глупый как и ты
Чтобы можно было в комментах выявить каклопитеков верящих в сказки и незнающих про возможности монтажа 🤣
He ran into a light post on a straight road in broad daylight?! Incredible!
A master at work! Well done.🇨🇮🇵🇸
When we were 8 or 9 back in the 50's an old chap by the name of Bill Whittle had a bike shop that he would let us hang out of and do repairs on his forecourt to our bikes, a lot of which were made from parts grabbed from the local scrap yard anyhoo, Bill taught us how to straighten out dents and buckles using the spokes and a spoke spanner something I was able to pass onto my grandson, who couldn't seem to get how to ride a kerb, 50 years later but as for the damage I could see here I'm not so sure but hey who cares.
Good job
Ok 👍 to są fachowcy , specjaliści wysokiej klasy
bravo monsieur
Very Very good
An great work
Very well done.
Das hätte in Deutschland niemand gemacht.
Eine super Handarbeit.
Vielen Dank für den schönen Beitrag.
Germany
Da arbeitet auch niemand um einen Stundenlohn von 0,50€ ! 🤣
@@charlestisserand7947 Ich dachte da mehr an Lustlosigkeit....
This would not be legal in some countries, a new rim and spokes would be needed.
@@alan_2056 Legal is fiction. Fiction is to control and make profit for "the owners...".
Nobody would throw away a bent rim and swap it for a new one? Because that's all he did...
MashAllah
Zabardast karigar
Amazing talent 👏
ما شاء الله على الشعب الباكستاني المسلم والله إني أحبكم في الله، الشعب الباكستاني الوحيد هو القادر أن يعيد رجاله استخدام كل شيء بتفان شديد واحترافية، والله لا يسعني إلا أن أرفع له القبعة وأقول إنه يستحق كل التقدير والإحترام .
Yes!
Despite the lies
Dit is echt vakwerk heel mooi gedaan👍
Super❤....ALBANIA 🇦🇱
I can't believe I saw it myself...a craftsman's hand
That is very skillful........................ a pleasure to watch.
SUPER WORK❤❤❤❤❤
It's a very good result.
So good...one would believe they swapped the bent rim for another, straight, one.... 😂
The rim is a new old one... :)
ឡូយមេមេ😮
Good skills baljeet
Respect !
🎉super
Nice job bhai sab
Senzational!!!!
Master !!!!!
Pode ser que o aro tenha sido trocado por um outro em melhor estado. É difícil recuperar um aro sem deixar marcas.
Nice
NOT the same rim!!!!
Very good
Kamal Ast.... 👌
Вообще молодцы
Отличная работа.
No inner tube on a tube tyre and no hammer marks! These must be magicians.
An incredible story, when removing the tire - 1:23, it is revealed that the tube is missing - the episode is rigged.
at 8:38 you can see the bent rim on the right hand side bottom of the screen.
The 3 rims? One is split-broken.
I think he cheated in this vid, but he may have other rims laying around aswell :)
Perfekt 😊
Heel erg knap zeg wauw.
There are some peoples how believe it's not real but I witnessed in Pakistan 🇵🇰 there are very amazing workers and do work with very little machines
@@EUROSPORTS4TECH respect 🫡
Bro, he pulled the tire off and there was no tube...it was fake from the start. Pay attention.
But also, I have a bridge to sell you.
India people very bright very talented
@@nestorechavez this is Pakistani artisan
@@globalartiisans ohh I'm sorry sir Im just admiring your great job Pakistan is great
this guy is Pakistani not Indian
Very scammy, very fake.
real bikers
Akurat ze pouzil iny rafik, nevyrovnal povodny...
Quanto tempo gasto para recuperar uma roda de motocicleta, trabalho manual cujo valor é menor que o preço de um aro e raios. Antes de criticar, conheça o meio onde eles vivem, quais suas dificuldades sua cultura - Suas habilidades são dignas de respeito - A sobrevivência está acima da segurança.
How much time does it take to repair a motorcycle wheel, manual labor whose value is less than the price of a rim and spokes. Before criticizing, get to know the environment in which they live, their difficulties and their culture - Their skills are worthy of respect - Survival comes before safety.
These truths have been obscured in out consumer driven culture. Lets all bring them back.
That bent rim is scrap here in Canada and The United States. Not worth spending labor hours fixing it when a used or brand new is available at much lesser price.
This will alter with Donald Trump. Your work will become more worth. Just wait and see.
I like the....voices!
Excellent
True master...just needs a bench
The bent rim is just behind him 7:18 😂 great job though!
The driver took a jump in the ditch. Meanwhile some metal artists fixed his bent rim.
Hello ❤❤❤🎉🎉🎉
@@LanDaiLyLife yes
Increible.
Kemah ngat towing
мухлеж, обод подменили!
Ай шайтан!
No te kleo dijo el chinitoo ... 😂
Rim swaps at 2:49 What a hoax !
Even if he swapped the rim, its some of a puzzle to get together all the spokes.
Still respectful job.
Maybe he swapped rims to make the vid look more perfect...this time. I am sure he could get the rim working, but not without marks or scratches.
I've seen worse hoaxes, like gov-style scams ruining innocent people everyday etc.
Покрышку снял, а камеры нет. Он на ободе что ли ехал? По одному гнутому ободу постучал, потом взял другой, переспицевал ступицу и готово.
Most of the world works on the ground, don't be snobs saying he needs a workbench.
What happened to the empty rim that was leaning against the wall
Nice video
Respect 🫡
Nice video very good kob👍
آفرین😂
Та ладно там, випрямив чи поміняв. Тут питання як його погнуть так можна?
it seems the broken rim was not the one used here, it might be changed. ???
Bớt giỡn đi bạn hiền làm phải cho thấy thực tế nha bạn
o cara trocou a calhar
👍👍👍
o Aro não é o Mesmo, eles trocaram podem reparar a fisionomia de um aro para o outro.
Not the same rim
ممتاز
La llanta fue reutilizada para trollear a 500mil personas😂
Magnus genus.
He hide tha fact that he CHANGE the rim because he can not straightened the bended rim !
Change rim
I have machine wheel spoke balance any rim accident with in five minutes start
❤👍🏾🇦🇷👋🏾
Do they heard about tables?